Back to products
RF4 3M50S Anti-Static Glue Removal Blades
RF4 3M50S Anti-Static Glue Removal Blades 6Pcs Original price was: ₨ 1,200.Current price is: ₨ 950.

Relife MC2 Multi-function Multimeter 4K Camera

₨ 32,500

Relife MC2 4K Multimeter Camera

The Relife MC2 Multi-function Multimeter 4K Camera pairs a 1/1.8-inch Sony IMX678 sensor with a pointed gold-plated multimeter probe, so you inspect a board and measure it on the same screen. It records 3840×2160 video at 30 fps, outputs through HDMI or Type-C, saves to a USB flash drive, and mounts on C-mount microscopes. You get 5x digital zoom, adaptive 4K/1080p HDMI output, and voltage, resistance, and continuity readings beside the live image. Mobile repair technicians and service centers use it to inspect PCBs, check solder joints, and diagnose hardware faults at the bench.

In stock

17 People watching this product now!
Description

Relife MC2 Multimeter 4K Camera for PCB Inspection and Live Measurement

The Relife MC2 Multi-function Multimeter 4K Camera combines a Sony IMX678 sensor and a probe-based multimeter in one bench unit. If you want a Relife MC2 multimeter 4K camera in Pakistan, the advantage is direct: you see the board magnified and read your measurement on that same screen, so your eyes stay on the pad you probe. The camera mounts on a C-mount microscope, outputs through HDMI or Type-C, and records to a USB flash drive. Repair shops that already run a microscope gain a measuring station without rearranging the bench.

Sony IMX678 Imaging Specifications

The MC2 uses a 1/1.8-inch Sony IMX678 sensor with 2.0μm pixels, and it captures 3840×2160 photos. You record video at 3840×2160 or 1920×1080, both at 30 fps. HDMI output switches between 4K and 1080p automatically to match your monitor, which keeps the picture stable when you move between a workshop display and a training-room TV. Over USB you get 1080p at 30 fps or 4K at 15 fps, so choose HDMI when you need smooth 4K. The sensor responds across a 400–1000nm spectral range, and 5x digital zoom lets you inspect a fine pad, a cracked capacitor, or a lifted trace without moving the microscope head. Timed and real-time snapshot modes handle documentation of each repair stage. On fine-pitch work, resistor and capacitor markings, solder bridges beside BGA pads, and flux residue stay readable, and a 4K frame holds more detail than a 1080p frame at the same field of view, so you crop a saved photo for a customer report or a repair log.

Multimeter Probe Measurement on the Live Image

The MC2 ships with a pointed, gold-plated stainless steel probe, 2mm in diameter and 22mm long. The tip reaches small electronic components that a standard multimeter lead blocks. The unit measures voltage, resistance, and continuity and shows the readings next to the live video. That layout changes how you diagnose a dead phone or a charging issue: you touch a capacitor pad, watch the probe land on the screen, and read the value without looking away or swapping tools. You avoid the common mistake of bridging two pads with a thick lead. Compare readings against a known-good board, then decide whether the fault sits in a component or in the line feeding it. Because the readout shares the screen with the image, you also record both in one clip. Save a video of a short-circuit check and you keep proof of the measurement for a customer or a trainee.

Connectivity, Storage, and Bench Setup

Output options include HDMI and Type-C, and the camera connects to a PC over USB for software viewing. Plug the camera into a monitor through HDMI and the image appears on your working screen and a second display at once, a feature Relife calls dual-screen synchronous display. Storage runs to a USB flash drive, so you save photos and video without a computer. The package includes the camera, an HDMI cable, a probe, a USB cable, a mouse, a USB adapter, and a user manual; the mouse needs AAA batteries that the package does not include. Power comes from a 5V/2A Type-C supply. The menu supports English, Chinese, Traditional Chinese, Russian, German, French, Japanese, and Italian. The C-mount interface fits industrial microscopes that use the standard camera port, so verify your microscope’s mount before you order.

