KATEX T8000 Glue 110ml White – Mobile Repair Adhesive
₨ 1
KATEX T8000 Glue 110ml
The KATEX T8000 glue 110ml for mobile repair is a white, liquid multi-purpose adhesive for bonding LCD screens, middle frames and brackets. The 110ml bottle gives a busy repair bench enough volume for repeated display refitting jobs, so you reorder less often than with 15ml or 50ml pens. The formulation bonds metal, glass, plastic, ABS, rubber and electronic components, which covers the surfaces you meet most in screen and frame work. Mechanicpk supplies it to technicians, repair shops and service centers across Pakistan.
Out of stock
T8000 Glue 110ml for Mobile Repair Bonding
The KATEX T8000 glue 110ml for mobile repair is a liquid multi-purpose adhesive that bonds LCD screens, middle frames and brackets during display refitting. KATEX supplies it in white, in a 110ml bottle that suits shops handling several screen jobs a day. The T8000 formulation belongs to a family of frame-bonding adhesives that suppliers sell in 15ml, 50ml and 110ml sizes, and the 110ml bottle gives you the most adhesive per purchase. Technicians who handle display problem jobs every day reach for this size first, because a half-empty pen in the middle of a job stalls the whole bench.
Where T8000 Fits in the Display Refitting Workflow
A typical display job starts with heat. You warm the panel on a hot air station, separate the LCD from the frame, and clear the old residue off the middle frame under a microscope. Once the frame sits clean and dry, T8000 takes over. You run a thin line of adhesive along the gap between the LCD and the frame or bracket, set the screen, and press it down firmly. The glue closes the lifting edge that causes a loose display after repair, and it holds the bracket in position while you move on to testing.
Diagnosis comes before bonding. Check the board with a multimeter and a test box first, so you confirm the hardware fault is fixed before you seal the screen in place. A dead phone that returns because the display lifted costs you a repeat visit, and a properly bonded frame avoids that.
Materials the T8000 Formulation Bonds
Supplier documentation lists T8000 for a broad range of materials: metal, glass, ceramics, plastic, ABS, PVC, nylon, rubber, leather, fabric and bare electronic components. In phone repair, that range covers the surfaces you meet most often: metal middle frames, glass panels, plastic brackets and rubber trim. One bottle on your bench replaces several specialist glues, and you stop hunting for the right adhesive between jobs.
Run a small test on a scrap part or a spare frame before your first real job, as suppliers recommend. The test shows you the right grip and the right amount, so you never learn the correct quantity on a customer’s phone. Once you know the amount, the 110ml bottle delivers consistent results across hundreds of screen refits.
Bench Practice with the 110ml Bottle
Clean both surfaces before you apply the adhesive. Dust and old residue weaken the bond, so wipe the frame and keep your work area free of debris. Apply a small amount into the gap between the screen and the frame instead of flooding the joint, because excess adhesive squeezes out and creates cleanup work. Press firmly once you set the part, and hold the phone still while the bond takes hold.
Keep the glue away from the PCB side of the phone. A drop on an open IC, connector or flex pad turns a simple screen job into a board-level repair, so shield those areas with a PCB holder setup or tape before you work near them. Cap the bottle tightly after every use so the remaining volume stays usable for the next job.
The 110ml size suits shop owners and service centers that run a steady flow of display and frame repairs. Pair it with a hot air station for panel separation, a microscope for residue cleaning, and your existing soldering station and reballing kit for board-level work, and you cover the full path from teardown to final reassembly. Order KATEX T8000 from Mechanicpk to keep your frame-bonding stock ready for Pakistan’s busiest repair days.
| Weight | 0.1 kg |
|---|
Key Features
- ✓110ml large-volume bottle for high-throughput repair benches
- ✓White liquid adhesive formulation
- ✓Bonds metal, glass, ceramics, plastic, ABS, PVC and nylon
- ✓Bonds rubber, leather, fabric and electronic components
- ✓Suited to LCD screen, middle frame and bracket bonding
- ✓Thin-line application into the screen-to-frame gap
- ✓Works across brands and screen sizes, not device-specific
- ✓Suits repair shops, service centers and workshop stock
Specifications
| Brand | KATEX |
|---|---|
| Model | T8000 |
| Category | Mobile Repair Adhesives |
| Compatibility | Universal – not device-specific |
| Supported Devices | Universal – any phone or tablet frame, screen and bracket bonding job |
| Technology | Liquid multi-purpose adhesive, 110ml, white |
Common Repair Uses
- ✓Frame and screen bonding during display refitting and housing repair
- ✓Refitting an LCD to the frame after screen replacement
- ✓Securing a lifting screen edge
- ✓Bonding middle frame sections
- ✓Fixing loose brackets
- ✓Reattaching plastic housing pieces
- ✓Bonding glass panels to frames
- ✓Repairing loose metal frame joints
- ✓Securing small electronic components and trim parts
Compatible Devices
- ✓Universal adhesive – not tied to specific phone models, so it works across brands, chipset families and screen sizes
- ✓LCD screen to phone frame bonding (any brand)
- ✓Middle frame and bezel bonding
- ✓Internal bracket bonding
- ✓Tablet screen frame bonding
- ✓Plastic and ABS housing parts
- ✓Glass panel bonding
- ✓Metal frame bonding
- ✓Rubber trim and fabric components
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can T8000 glue bond an LCD screen to the phone frame?
Which materials does T8000 glue bond?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



