Amaoe Stencil SM8450 0.12mm BGA Reballing Stencil

₨ 599

SM8450 BGA Reballing Stencil

The Amaoe Stencil SM8450 is a 0.12mm steel mesh SM8450 BGA reballing stencil built for Qualcomm Snapdragon 8 Gen 1 CPU work. You lay it over a cleaned chip, spread solder paste through the apertures, and reflow to get a fresh, evenly sized ball array on the pads. Technicians use it on Xiaomi 12 Pro, iQOO 9 Pro and Realme GT 2 Pro boards after an IC change, or when a dead phone or hardware fault traces back to the CPU solder joints. Mechanicpk supplies it to Pakistani repair shops that want exact SM8450 coverage instead of a generic universal template.

In stock

15 People watching this product now!
Description

Amaoe Stencil SM8450 for Snapdragon 8 Gen 1 CPU Reballing

Flagship boards built on the Qualcomm Snapdragon 8 Gen 1 (SM8450) leave no room for guesswork at the reballing stage. The Amaoe Stencil SM8450 is a 0.12mm steel mesh SM8450 BGA reballing stencil that gives you a fixed aperture layout for this chipset, so every ball lands exactly where its pad sits. Mechanicpk stocks it for repair benches that handle Xiaomi, iQOO, Realme and Samsung flagships and want a chipset-specific template instead of a universal one. You pick it up, align it, and print the ball array without improvising.

Technical Highlights of the 0.12mm Steel Mesh Template

The mesh thickness sets how much solder paste each aperture deposits, and 0.12mm is the working thickness Amaoe uses across its Qualcomm CPU stencil range for fine-pitch packages. Steel keeps its shape under heat, so you wash the stencil with flux remover and isopropyl alcohol after each job and reuse it. The SM8450 designation names the exact target: the Snapdragon 8 Gen 1 application processor, not neighbouring Qualcomm parts such as the SM8350 or SM8550. Check the marking on the chip under a microscope before you order. A mismatched template wastes paste, time and sometimes the chip itself.

A BGA stencil works as a printing mask. Each aperture meters a small, repeatable volume of paste or guides a single sphere onto one pad. When you heat the chip, surface tension pulls that volume into a uniform ball. That repeatability is what separates a clean reball from a hand-tinned chip with uneven joints.

Where It Fits in Your CPU Reballing Workflow

Reballing sits after removal and cleaning. You lift the SM8450 CPU with a hot air station, clear old solder from the chip and the board pads with flux and wick on a soldering station, and inspect the pads under a microscope. You then fix the chip in a reballing kit or platform, set the stencil over it, align every aperture with a pad, and spread paste or drop spheres. A short pass of controlled heat forms clean balls. Reseat the chip on the board, which you hold flat in a PCB holder, and reflow it. After reassembly, check the main rails with a multimeter before you power the board.

Technicians run this routine when a dead phone traces back to a cracked or lifted ball under the CPU, or when a hardware fault appears after a drop or an overheating event. It also covers a full IC change when you move a working CPU onto a new board.

Why Technicians Choose a Chipset-Specific SM8450 Stencil

A dedicated stencil cuts alignment time because the aperture field already matches the package. You repeat the same result on the second and the fifth board of the day, and that consistency matters on Snapdragon 8 Gen 1 devices such as the Xiaomi 12 Pro, iQOO 9 Pro and Realme GT 2 Pro, where each job carries a premium repair price.

Buyers who run a repair shop or service centre in Pakistan also gain a simple stocking decision. One stencil per chipset keeps your bench organised and lets each technician pick the right template without a trial fit. Pair it with quality solder paste or spheres, steady heat from your hot air station, and a microscope for pad inspection. When your SM8450 volume grows, step up to a full platform with a magnet base so you fix the chip without holding it by hand.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 0.12mm steel mesh construction for controlled paste deposit
  • SM8450-specific aperture layout for Snapdragon 8 Gen 1 CPUs
  • Reusable after cleaning with flux remover and isopropyl alcohol
  • Heat-stable steel that holds aperture position across reflow cycles
  • Repeatable ball size across multiple boards
  • Fits a standard reballing kit or platform workflow
  • Cuts alignment time compared with a universal template
  • Suits workshops that repair Xiaomi, iQOO, Realme and Samsung flagships

Specifications

BrandAmaoe
ModelSM8450
CategoryBGA Reballing Stencil
CompatibilityQualcomm Snapdragon 8 Gen 1 (SM8450) CPU
TechnologyBGA stencil for solder paste printing and tin planting
MaterialSteel mesh
Thickness0.12mm

Common Repair Uses

  • SM8450 CPU reballing after chip removal
  • Tin planting on a cleaned Snapdragon 8 Gen 1 processor
  • Ball replacement after drop damage
  • Dead phone with suspected cracked CPU solder joints
  • Hardware fault after overheating
  • CPU transplant onto a replacement board during an IC change
  • Board refurbishment where a lifted CPU needs fresh balls
  • Reballing a chip for reuse after rework

Compatible Devices

  • Devices built on the Qualcomm Snapdragon 8 Gen 1 (SM8450) chipset. Confirm the CPU marking before use.
  • Qualcomm Snapdragon 8 Gen 1 (SM8450) CPU
  • Xiaomi 12 Pro
  • Xiaomi 12
  • iQOO 9 Pro
  • Realme GT 2 Pro
  • OnePlus 10 Pro
  • Samsung Galaxy S22 series (Snapdragon 8 Gen 1 variants)

FAQ

What is the product name?
The product name is Amaoe Stencil SM8450.
What is the brand of this product?
The brand of this product is Amaoe.
What is the model of this product?
The model of this product is SM8450.
What is this product used for?
This product is used for reballing the Qualcomm Snapdragon 8 Gen 1 (SM8450) CPU with solder paste or solder spheres.
Which devices are compatible with this product?
This product suits devices built on the Qualcomm Snapdragon 8 Gen 1 (SM8450) chipset, such as the Xiaomi 12 Pro, iQOO 9 Pro and Realme GT 2 Pro.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can I use this stencil on other Snapdragon chips such as the SM8350 or SM8550?
No. This template targets the SM8450 only. Check the marking on your chip under a microscope and order the stencil that matches that chipset.
What does the 0.12mm thickness mean for CPU reballing?
The 0.12mm steel mesh sets the volume of paste each aperture deposits, which decides the size of the finished ball after reflow.