Qianli Bumblebee Stencil (QS47) SAM8 Samsung Exynos CPU
₨ 600
Exynos 3471 / 7580 / 7880 Reballing Stencil
The Qianli Bumblebee Stencil (QS47) SAM8 gives your bench a dedicated Samsung Exynos BGA reballing stencil for the Exynos 3471, 7580 and 7880 CPU. Qianli designs it with square holes and rounded corners, so you get a clean ball pattern when you reflow. It covers the Galaxy A5 (2017) A520, A3 (2016) A310, S5 mini, A7, A5, A3, S5 and J7 boards that Qianli lists for this model. Use it after a CPU lift on a dead phone, a boot loop issue or a hang on logo that traces back to the processor’s solder joints. Pair it with a hot air station, flux and a microscope for a repeatable reball.
In stock
Qianli QS47 SAM8: Samsung Exynos BGA Reballing Stencil for CPU Rework
The Qianli Bumblebee Stencil (QS47) SAM8 is a Samsung Exynos BGA reballing stencil for three processors: Exynos 3471, Exynos 7580 and Exynos 7880. If your bench sees older Galaxy A-series, J-series and S5-family boards, this stencil gives you a ball pattern that matches the CPU instead of a universal template that almost fits. Mechanicpk supplies it to technicians and repair shops that already run reballing as routine board-level repair and want repeatable results on every Exynos job.
Technical Highlights of the QS47 Stencil
Qianli designs the Bumblebee series as BGA reballing stencils with square holes and rounded corners, and distributor listings for the series credit updated materials and surface treatment for added precision and durability. QS47 applies that design to one chip family: Samsung Exynos 3471, 7580 and 7880. The model code defines the coverage, so you choose it by CPU marking rather than by phone name. Read the marking on your processor before you start, because QS47 covers only these three Exynos chips. Boards with a different Samsung processor need their own Bumblebee model, and Qianli numbers those separately across its Exynos and Snapdragon range. Clean the stencil with isopropyl alcohol after each job and store it flat, so flux residue never clogs the apertures.
Compatible Galaxy Boards and Exynos Chip Coverage
Qianli lists QS47 for the Galaxy A5 (2017) A520, Galaxy A3 (2016) A310, Galaxy S5 mini, Galaxy A7, Galaxy A5, Galaxy A3, Galaxy S5 and Galaxy J7. These phones reach Pakistani workshops as a dead phone, a boot loop issue, a hang on logo case or a charging issue that diagnosis traces to a hardware fault around the processor. Once you confirm the CPU is the problem, you reball the chip instead of replacing the whole board. Treat the phone list as a starting point and confirm the processor marking on each board, since Samsung used more than one chipset across some of these model names. The stencil sets the ball pattern, but your solder balls, flux, temperature control and pad cleaning decide whether the new joints hold.
Where QS47 Fits in Your Reball Workflow
Start with diagnosis. A multimeter and a test box show you whether the board draws abnormal current or fails to power on, and a microscope reveals lifted pads and cracked joints. Pull the CPU with a hot air station, clean the pads on a PCB holder, and clean the chip itself. Lay the QS47 stencil over the Exynos chip, align the apertures under the microscope, and fill the holes with solder balls from your reballing kit. Heat the chip until the balls melt and settle, let the board cool, and lift the stencil. Refit the chip with your soldering station and hot air station. After the board powers on, reflash through ISP pinout tools or an eMMC programmer when the phone shows dead after flash behavior or an FRP lock. For newer phones with UFS storage, your upgrade path runs through UFS adapters and heavier rework equipment.
A universal stencil sheet forces you to hunt for the nearest pitch and work around mismatches. A chip-specific stencil removes that step. You align once, fill once, and get a ball layout built for the Exynos CPU in front of you. Hardware fault jobs on older Samsung phones still reach Pakistani repair shops, and a customer with a dead phone wants a firm quote, not a hunt for a replacement board. Reballing a known chip with the matching stencil lets you quote with confidence and finish the job on one bench. Shop owners get consistent output across technicians, and training institutes get a clear teaching tool for BGA reballing on a common Samsung platform. Keep this Samsung Exynos BGA reballing stencil beside your reballing kits so the next Exynos 7580 or 7880 job starts without a parts search.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Dedicated ball pattern for Exynos 3471, 7580 and 7880 CPU
- ✓Square holes with rounded corners for clean ball seating
- ✓Qianli Bumblebee series build with updated materials and surface treatment
- ✓Covers eight Galaxy A, S5 and J7 model families listed by Qianli
- ✓Removes the pitch-matching guesswork of universal stencil sheets
- ✓Works with your hot air station, flux and reballing kit
- ✓Cleans with isopropyl alcohol and stores flat for repeat use
- ✓Suits repair shops, service centers and training institutes
Specifications
| Brand | Qianli |
|---|---|
| Model | QS47 |
| Category | BGA Reballing Stencil (Bumblebee Series) |
| Compatibility | Samsung Exynos 3471, 7580 and 7880 CPU |
| Supported Devices | Samsung Galaxy A520, A310, S5 mini, A7, A5, A3, S5, J7 |
| Technology | Square-hole, rounded-corner BGA stencil |
Common Repair Uses
- ✓CPU-level reballing on Samsung Exynos 3471, 7580 and 7880 boards
- ✓Reballing an Exynos CPU after a hot air lift on a dead phone
- ✓Restoring solder joints when diagnosis points to the processor on a boot loop issue
- ✓Reballing the CPU for a hang on logo fault traced to the chip
- ✓Refitting a cleaned donor Exynos chip onto a repaired board
- ✓Reballing after a drop-related hardware fault near the processor
- ✓Board-level work on a charging issue once the CPU is confirmed as the cause
- ✓Preparing the chip for a repeatable reball in a multi-technician workshop
- ✓Hands-on BGA reballing practice in repair training
Compatible Devices
- ✓Samsung Galaxy models built on the Exynos 3471, 7580 and 7880 CPU, as listed by Qianli for QS47
- ✓Samsung Galaxy A5 (2017) A520
- ✓Samsung Galaxy A3 (2016) A310
- ✓Samsung Galaxy S5 mini
- ✓Samsung Galaxy A7
- ✓Samsung Galaxy A5
- ✓Samsung Galaxy A3
- ✓Samsung Galaxy S5
- ✓Samsung Galaxy J7
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which Exynos chips does the QS47 stencil support?
Can I use QS47 on Galaxy A7 and J7 boards?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



