338S00942 Power IC for iPhone 14 Series Repair

₨ 1,400

338S00942 PMIC for iPhone 14 Series

The 338S00942 is a power management IC for the iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max. It controls how power moves across the logic board, so a faulty unit often appears as unexpected shutdowns, overheating, charging faults or a dead phone that will not power on. Replacing this chip demands a precise board-level workflow: controlled heat, clean pads, correct orientation and a short-check before power-up. This listing gives verified model and compatibility details for professional repair benches.

16 People watching this product now!
Description

338S00942 Power IC Replacement for iPhone 14 Series

The 338S00942 power IC is the power management chip fitted to the iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max. It regulates and distributes power across the logic board, so a fault in this component can look like several different complaints at the counter. A dead phone that will not power on, a unit that shuts down under load, or a handset that overheats and refuses to charge can all trace back to this chip. For technicians working on Apple boards, correct identification of the part number comes first, before any heat reaches the board.

Where This Chip Sits in the Power Path

On an iPhone 14 board, the power management IC takes energy from the battery and charging circuit, then supplies regulated voltages to the processor, memory and other subsystems. Every stage depends on this chip starting in the right order, so power sequencing is the most useful way to read its behaviour. When that sequence breaks, the phone may flash the logo briefly, reboot in a loop or stay completely silent. Understanding the flow helps you read symptoms accurately instead of swapping parts by guesswork. Treat the chip as one link in a chain, and test the upstream battery and charging paths before you condemn it.

Symptoms That Justify Testing the 338S00942

The most common complaints linked to this component are unexpected shutdowns, overheating, charging problems and failure to power on. Each of these overlaps with battery faults, charging port damage, short circuits and processor-side issues, so a single symptom rarely proves anything on its own. Start with a visual inspection under a microscope, then check the main rails for shorts with a multimeter before applying power. If the board draws abnormal current or shows heat concentrated around the power area, the IC becomes a strong suspect. Record your readings before removal so you can compare them after the repair.

Replacement Workflow and Bench Setup

A clean replacement depends on controlled heat and careful pad work. Use a hot air station at a moderate, steady temperature and preheat the board from underneath with a PCB holder so it does not warp. Lift the chip only when the solder reflows evenly, then clear the pads with flux and solder braid. Inspect the pads under magnification for lifted traces before you place the new IC. Alignment matters more than speed, so confirm the orientation marking against the original footprint. If you plan to reuse the removed chip, a reballing kit and stencil give it a fresh ball grid. In a shop handling a dead phone, this job is commonly called IC change karna, but the discipline stays the same. Finish with a multimeter check for shorts before you power the board, because a rushed install can turn a simple IC change into a second fault. Pair this workflow with a stable soldering station, quality multimeters and a microscope, and keep the rest of your rework tools aligned with the same standard.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Replacement power management IC for the iPhone 14 series
  • Covers iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max
  • Part number 338S00942 for direct identification on the board
  • Suited to professional board-level repair on Apple devices

Specifications

Model338S00942
CategoryPower Management IC (PMIC)
CompatibilityiPhone 14, iPhone 14 Pro, iPhone 14 Pro Max
Supported DevicesApple iPhone 14 series

Common Repair Uses

  • Board-level power path repair on the iPhone 14 series
  • Dead phone that fails to power on
  • Unexpected shutdowns under load
  • Overheating concentrated near the power area
  • Charging problems traced to the power path
  • Board-level power IC replacement with hot air rework

Compatible Devices

  • Apple iPhone 14 series, specifically the iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max
  • Apple iPhone 14
  • Apple iPhone 14 Pro
  • Apple iPhone 14 Pro Max

FAQ

What is the product name?
The product name is 338S00942 Power IC.
What is this product used for?
This product is used to replace the power management IC on the iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max during board-level repair.
Which devices are compatible with this product?
This product is compatible with the iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers and professional users.
Which iPhone models use the 338S00942 power IC?
The 338S00942 power IC is listed for the iPhone 14, iPhone 14 Pro and iPhone 14 Pro Max.
Can a faulty 338S00942 cause a dead phone?
It can. Unexpected shutdowns, overheating and failure to power on are linked to this chip, but battery, charging port and short-circuit faults produce the same symptoms, so test the board before replacing the IC.