Koocu E8000 White Gum 50ML Mobile Repair Adhesive
₨ 1
Koocu E8000 50ML Repair Adhesive
Koocu E8000 White Gum comes in a 50ML tube and bonds phone touch panels, LCD frames, and back panels with a flexible, clear-drying joint. This single-component adhesive cures at room temperature, so you skip mixing and skip a curing lamp. A medium-viscosity flow gives you a controlled bead along frame channels, and the cured bond resists water. Repair shops and service centers use it to reseal a display after a repair, to hold loose bezels, and to bond general electronics parts. Full strength builds over 24 to 48 hours. Mechanicpk supplies it to technicians across Pakistan.
Out of stock
Koocu E8000 Adhesive for Mobile Repair: 50ML Clear Bonding Gum
Koocu E8000 adhesive for mobile repair gives you a single-component, room-temperature-curing gum in a 50ML tube, sized for a workshop that reseals display frames and back panels every day. Mechanicpk stocks it under the Koocu brand as a clear-drying adhesive for touch panel, LCD frame, and general electronics bonding. You squeeze it straight from the tube, spread it along the bonding edge, and press the parts together without mixing or a curing lamp.
What the E8000 formulation gives your bench
E8000 belongs to the multi-purpose E-series adhesive family that technicians use where tape alone does not hold a frame. It cures into a soft, flexible bond instead of a brittle one, so a phone frame that flexes under thumb pressure does not crack the glue line. The cured gum resists water and dries transparent, which matters when the bond line sits close to a visible edge. Its medium viscosity lets you lay a controlled bead along a frame channel without the gum creeping into the display cavity. The 50ML tube covers a large number of frame and back panel jobs before you reorder.
Where it fits in the repair workflow
Adhesive work closes the repair chain. You finish the board-level fix first, whether that means IC change karna, jumper lagana, or a charging port replacement. Then you test display response and touch behaviour, and only then you bond the frame. Koocu E8000 fits that last stage. It reseals a touch panel or LCD frame after a display problem repair and holds a loose back panel or plastic bezel in position. Pair it with a hot air station to soften old adhesive during separation, a microscope to inspect the glue line on fine edges, and PCB holders to keep the assembly steady while the gum sets. Reballing kits and multimeters stay on the board side of the job, while the adhesive finishes the housing side.
Application and curing practice
Clean both surfaces of old adhesive, dust, and oil before you apply anything. Spread a thin, even layer along the bonding edge, wait about three to five minutes, then press the two parts together firmly. Surface dry arrives within minutes, while full curing takes 24 to 48 hours, so avoid heavy handling during that window. Heat from a hot air station softens the cured bond, which lets you separate the parts without damage in your next repair. Close the cap tightly after each use because air hardens the gum in the nozzle. Store the tube in a cool, dry place away from direct sunlight, and work in a ventilated area.
Mechanicpk supplies Koocu E8000 adhesive for mobile repair to repair shops, service centers, and technicians across Pakistan who want a dependable frame and touch panel adhesive in a workshop-sized tube. Browse the Hot Air Stations, Microscopes, and PCB Holders categories to build the full bench around it.
| Weight | 0.1 kg |
|---|
Key Features
- ✓50ML tube sized for high-volume workshop use
- ✓Single-component formula with no mixing
- ✓Cures at room temperature without a lamp
- ✓Dries clear, so the bond line stays discreet
- ✓Flexible cured bond that tolerates frame flex
- ✓Waterproof cured joint
- ✓Medium-viscosity flow for controlled bead placement
- ✓Heat from a hot air station softens the bond for later separation
Specifications
| Brand | Koocu |
|---|---|
| Model | E8000 |
| Category | Adhesives & Glue |
| Compatibility | Universal — not device-specific |
| Technology | Single-component adhesive, cures at room temperature |
| Net Content | 50ML |
| Full Curing Time | 24–48 hours |
Common Repair Uses
- ✓Frame, touch panel, and housing bonding at the final stage of a repair
- ✓Resealing an LCD frame after display problem repair
- ✓Bonding a touch panel to its frame
- ✓Refixing a loose back panel or cover
- ✓Securing plastic bezels and housing edges
- ✓Bonding tablet display frames
- ✓Fixing loose electronic component housings
- ✓Repairing accessory and earphone casings
- ✓Gluing glass or metal parts during rework
Compatible Devices
- ✓Universal — not device-specific; bonds phone, tablet, and electronics housing parts
- ✓Smartphone touch panel and LCD frames
- ✓Smartphone back panels and covers
- ✓Plastic bezels and housing frames
- ✓Tablet display frames
- ✓Glass and metal phone parts
- ✓Electronic component housings
- ✓Earphone and accessory casings
- ✓Phone case DIY and craft bonding



