Gtoolspro iWatch Screen Repair & Fitting Set S1-S7

₨ 8,000

Gtoolspro iWatch Screen Repair Kit for Apple Watch S1-S7

The Gtoolspro iWatch Screen Repair & Fitting Set covers three stages of an Apple Watch screen job in one kit: glass separation, screen alignment, and OCA lamination. It combines a multi-size positioning mold, a dedicated separation mold, separator mats, a cutting wire, and lamination sponge mats. The positioning mold accommodates 38mm, 40mm, 42mm, and 44mm cases, so you do not need a separate fixture for each watch size. The tooling holds the watch body steady during separation and keeps the replacement display flush during bonding. It pairs with a laminating machine and UV curing lamp for a finished bond.

In stock

10 People watching this product now!
Description

Gtoolspro iWatch Screen Repair & Fitting Set for Apple Watch Screen Replacement

Apple Watch screen replacement is less forgiving than phone glass work. Case dimensions change between generations, and the display sits close to the frame with little margin for error. The Gtoolspro iWatch Screen Repair & Fitting Set addresses this with matched tooling for the Apple Watch screen repair kit workflow: separate, align, laminate. Each component targets one stage, so your bench keeps a single consistent setup from glass removal through OCA bonding. The set is listed for Apple Watch Series 1 through Series 7.

Positioning Mold and Alignment

The multi-size positioning mold locks the watch body in place while the new screen is aligned. Holding the display flush against the frame before lamination prevents the drift that causes uneven gaps and pressure lines on a finished repair. The mold covers 38mm, 40mm, 42mm, and 44mm cases, so one fixture serves the full size range in the kit. Confirm your watch size before placing the body, because a mismatched cavity leaves the display off-axis. Re-check alignment before you apply the adhesive layer.

Separation Mold, Cutting Wire, and Separator Mats

The dedicated separation mold gives the case a stable base during glass removal. Separator mats sit between the case and the tooling to prevent scratches on the aluminum or stainless steel body. The cutting wire cuts through the adhesive layer so the old glass lifts away with less stress on the digitizer underneath. Work the wire slowly along the edge, because forcing it through a tight Series 4 to Series 7 frame increases the chance of cracking the display. Clean the frame fully before you move to alignment.

Lamination Sponge Mats and OCA Bonding

Lamination sponge mats sit beneath the watch during OCA bonding and spread pressure across the curved surface. Even pressure reduces the point loading that causes bubbles or screen lift after the repair leaves the bench. This set handles the mechanical side only. A finished OCA bond still requires a laminating machine and UV curing step, so plan your station with both. Technicians who already run phone lamination will find the principle identical: steady part, even pressure, controlled cure.

Additional information
Weight1.2 kg
Q & A
Please login to post questions

Key Features

  • Multi-size positioning mold for 38mm, 40mm, 42mm, and 44mm cases
  • Dedicated separation mold holds the case steady during glass removal
  • Separator mats protect the watch body from scratches
  • Cutting wire for controlled glass-to-digitizer separation
  • Lamination sponge mats distribute pressure during OCA bonding
  • Single kit covers separation, alignment, and lamination stages
  • Listed for Apple Watch Series 1 through Series 7
  • Reduces the need to source separate tools per watch generation

Specifications

BrandGtoolspro
CategoryWatch Repair Tools
CompatibilityApple Watch Series 1–7
Case Sizes38mm, 40mm, 42mm, 44mm
Package ContentsPositioning mold, separation mold, separator mats, cutting wire, lamination sponge mats

Common Repair Uses

  • Apple Watch screen glass removal and separation
  • Display alignment before OCA bonding
  • Lamination pressure positioning for watch screens
  • Case protection during screen refitting
  • Multi-size alignment at a single repair station

Compatible Devices

  • Apple Watch Series 1–7 (38mm, 40mm, 42mm, 44mm case sizes)
  • Apple Watch Series 1–7, 38mm case
  • Apple Watch Series 1–7, 40mm case
  • Apple Watch Series 1–7, 42mm case
  • Apple Watch Series 1–7, 44mm case

FAQ

What is the product name? The product name is Gtoolspro iWatch Screen Repair & Fitting Set S1-S7.
What is the brand of this product? The brand of this product is Gtoolspro.
What is the model of this product? The model of this product is iWatch Screen Repair & Fitting Set S1-S7.
What is this product used for? This product is used for separating, aligning, and laminating Apple Watch screens during glass replacement.
Which devices are compatible with this product? This product is compatible with Apple Watch Series 1 through Series 7 in 38mm, 40mm, 42mm, and 44mm case sizes.
Who should use this product? This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this kit cover all Apple Watch case sizes from Series 1 to Series 7? The positioning mold is listed for 38mm, 40mm, and 42mm, and 44mm cases across Series 1 through Series 7.
Is a laminating machine needed to complete an OCA bond with this set? Yes. The mold and separator components handle alignment and separation, but a finished bond needs a laminating machine and UV curing step.