Mechanic AS-KING11 Stainless Steel Tweezer Straight Blue
₨ 1
Straight Precision Tweezer for Mobile Repair
The Mechanic AS-KING11 Stainless Steel Tweezer Straight Blue gives your repair bench a straight, fine pointed tool for handling small parts on mobile phone boards. Mechanic markets the AS-KING11 as a high toughness tweezer, and the stainless steel body suits daily rework sessions. You pick up SMD components, place jumper wires and hold small screws or flex connectors without crowding neighbouring parts. The blue finish lets you separate it from other tweezers on a busy workbench. Pair it with your hot air station, soldering station and microscope for controlled, IC-level repair on dead phone and charging issue jobs.
Out of stock
Mechanic AS-KING11 Straight Tweezer: Fine-Tip Control for Board-Level Repair
The Mechanic AS-KING11 straight tweezer, listed at Mechanicpk as the Mechanic AS-KING11 Stainless Steel Tweezer Straight Blue, gives you a fine pointed tip and a stainless steel body for the part of repair work that decides the result: holding tiny components steady. Every dead phone, charging issue or display problem that lands on your board-level bench involves small parts, thin wires and tight spacing. Mechanic markets the AS-KING11 as a high toughness tweezer, and the straight geometry matches the direct, top-down approach most technicians use on a phone motherboard. You order it as a single blue unit, so it slots into your rework kit without extra sorting, and you can stock several for a multi-technician workshop.
Straight Tip Geometry and Board Handling
A straight tweezer points along your line of sight, which keeps the tip visible when you work under a microscope. You approach an SMD capacitor, resistor or small IC from directly above and grip it without tilting your wrist into neighbouring parts. The fine pointed tip of the AS-KING11 narrows the contact area, so you pick up one component at a time even on a crowded mobile board. Hold the tweezer like a pen, rest your palm on the PCB holder or the bench edge, and let the tip handle the fine movement. That posture cuts slips during placement and keeps small parts from jumping off the board when you reposition them. You also use the same tip for small screws, thin gaskets and flex cable edges during teardown. Compared with a bent tip, a straight tip gives you a more predictable grip force, because the two arms close in a line you can see and control.
Where the AS-KING11 Fits in Your Repair Workflow
Board repair follows a sequence, and this tweezer works at several stages. During diagnostics, you move small parts aside and hold wires in place while you probe the board with a multimeter. During rework, you reposition an IC or press a part against its pads while your hot air station or soldering station heats the joint. After you clean the pads and reball a chip with your reballing kit, you set the part back down and check alignment under the microscope. When a dead phone needs ISP access, you press a thin jumper or ISP wire against a test point while you solder it. Each of those steps asks for one precise grip, and a straight, pointed tip delivers it. Workshops in Pakistan that handle high daily volumes of board-level jobs rely on this kind of everyday tool more than on any single machine. A tweezer that stays aligned and grips cleanly saves minutes on every job, and those minutes add up across a full shift of boot loop, hang on logo and charging issue repairs.
Building a Complete Tweezer-to-Station Toolset
Technicians who build a bench from the ground up usually start with a straight tweezer, then add a bent-tip tweezer for angled access, a soldering station for joint work and a microscope for inspection. That order gives you a clear upgrade path: start with hand tools, then move to stations and magnification as your repair volume grows. The blue finish of this unit helps you separate it from other tweezers in a shared workshop, which matters when several technicians use the same tool tray. Stainless steel construction gives you a body that resists rust in an environment where flux and cleaning liquids sit on the bench all day. Check the Specifications block below for the verified details, then browse the related PCB holders, multimeters, test boxes and hot air stations at Mechanicpk to complete the repair line around this tweezer.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Stainless steel body
- ✓Straight tip style
- ✓Fine pointed tips for small parts
- ✓Sold by Mechanic as a high toughness tweezer
- ✓Blue finish for easy identification on the bench
- ✓Suits SMD component pick-up and placement
- ✓Works with hot air stations, soldering stations and microscopes
- ✓Universal use across mobile phone brands
Specifications
| Brand | Mechanic |
|---|---|
| Model | AS-KING11 |
| Category | Precision Tweezers (Hand Tools) |
| Compatibility | Universal hand tool, not device-specific |
| Material | Stainless Steel |
| Tip Style | Straight, fine pointed |
| Color | Blue |
Common Repair Uses
- ✓Handling small parts during board-level mobile repair.
- ✓Picking up and placing SMD components (resistors, capacitors)
- ✓Holding an IC in position during hot air rework
- ✓Placing jumper wires for dead phone and charging issue repairs
- ✓Holding thin ISP wires against test points while soldering
- ✓Positioning ICs after reballing
- ✓Moving small parts aside during multimeter probing
- ✓Handling small screws and gaskets during teardown
- ✓Holding flex cable edges during display problem repairs
Compatible Devices
- ✓Universal hand tool, not device-specific. It works on mobile phone boards across brands.
- ✓Samsung mobile boards
- ✓Oppo mobile boards
- ✓Vivo mobile boards
- ✓Infinix mobile boards
- ✓Tecno mobile boards
- ✓Xiaomi mobile boards
- ✓Huawei mobile boards
- ✓iPhone series boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is the Mechanic AS-KING11 a straight or bent tip tweezer?
Can I use the AS-KING11 for SMD components and jumper wires on a mobile board?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock



