Mijing GK17 PCB Motherboard Repair Fixture – Insulated Glass
₨ 1
Insulated Glass PCB Fixture for Mobile Repair
The Mijing GK17 PCB Motherboard Repair Fixture gives your bench a toughened insulated glass platform for holding phone mainboards during hot air rework, IC removal, and reballing. The high-temperature resistant glass panel wipes clean after flux and rosin work, and the concealed threaded rod keeps soldering residue off the adjustment thread. At 146 x 95 mm, it suits technicians who handle dead phone boards, charging issue repairs, and CPU or IC chip jobs every day. Mechanicpk supplies this Mijing GK-series fixture to repair shops and service centers across Pakistan as a universal, non-device-specific PCB holder.
Out of stock
Mijing GK17 Insulated Glass Fixture for Stable PCB Rework
The Mijing GK17 PCB Motherboard Repair Fixture holds a phone mainboard still while you apply heat and solder to it. Mijing builds the GK series around a toughened insulated glass panel, and the GK17 brings that design to a 146 x 95 mm universal PCB holder. You get a flat, heat-resistant, non-conductive surface that suits repair shops handling dead phone, charging issue, and hang on logo jobs every day. Mechanicpk lists it under PCB Holders for technicians who want a clearly specified fixture instead of an improvised clamp. The sections below explain what the glass panel does, where the fixture fits in your workflow, and how it sits inside the GK range.
Toughened Insulated Glass Panel and Heat Handling
The panel uses toughened insulated glass that resists high temperature, so the hot air from your station does not warp or soften the platform under the board. Glass does not conduct electricity, which keeps the board off bare metal while you probe rails with a multimeter and lowers the risk of an accidental short. Flux, rosin, and resin residue wipe off the smooth surface with isopropyl alcohol, so the fixture stays clean between jobs. The GK-series design also hides the threaded connecting rod, which keeps welding oil and rosin from sticking to the thread. The opening lets you angle the hot air nozzle so heat reaches the underside of the chip, and the large opening chamfer gives double-layer motherboards room to sit in the clamp. If you work through dozens of boards a week, a panel that cleans fast saves real bench time.
Where the GK17 Fits in Your Repair Workflow
Place the GK17 between diagnostics and final testing. After you trace a fault with a multimeter and microscope, you clamp the board, lift the faulty IC with a hot air station, clean the pads, and reflow or reball the replacement. The same fixture holds the board for charging IC change, PMIC replacement, and CPU chip removal on dead phone boards. The universal design takes iPhone logic boards and Android mainboards in the same fixture, so you do not buy a separate holder for each brand. For boards that need ISP or eMMC access, clamp the board here while you solder your ISP Pinout Tool wires, then move to your eMMC Programmer or UFS Adapter for the read and write step. Keep the nozzle moving in small circles and preheat the board edge first, so the panel and the board warm evenly. After the rework, power the board through your test box or bench supply to confirm the fix before you assemble the phone. The fixture does not replace a stencil-based reballing process, so pair it with Reballing Kits and a Soldering Station for full IC-level work.
Choosing the GK17 Inside the Mijing GK Range
The Mijing GK range runs from the compact GK11 Mini and GK12 Mini up to GK17, GK18, and GK19, so you choose by board size and bench layout. The GK17 sits at the larger end of that lineup at 146 x 95 mm, which suits shops that switch between different phone boards on one bench. If you mostly work on small boards under a microscope, a smaller GK model may fit your setup better. When your jobs demand tilt and rotation on several axes, step up to a multi-axis metal fixture such as the Mijing K23 series for dual-shaft holding. Whichever model you choose, keep a second PCB Holder on the bench so you can prepare the next board while the first one cools. Mechanicpk supplies Mijing fixtures to repair shops, service centers, and training institutes across Pakistan, so measure the largest board you service against the 146 x 95 mm footprint, then check current price and stock on this page before you order.
| Weight | 0.4 kg |
|---|
Key Features
- ✓Toughened insulated glass panel
- ✓High-temperature resistant platform for hot air work
- ✓Easy-to-clean glass surface
- ✓Concealed threaded connecting rod keeps welding oil and rosin off the thread
- ✓Large opening chamfer for double-layer motherboard repair
- ✓Angled hot air access so heat reaches the underside of the chip
- ✓Universal PCB holder design
- ✓146 x 95 mm footprint
Specifications
| Brand | Mijing |
|---|---|
| Model | GK17 |
| Category | PCB Holder / Motherboard Repair Fixture |
| Compatibility | Universal — not device-specific |
| Technology | Toughened insulated glass panel |
| Material | High-temperature resistant toughened insulated glass panel |
| Dimensions | 146 x 95 mm |
Common Repair Uses
- ✓Holding the board steady for hot air and soldering work
- ✓IC removal and replacement with a hot air station
- ✓CPU chip removal and reflow
- ✓BGA reballing support
- ✓Charging IC and PMIC replacement
- ✓Board cleaning and flux or resin residue removal
- ✓Pad cleaning after IC lift
- ✓Double-layer motherboard separation and rework
- ✓Holding the board while you solder ISP or test wires
Compatible Devices
- ✓Universal PCB holder — verified scope is general mobile phone mainboards, not a device-specific list
- ✓Universal mobile phone mainboards (not device-specific)
- ✓iPhone logic boards that fit the fixture
- ✓Android phone mainboards that fit the fixture
- ✓Double-layer (stacked) motherboards, supported by the large opening chamfer
- ✓Mobile phone CPU and IC chip repair jobs
- ✓Other small PCB mainboards that fit within the 146 x 95 mm fixture
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the GK17 hold double-layer motherboards for IC and CPU repair?
Is the GK17 glass panel safe for hot air rework and powered board checks?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



