Koocu 2602 2in1 BGA IC Solder Kit with 138°C Flux Paste
₨ 1
2in1 BGA IC Solder Kit
The Koocu 2602 BGA IC solder kit gives your bench a 138°C low-temperature flux paste and a companion solder paste in one 2in1 set. The paste combines alloyed powder with resin pasty flux and ships with a needle tip, so you dispense small, controlled amounts onto fine pads. You use it for soldering and reballing of phone and computer chips, and for PCB, BGA and PGA rework. The low melting point suits temperature-sensitive boards, which makes it a practical consumable for IC-level mobile repair in Pakistan.
Out of stock
Koocu 2602 BGA IC Solder Kit for Low-Temperature Rework
The Koocu 2602 BGA IC solder kit pairs a 138°C low-temperature flux paste with a companion solder paste in one 2in1 set. You cover chip reballing and board-level rework from a single kit. Mechanicpk supplies it to Pakistani repair benches that handle BGA packages, PGA packages and phone motherboard ICs daily. The paste combines alloyed powder with a resin pasty flux, and the included needle tip lets you place paste exactly where a joint needs it. For shop owners and service centres, the kit gives you a consistent soldering consumable for every IC job.
Where 138°C Flux Paste Fits in the Rework Process
A 138°C melting point sits well below standard medium-temperature pastes, so you reflow with less thermal load on the board. That matters on mobile motherboards, where neighbouring components and board layers suffer from prolonged heat. When you plan an IC change karna job on a dead phone, a low-temperature paste lets you reseat the chip at a gentler reflow setting. The kit supports the soldering and reballing stages of that workflow: you tin the pads, place the chip, and reflow with your hot air station. The same paste serves phone chips and computer chips, because the formulation targets PCB, BGA and PGA rework rather than a single device family.
Material and Joint Behaviour
Alloyed powder mixed into a resin pasty flux forms the body of this paste, and the formulation avoids the pale yellow residue that weaker fluxes leave on a board. The white paste stays easy to spot against dark solder mask, so you check coverage before you apply heat. Good immersion and a high-strength joint are the performance targets for this kit. You reach both by applying a thin, even layer through the needle tip and holding a steady reflow temperature, instead of loading a pad with excess paste. Clean application also reduces the rework you face after a hang on logo or charging issue repair, where a poor joint sends the phone straight back to your bench.
Pairing the Kit with Your Bench Setup
Low-temperature paste performs best when the rest of your station gives you precise heat control. Match the kit with one of our Hot Air Stations or Soldering Stations for stable temperature, and place the board in a PCB Holder so the chip stays level during reflow. A Microscope helps you inspect fine pads before and after soldering, and a Multimeter confirms continuity once the joint cools. If you reball regularly, add a Reballing Kit with stencils, and keep ISP Pinout Tools, eMMC Programmers and UFS Adapters nearby for the flashing and testing stage that follows a chip replacement. Step up to more advanced rework equipment as your workload grows, and keep this paste as the dependable consumable for every reflow.
| Weight | 0.15 kg |
|---|
Key Features
- ✓2in1 kit combining flux paste and solder paste
- ✓138°C low-temperature flux paste
- ✓Alloyed powder in resin pasty flux
- ✓Avoids pale yellow residue
- ✓White paste colour
- ✓Needle tip included for controlled dispensing
- ✓Good immersion and high-strength joint
- ✓Suits PCB, BGA and PGA rework
Specifications
| Brand | Koocu |
|---|---|
| Model | 2602 |
| Category | Flux Paste / BGA IC Solder Kit |
| Compatibility | PCB, BGA and PGA rework (universal, not device-specific) |
| Technology | 2in1 kit with 138°C low-temperature flux paste (5cc) and solder paste (25g), needle tip included |
| Material | Alloyed powder with resin pasty flux (white colour) |
Common Repair Uses
- ✓Soldering and reballing of computer and phone chips, plus general PCB, BGA and PGA rework
- ✓BGA chip reballing
- ✓Phone chip soldering
- ✓Computer chip soldering
- ✓PCB rework
- ✓PGA component rework
- ✓Low-temperature soldering on temperature-sensitive boards
- ✓Pad tinning before chip placement
- ✓Reflow during IC replacement
Compatible Devices
- ✓Universal low-temperature rework consumable, not tied to a single phone brand; suited to phone and computer chip soldering and reballing
- ✓Mobile phone motherboard ICs
- ✓BGA-package chips
- ✓PGA-package components
- ✓CSP-package components
- ✓Computer chips
- ✓PCB rework points



