338S00946-B0 iPhone 15 Charging IC Replacement
₨ 1,200
338S00946-B0 Charging IC for iPhone 15 Series Boards
The 338S00946-B0 is a USB charging power management IC listed for the iPhone 15 series. It controls how the board takes in power and distributes it, so a fault here often shows up as a charging issue, a phone that will not power on, or a unit that shuts down under load. Technicians who suspect this IC should check the donor and target board part numbers before ordering. Use this chip when your diagnostics point to the charging path and your bench confirms the rest of the power chain is healthy.
Where the 338S00946-B0 Fits in Your Power Repair Workflow
The 338S00946-B0 sits in the USB charging path of the iPhone 15 series. Distributor listings place it among the power management ICs that manage input power, charge regulation, and power distribution on the logic board. When your bench shows a dead phone that accepts a charger but never starts charging, or a unit that drops out on cable movement, this chip belongs on your list of suspects. Treat it as a candidate, not a verdict. Confirm it before you commit to a replacement.
Diagnosing a Charging Fault Before You Lift the IC
Start with the input side. Check the charging connector, the flex, and the charging port solder joints under the microscope. Measure the voltage at the input rails with the phone powered by a bench supply and a current limit set low enough to protect the board. If the input rail is present but the battery does not respond, the fault may sit downstream of the charging path. A short on a rail can also mimic a dead IC, so use your thermal camera to find the hot component before you desolder anything.
Removing and Installing the Charging IC Safely
Use a hot air station with a low, steady airflow and preheat the board evenly. Keep the nozzle at a consistent distance and watch the surrounding passive components, because nearby parts lift quickly when the board heats unevenly. Clean the pads with flux and wick before placement. Align the new 338S00946-B0 carefully against the pad outline and reflow it with the correct profile for your solder type. Lead-free joints need more heat and more time than leaded ones, so check each side with your microscope before you power up.
Testing the Board After Replacement
Power the board through your bench supply first, not the battery. Watch the current draw during the first few seconds. A stable, modest draw suggests the new IC is not shorted. Then connect a known good battery and test charging with a verified cable. Confirm that the phone charges, reports the correct battery status, and holds charge under load. If the phone shows a hang on logo or a boot loop after the IC change, check the surrounding power rails and the software state before blaming the new chip.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Identified as a USB charging power management IC for iPhone 15 series boards
- ✓Supports replacement work on the charging path of the logic board
- ✓Suited to board-level repair with a hot air station and microscope
- ✓Fits a diagnostic workflow that starts with input rail checks
Specifications
| Model | 338S00946-B0 |
|---|---|
| Category | Mobile Phone ICs |
Common Repair Uses
- ✓Repairing a charging issue where the phone accepts a cable but does not charge
- ✓Fixing a dead phone that shows no power response after a board-level fault in the charging path
- ✓Replacing a shorted or heat-damaged charging IC identified with a thermal camera
- ✓Restoring power stability on boards that shut down under load after a power fault
Compatible Devices
- ✓iPhone 15 series charging boards (per distributor listings, verify against donor board)
- ✓Compatible Devices:
- ✓iPhone 15
- ✓iPhone 15 Plus
- ✓iPhone 15 Pro
- ✓iPhone 15 Pro Max
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the 338S00946-B0 used on the iPhone 15 Pro Max only?
Does the 338S00946-B0 need a hot air station for replacement?
Related products
358S IC T211 Samsung Tab Charging IC – Tab 3 USB Charger IC
In stock



