YCS CP01 LCD Screen Separator Heating Pad
₨ 9,500
Precision Heating for Screen Separation
The YCS CP01 LCD Screen Separator Heating Pad gives your repair bench a flexible heating platform for softening adhesive before you open a phone or tablet. A temperature control knob sets the surface anywhere from 30°C to 120°C, and the 80W–150W element runs on AC 100–240V, 50/60Hz mains. A reserved camera hole keeps the lens area away from direct heat while the rest of the panel warms. If your shop handles daily screen replacement and back cover jobs, this pad turns the preheat step into a repeatable, controlled routine across phones and tablets.
In stock
YCS CP01 LCD Screen Separator Heating Pad: Controlled Heat for Display Removal
The YCS CP01 LCD screen separator heating pad solves the first problem in every display or back cover job: adhesive that bonds the panel to the frame. Instead of pointing a hot air gun at the glass and guessing, you set the temperature on a knob and let a flexible heating surface do the preheating. The pad covers 30°C to 120°C and draws 80W to 150W at maximum, which suits a bench that opens phones all day. It accepts AC 100–240V at 50/60Hz, so it runs on the mains supply in a typical workshop or service center. Mechanicpk supplies it to technicians who want a repeatable preheat step instead of improvised heat.
The CP01 targets one job and does it with a short, clear feature set. That focus makes it easy to place in a workflow, easy to train a new technician on, and easy to replace if a shop wants a second unit at another bench.
Key Technical Highlights
The control surface is a single temperature knob with a verified range of 30°C to 120°C. You start low for a heat-sensitive display, raise the setting in steps, and hold the temperature once the adhesive gives. That control range lets you match the heat to the device in front of you instead of running one fixed temperature on every job.
The heating element uses a flexible heating material, which lets the surface follow the back of a phone or tablet instead of leaving air gaps. A reserved camera hole sits in the pad and keeps the lens area away from direct heat while the rest of the panel warms. The listed 80W to 150W maximum power rating tells you the load to plan for when several benches share one power strip. The pad comes with a US plug or EU plug option, so match the plug to your outlet or adapter before you order. Keep the switch and power junction away from water and liquid cleaners, because moisture near the controls creates a short-circuit risk.
Where a Screen Separator for Mobile Repair Fits Your Workflow
A screen separator for mobile repair sits at the very start of the job. A customer hands you a phone with a display problem, a cracked LCD, or a charging issue that needs board access. You preheat the pad, place the device on it, and wait for the adhesive to soften. Then you separate the LCD or lift the back cover with your opening tools and move on to the real diagnosis. A controlled preheat at this stage protects the display flex and the frame edge, both of which take damage when a technician rushes the opening step with uncontrolled heat.
After separation, the pad hands off to the rest of your bench. Once the board is exposed, a microscope helps you inspect connectors and damaged traces, a PCB holder keeps the board steady, and a multimeter confirms the hardware fault before you pick up a soldering station or a hot air station for IC work. If the board needs a chip lifted, a reballing kit completes that stage. The heating pad does not replace those tools. It opens the door to them, and a dependable opening step saves time on every job that follows.
Why Technicians Choose This Pad for Daily Screen Jobs
Repeatability decides most purchases at a repair counter. When you use the same pad, the same knob position, and the same wait time on a familiar model, you learn exactly how that adhesive behaves. Write down the knob position that works for each common model, and your next job on the same device starts from a known setting. The camera hole supports that routine because it protects a delicate part without a manual workaround each time.
Shop owners also gain flexibility. The 100–240V input makes the pad easy to move between benches, and one unit covers mixed screen and back cover work on phones and tablets. As your workshop grows, the CP01 pairs naturally with a hot air station for local heating and with a microscope for board-level work, giving you a clear upgrade path from basic screen separation to full chip-level repair.
Buyers in Pakistan often compare tools on spec and fit, not on brand slogans, so check the temperature range, input voltage, and plug type against your bench before you buy. The YCS CP01 LCD screen separator heating pad gives you a clear answer on each of those three points, and that clarity makes it an easy addition to a professional repair setup.
| Weight | 1.3 kg |
|---|
Key Features
- ✓Temperature control knob with a 30°C–120°C range
- ✓Flexible heating material for contact with phone and tablet surfaces
- ✓Reserved camera hole that keeps the lens area away from direct heat
- ✓Designed for LCD screen and back cover separation
- ✓80W–150W maximum power rating
- ✓AC 100–240V, 50/60Hz input
- ✓US plug or EU plug option
- ✓Suitable for both mobile phones and tablets
Specifications
| Brand | YCS |
|---|---|
| Model | CP01 |
| Category | LCD Screen Separator / Repair Heating Pad |
| Compatibility | Mobile phones and tablets (universal, not device-specific) |
| Technology | Flexible heating element with temperature control knob |
| Temperature Range | 30°C–120°C |
| Input Voltage | AC 100–240V, 50/60Hz |
| Power Rating | 80W–150W (maximum) |
| Plug Options | US plug or EU plug |
Common Repair Uses
- ✓LCD screen separation before display replacement
- ✓Back cover removal for battery or board access
- ✓Adhesive softening before pry-open on glued devices
- ✓Preheating a device before opening it for a hardware fault inspection
- ✓Display problem repair that starts with panel removal
- ✓Charging issue repair that needs board access
- ✓Controlled preheat while protecting the camera area
- ✓Repeatable opening routine for high-volume screen jobs
Compatible Devices
- ✓Universal mobile phone and tablet coverage. The listing names no specific models.
- ✓Mobile phones that need LCD screen separation
- ✓Mobile phones that need back cover separation
- ✓Tablet screens that need adhesive softening
- ✓Tablet back covers that need preheating
- ✓Devices with a rear camera area that needs protection from direct heat
- ✓Phones and tablets from any brand, since compatibility is not model-specific
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature range does the YCS CP01 heating pad support?
Can the YCS CP01 run on both 110V and 220V power?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



