2UUL SA14PM Screen Sealing Adhesive for iP14 Pro Max
₨ 900
iPhone 14 Pro Max Pre-Cut Sealing Adhesive
The 2UUL SA14PM Screen Sealing Adhesive for iP14 Pro Max (5pcsPack) gives your bench five pre-cut, double-sided seals made for iPhone 14 Pro Max display repairs. Each seal bonds the replacement screen to the frame during heat-press assembly, so you skip hand-trimming tape and keep the bond line consistent from job to job. You clean the frame, apply the seal, seat the display, and press it with a heating press such as the 2UUL DA07 Mini Hot Press Station. Mechanicpk supplies this iPhone 14 Pro Max screen sealing adhesive to repair shops and service centers that handle high-volume screen replacement and want a reliable reseal after every display job.
In stock
iPhone 14 Pro Max Screen Sealing Adhesive for Professional Display Resealing
The 2UUL SA14PM Screen Sealing Adhesive for iP14 Pro Max (5pcsPack) is a pre-cut, double-sided iPhone 14 Pro Max screen sealing adhesive that bonds a replacement display to the housing during heat-press assembly. Each pack gives your bench five frame-shaped seals, so you reseal five screens without trimming tape by hand. Mechanicpk supplies the SA14PM to repair shops and service centers that run iPhone 14 Pro Max display jobs and want a repeatable bond line. The seal looks like a minor consumable, yet it decides whether the finished phone keeps dust out and sits flush in the frame.
Where the SA14PM Fits in the Display Repair Workflow
A display replacement starts with heat and a pry tool, usually a hot air station or a separation machine, and ends with the new panel pressed back into the frame. The sealing adhesive belongs to that final stage. You clear the old adhesive residue from the frame, inspect the frame for deformation, lay the SA14PM seal along the perimeter, seat the screen, and apply heat and pressure. 2UUL names its DA07 Mini Hot Press Station for this step, and any other heating press that gives even contact also works. The pre-cut outline follows the iPhone 14 Pro Max frame, so you skip measuring, cutting, and re-aligning strips. A microscope helps you check the frame edge for leftover glue before you apply the new seal, and a PCB holder keeps the phone steady while you work around the housing. A clean, undeformed frame matters, because a bent edge or old glue leaves gaps that no new adhesive closes.
Technical Notes on the Adhesive and Pack
The SA14PM belongs to the 2UUL SA series, a range of pre-cut, double-sided screen sealing adhesives for iPhone 12 through 17 models, with one part code per model. The 14PM code targets the iPhone 14 Pro Max only. Model numbers A2651, A2893, A2894, A2895, and A2896 all belong to that phone. Other iPhone sizes need their own SA-series part, because the frame outline changes with every model. 2UUL presents heat pressing as the method that restores airtightness at the screen bezel. Treat the result as a proper reseal after repair, and avoid promising customers a factory water-resistance rating, since a repaired phone no longer carries its original factory seal. Each pack holds five pieces, and each piece seals one repair, so one pack covers five jobs.
Buying Notes for Repair Shops and Service Centers
Shops with steady iPhone traffic use adhesive on every display job, so a five-piece pack of one exact model keeps your iPhone 14 Pro Max stock predictable. A phone that arrives with a display problem often brings a second fault with it, such as a charging issue, a worn battery, or a hardware fault on the board. Those jobs call for multimeters, test boxes, soldering stations, hot air stations, and reballing kits from the same Mechanicpk catalog. Add this adhesive to those orders and you close every iPhone 14 Pro Max reassembly with a seal cut for that exact phone. Pair it with the DA07 press or another heating press, and the reseal step becomes a repeatable routine on your repair bench instead of a guess.
| Weight | 0.100 kg |
|---|
Key Features
- ✓Pre-cut for the iPhone 14 Pro Max, so no hand trimming
- ✓Double-sided adhesive for a firm screen-to-frame bond
- ✓Made for heat-press application
- ✓Works with the 2UUL DA07 Mini Hot Press Station or another heating press
- ✓Helps restore airtightness at the screen bezel after repair
- ✓Five pieces per pack for five repairs
- ✓Part of the 2UUL SA series for iPhone 12 to 17 models
- ✓Suits repair shops, service centers, and professional technicians
Specifications
| Brand | 2UUL |
|---|---|
| Model | SA14PM |
| Category | Screen Sealing Adhesive |
| Compatibility | Apple iPhone 14 Pro Max |
| Supported Devices | iPhone 14 Pro Max |
| Technology | Pre-cut double-sided adhesive, heat-press application |
| Pack Quantity | 5 pieces |
Common Repair Uses
- ✓Front screen resealing during iPhone 14 Pro Max display repair
- ✓Display replacement on the iPhone 14 Pro Max
- ✓Reapplying the screen seal after LCD or frame repair
- ✓Bonding a replacement screen to the frame with a heating press
- ✓Restoring airtightness at the screen bezel after repair
- ✓Replacing the screen seal after battery or board-level work that needs the display removed
- ✓Resealing five phones from one pack in a repair shop
Compatible Devices
- ✓Verified compatibility scope: Apple iPhone 14 Pro Max (model-specific, not universal)
- ✓iPhone 14 Pro Max (A2651)
- ✓iPhone 14 Pro Max (A2893)
- ✓iPhone 14 Pro Max (A2894)
- ✓iPhone 14 Pro Max (A2895)
- ✓iPhone 14 Pro Max (A2896)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can I use the SA14PM on other iPhone 14 models?
Which press do I need to install the 2UUL SA14PM screen sealing adhesive?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