Where It Fits in Your Repair Workflow

Place the MC2 at the diagnostic stage of your repair bench, between the first visual check and the rework. Before you commit a hot air station or a soldering station to a board, inspect the area for corrosion, lifted pads, and damaged ICs, then confirm with the probe. After rework, use the same view to check reballing results and solder joints before you close the phone. Technicians who run ISP pinout tools, eMMC programmers, or UFS adapters can check pad condition and wire placement under 4K before they connect anything. Test boxes handle the software side; the MC2 collects the hardware fault evidence. For a phone that charges slowly, a dead phone after a drop, or a display problem after a screen swap, the first job is finding the physical fault, and the MC2 shortens that job because magnification, measurement, and recording live in one device. If you use a basic multimeter today, this unit gives you an upgrade path toward a full microscope-based workstation, and a PCB holder keeps the board steady beneath the lens. Training institutes and shop owners also gain from HDMI output, because trainees watch the exact probe placement on a large display.

Additional information
Weight0.260 kg
Q & A
Please login to post questions

Key Features

  • 1/1.8-inch Sony IMX678 sensor with 2.0μm pixels
  • 3840×2160 photo capture and 4K/1080p video at 30 fps
  • Adaptive 4K/1080p HDMI output with dual-screen synchronous display
  • Integrated multimeter measuring voltage, resistance, and continuity
  • Pointed gold-plated stainless steel probe, 2mm diameter and 22mm length
  • C-mount interface for industrial microscopes
  • 5x digital zoom with timed and real-time snapshot modes
  • USB flash drive storage, PC support, and a bundled mouse for menu control

Specifications

BrandRelife
ModelMC2
CategoryMicroscope Cameras
CompatibilityC-mount industrial microscopes, HDMI monitors, PC via USB
TechnologySony IMX678 4K sensor (1/1.8-inch, 2.0μm pixel), 3840×2160 photo resolution, 4K/1080p video at 30 fps, HDMI/Type-C output, 5x digital zoom, integrated multimeter probe (voltage, resistance, continuity)
Input VoltageDC 5V 2A (Type-C)
Weight260g (net)

Common Repair Uses

  • Verified bench uses for a microscope camera with an integrated multimeter.
  • PCB component and solder joint inspection
  • Microsoldering observation on a large display
  • Motherboard diagnostics with live voltage readings
  • Resistance and continuity checks on small components
  • Charging issue and hardware fault tracing
  • Pad and trace inspection before ISP wiring
  • Post-reballing and post-rework quality checks
  • Photo and video documentation for repair logs and training

Compatible Devices

  • Universal accessory scope. It pairs with C-mount microscopes, HDMI displays, and USB storage. It does not target specific phone models and inspects any phone board you place under the microscope.
  • C-mount industrial microscopes
  • HDMI monitors and TVs
  • Computers with USB connection
  • USB flash drives for photo and video storage
  • Type-C 5V/2A power supplies
  • Mobile phone motherboards (visual inspection and probing)
  • Laptop and tablet PCBs (visual inspection and probing)
  • Small electronic components and ICs on any PCB

FAQ

What is the product name?
The product name is Relife MC2 Multi-function Multimeter 4K Camera.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is MC2.
What is this product used for?
This product is used for inspecting PCBs under magnification while measuring voltage, resistance, and continuity with a probe on the same screen.
Which devices are compatible with this product?
This product is compatible with C-mount industrial microscopes, HDMI monitors, and PCs through USB. It does not depend on a phone model.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the Relife MC2 fit my microscope?
The MC2 uses the standard C-mount camera interface found on industrial microscopes. Check that your microscope has a C-mount camera port before you order.
What resolutions does the Relife MC2 record and output?
It captures 3840×2160 photos and records 4K or 1080p video at 30 fps. HDMI output switches between 4K and 1080p automatically, while USB output delivers 1080p at 30 fps or 4K at 15 fps.