Qianli Bumblebee Stencil (QS70) MTK MT Power Series 1
₨ 799
Qianli QS70 MTK Power IC Stencil
The Qianli Bumblebee Stencil (QS70) MTK MT Power Series 1 gives your bench one reballing template for 18 MTK power IC part numbers, including MT6358W, MT6357CRV, MT6356W, MT6370P and MT6371P. Qianli designs it with square holes and rounded angles for BGA ball placement. You confirm the chip part number against the supported list, re-tin the removed IC, and move to reflow. Mechanicpk supplies the QS70 to technicians, service centers and training labs across Pakistan who need chip-level accuracy on MTK boards. The pack contains one stencil.
Out of stock
Qianli Bumblebee Stencil QS70 for MTK MT Power IC Reballing
The Qianli Bumblebee Stencil QS70 handles one job on the bench: reballing MTK MT power ICs after you lift them from the board. Mechanicpk supplies the Qianli Bumblebee Stencil (QS70) MTK MT Power Series 1 to Pakistani repair shops that see MediaTek-based phones daily and want a repeatable template instead of freehand ball placement. The stencil lists 18 power IC part numbers, from MT6261MA and MT6290MA up to MT6359VKP and MP6335WP, so a single piece covers a wide spread of MTK power management work. Qianli cuts square holes with rounded angles, the BGA pattern it uses across the Bumblebee range, and ships the QS70 as a single stencil.
Supported Power IC Part Numbers
Power ICs on MTK platforms generate and control the supply rails for the processor, memory, display, and charging circuit. When a joint cracks or a chip fails, you meet a dead phone, a charging issue, or a hang on logo case, and the repair often ends with a reballed or replaced power IC. The QS70 lists MT6371P, MT6370P, MT6360P, MT6359VKP, MT6358W, MT6357CRV, MT6356W, MT6355W, MT6353V, MT6337WP, MT6329, MT6325V, MT6322, MT6311DP, MT6303P, MT6290MA, MT6261MA, and MP6335WP. Match your target chip against that list before you order, because a stencil only works when its pattern fits the IC footprint. The listing names part numbers and does not name phone models, so you identify the power IC on your board first and then confirm it here.
Where the QS70 Fits in an MTK Repair Workflow
You start with a multimeter and a bench power supply to confirm a power fault, then lift the suspect IC with a hot air station and clean the pads with your soldering station and flux. A PCB holder keeps the board steady while a microscope shows you pad condition and any lifted tracks. The Qianli Bumblebee Stencil QS70 enters at the reballing step: you align it over the cleaned IC, apply solder paste or balls, heat the chip to form the balls, and lift the stencil away. You then inspect ball uniformity under the microscope, refit the IC, and test the board. Shops that also fix software-side faults keep the stencil next to their test box, ISP pinout tool, and eMMC programmer, because one dead phone can carry a hardware fault and a flashing fault together.
Preparation decides how clean the result looks. Remove old solder from the IC with flux and wick, wipe the surface with isopropyl alcohol, and check that no ball or pad is missing before you place the stencil. Keep the stencil flat against the chip and hold the board still while the solder melts. Let the IC cool before you lift the stencil, so you do not pull freshly formed balls off their pads. Repeat the visual check at the end.
Why Technicians Choose This MTK Power IC Stencil
Qianli’s listing describes this MTK power IC stencil as sturdy, precise, and durable over time, with an updated treatment and materials for easier, more accurate use. You place balls from a fixed pattern instead of by eye, which keeps results consistent from one board to the next. A repair shop owner gets one consumable that serves many MTK power parts, and a training institute gets a clear template for teaching BGA reballing basics. The model code QS70 also makes reordering simple, since you can name the exact stencil without guessing between neighboring codes in the Qianli range.
As a BGA reballing stencil for mobile repair in Pakistan, the QS70 suits the daily pattern of MTK phone repairs in busy workshops and service centers: high volume, tight margins, and little room for a failed reball. Buyers who source tools for a shop or a training lab can order several units and keep one at each bench instead of sharing a single stencil across technicians. Mechanicpk supplies the Qianli range alongside hot air stations, microscopes, and reballing kits, so you can build a complete BGA bench from one supplier. When your workload grows, add a reballing kit, fresh solder paste, and extra stencils to move from basic MTK reballing to full chip-level service.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Square holes with rounded angles for BGA ball placement
- ✓Lists 18 MTK MT power IC part numbers on one stencil
- ✓Chip-level coverage that does not tie you to one phone model
- ✓Described by Qianli as sturdy, precise, and durable over time
- ✓Updated treatment and materials, per Qianli’s listing
- ✓Clear QS70 model code for accurate reordering
- ✓Single-stencil pack that sits on any repair bench
- ✓Suits repair shops, service centers, and training labs
Specifications
| Brand | Qianli |
|---|---|
| Model | QS70 |
| Category | BGA Reballing Stencil (Bumblebee Series) |
| Compatibility | MTK MT power IC part numbers listed on the stencil (chip-level scope, not device-specific) |
| Technology | Square-hole, round-angle BGA stencil |
| Weight | 0.01 kg |
| Package | 1x Stencil |
Common Repair Uses
- ✓Reballing and re-tinning MTK power ICs on mobile phone boards
- ✓Reballing a removed MTK power IC before you refit it
- ✓Preparing a replacement power IC for installation
- ✓Re-tinning a power IC with lifted, damaged or missing balls
- ✓Rework on a dead phone where the power IC joints are suspect
- ✓Charging issue repairs that end with a power IC reball
- ✓Hardware fault diagnosis on MTK boards after a hang on logo or boot loop symptom
- ✓Batch reballing of several MTK power IC part numbers on one bench
- ✓BGA reballing practice in technical training labs
Compatible Devices
- ✓MTK (MediaTek) power IC part numbers, chip-level scope. The listing does not name phone models.
- ✓MT6371P and MT6370P
- ✓MT6360P and MT6359VKP
- ✓MT6358W and MT6357CRV
- ✓MT6356W and MT6355W
- ✓MT6353V and MT6337WP
- ✓MT6329 and MT6325V
- ✓MT6322 and MT6311DP
- ✓MT6303P, MT6290MA, MT6261MA and MP6335WP



