Mechanic 004M B1 Microscope Base Silicone Maintenance Pad

₨ 1,500

B1 Microscope Base Silicone Pad for Motherboard Repair Benches

This silicone maintenance pad installs on a B1 microscope base without removing the microscope. You keep your microscope in position while you work on a motherboard, so the bench stays organized. The silicone resists heat up to 500°C, which protects the surface beneath during soldering and rework. A built-in screwdriver magnetizer keeps your driver tips magnetized for screw removal. Storage slots hold chips, small parts and tools in one zone. Use it as the base layer for IC removal, reballing and board-level diagnostics.

Out of stock

18 People watching this product now!
Description

B1 Microscope Base Silicone Pad for Board-Level Repair Work

Your B1 microscope base silicone pad does more than protect the bench. It turns the area under your microscope into a working zone for board-level repair. When you handle a motherboard under magnification, every component, screw and tool needs a fixed position. This pad provides that structure while keeping your microscope in its normal setup. The following sections explain how the pad fits your bench, how its heat resistance helps, and where it fits in a typical repair workflow.

Fitting Directly on Your B1 Microscope Base

The pad is designed for B1 microscope bases and goes on without disassembling the microscope. You place it on the base and start working right away, which saves setup time on a busy bench. The surface sits flat, and the back carries round holes that create an anti-slip grip against the bench. Your board stays steady during fine work, and you avoid the small shifts that cause dropped parts. Since the pad installs on the existing base, you do not need a separate microscope stand. Check your base model before you buy, because the RL-004M targets B1 bases while the RL-004I version is made for B3 bases.

Heat Resistance for Soldering and Rework

Soldering and hot air work generate heat that can damage a plain bench surface over time. The silicone in this pad tolerates temperatures up to 500°C, so it handles routine iron tips and preheater residue without warping. You can rest a soldering iron near a board during IC removal and keep the work area clean. The surface is made of environmentally friendly silicone, which keeps the bench layer stable across long sessions. When you run BGA work or PCB rework, this heat tolerance gives you a dependable base layer under the motherboard. Keep hot tools on the pad rather than directly on the bench, and let them cool before you clear the area.

Magnetizer and Storage Layout for Tools

Every technician knows the frustration of a lost screw. This pad includes a built-in screwdriver magnetizer, which magnetizes your driver tips so they hold screws during removal. You also get designated compartments and grooves for tools and small components. Keep chips, screws and spare parts in their own zones, and the bench stays readable at a glance. This layout matters most during disassembly, when screw count and placement affect the reassembly. A clear layout also speeds up your workflow when you switch between tasks. Place tweezers, picks and small parts in the storage areas before you begin, not after the work is underway.

Where This Pad Fits in Your Repair Workflow

This pad serves the preparation and workspace stages of a repair. You use it during disassembly, when you lift shield cans and remove screws. It supports soldering and rework when the board sits under the microscope for IC work. It also works as the base layer for reballing and component replacement, because the surface protects the board while you work on fine pads. Pair it with a hot air station and a soldering station for a complete bench setup. Use a reliable magnifier and a tool organizer alongside it for the full workflow. The pad does not replace a magnifier or a station. It creates a dependable, organized space that supports them.

Additional information
Weight0.9 kg
Q & A
Please login to post questions

Key Features

  • Fits B1 microscope bases without disassembly
  • Silicone resists heat up to 500°C
  • Built-in screwdriver magnetizer
  • Storage slots for tools and small components
  • Anti-slip round holes on the back
  • Dimensions of 260 mm × 205 mm
  • Environmentally friendly silicone material

Specifications

ModelRL-004M
CategoryMicroscope Accessories
CompatibilityB1 microscope bases
TechnologySilicone maintenance pad with built-in screwdriver magnetizer
MaterialSilicone
Dimensions260 mm × 205 mm

Common Repair Uses

  • Motherboard disassembly and screw removal under the microscope
  • IC removal and replacement on the microscope bench
  • BGA reballing and PCB rework work area
  • Protecting the workbench from heat during soldering
  • Organizing chips, screws and small parts during repair

Compatible Devices

  • B1 microscope bases (verified compatibility scope; the RL-004I is the B3 version)
  • Mobile phone motherboards during soldering and component work

FAQ

What is the product name?
The product name is Mechanic 004M B1 Microscope Base Silicone Maintenance Pad.
What is the model of this product?
The model of this product is RL-004M.
What is this product used for?
This product protects and organizes your bench during motherboard disassembly, soldering and IC work under a microscope.
Which devices are compatible with this product?
This product is compatible with B1 microscope bases.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does this pad fit B3 microscope bases?
The RL-004M is designed for B1 microscope bases. The RL-004I is the matching version for B3 bases.
What is the maximum heat resistance of this pad?
The silicone surface resists temperatures up to 500°C.