2UUL SC03 TubeMate Flux Syringe Dispenser

₨ 1

2UUL SC03 TubeMate Flux Syringe Dispenser for Controlled Dosing

The 2UUL SC03 TubeMate is a dispenser built for working with flux tubes on the repair bench. It fits standard 10cc syringes and handles flux, solder paste and UV glue, giving you steady pressure without squeezing by hand. The uniform squeezing system is designed to help you recover more product from each syringe, which the manufacturer rates at up to 20 percent. This two-piece set gives you one dispenser per material, so flux and paste stay separate. The green finish helps you tell the two dispensers apart at a glance. Use it for millimetric flux dosing during fine micro-soldering work.

Out of stock

16 People watching this product now!
Description

2UUL SC03 TubeMate Flux Syringe Dispenser for Precise Micro-Soldering

The 2UUL SC03 TubeMate flux syringe dispenser solves a simple problem on the bench: pushing thick material out of a syringe by hand gives uneven flow, wastes product, and tires your fingers during long sessions. This two-piece pack attaches to standard 10cc syringes and applies steady, controlled pressure so each drop lands exactly where you need it. Whether you dose board-level flux, place solder paste, or dispense UV glue, the TubeMate keeps your output consistent from the first press to the last. Technicians who work on fine joints around ICs, connectors, and BGA pads usually notice the difference within a few repairs. The tool itself is simple, but it changes how much material you consume and how clean each joint looks on the board. Repair shops that handle high volume will see the value quickly. Below, you will find where it fits in the soldering workflow, how to set it up, and how to get more from every syringe.

Where the TubeMate Fits in Your Soldering Workflow

Flux goes down before most board-level repairs, whether you are reflowing a component, cleaning a bridged pin, or preparing a pad for tinning. Syringe flux beats an open pot and a brush because you place a small, measured amount exactly where the joint needs it. The TubeMate sits between the syringe and your hand, converting steady pressure into controlled dosing. That keeps your workflow moving when you work through a motherboard section over a long shift. Tiny changes in dosing often decide whether a joint looks clean or bridges, and a technician who treats each drop as a deliberate step tends to produce cleaner joints with less cleanup later. Keep flux and paste in separate dispensers so you never cross-contaminate materials on your bench. Pair the tool with a good microscope and a clean soldering station, and each step becomes easier to repeat.

Setting Up the Dispenser on a Standard 10cc Syringe

Start by checking the syringe size, since the TubeMate is designed for standard 10cc syringes. Confirm your flux or paste tube matches that size before you attach the dispenser, so the fit stays secure during use. Load the material, seal the cap, and seat the dispenser firmly onto the plunger. Setup takes less than a minute once you get the rhythm. Press slowly for the first few drops to clear trapped air and check the flow. Avoid short, hard squeezes, because they push material unevenly and waste product. After each session, wipe off residue, because dried flux builds up quickly on the tip and plunger area.

Getting More Product from Every Syringe

The manufacturer describes a uniform squeezing system that helps you recover up to 20 percent extra product from each syringe. You get the most value by pressing evenly rather than in sudden bursts, so material moves toward the tip instead of sticking inside the barrel. Flux and UV glue both respond well to this steady approach, and solder paste stays more predictable when pressure stays constant. On a repair shop bench where you open many tubes each week, that saving adds up fast. For a service center running several technicians, a pair of dispensers means flux and paste never compete for the same tool. Track how many repairs each tube supports before reordering, and you will see whether your technique is improving. Cap the tip between sessions to slow drying and keep the material usable longer.

Additional information
Weight0.20 kg
Q & A
Please login to post questions

Key Features

  • Designed for standard 10cc syringes
  • Dispenses flux, solder paste and UV glue
  • Uniform squeezing system for steady pressure
  • Manufacturer rates recovery at up to 20 percent extra product
  • Two green dispensers in one pack, one per material
  • Supports precise millimetric flux dosing in micro-soldering
  • Reduces hand effort during long repair sessions
  • Two pieces per pack

Specifications

Brand2UUL
ModelSC03 TubeMate
CompatibilityStandard 10cc syringes

Common Repair Uses

  • Verified workflows where syringe flux, solder paste, and UV glue are dispensed on the bench.
  • Board-level flux application before reflow
  • Cleaning bridged pins on IC and connector pads
  • Pre-tinning pads before component placement
  • Millimetric flux dosing in micro-soldering
  • Solder paste dispensing for fine-pitch joints
  • UV glue dispensing for bonding repairs
  • Flux touch-ups during motherboard section repairs
  • Consistent flux dispensing during high-volume service bench work

Compatible Devices

  • Universal, not device-specific. The compatibility scope is syringe size, not phone model.
  • Standard 10cc flux syringes
  • Standard 10cc solder paste syringes
  • Standard 10cc UV glue syringes
  • Flux tubes sold in 10cc syringe format
  • Solder paste tubes sold in 10cc syringe format
  • UV adhesive syringes in 10cc format
  • Two-piece set for separate material handling
  • Universal fit for any standard 10cc syringe barrel

FAQ

What is the product name?
The product name is 2UUL SC03 TubeMate Flux Syringe Dispenser.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC03 TubeMate.
What is this product used for?
This product is used for dispensing flux, solder paste, and UV glue from standard syringes during repair work.
Which devices are compatible with this product?
This product is compatible with standard 10cc syringes.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the TubeMate fit standard 10cc flux syringes?
Yes. The TubeMate is designed for standard 10cc syringes, so confirm your tube matches that size before use.
Can one pack handle both flux and solder paste?
Yes. The two-piece set lets you keep flux and solder paste dispensers separate on your bench.