RF4 RF-HD11A 4in1 Blades Set with Handle for Mobile Repair

Original price was: ₨ 1,500.Current price is: ₨ 1,200.

RF4 RF-HD11A Blade Set for Mobile Repair

The RF4 RF-HD11A 4in1 Blades Set with Handle gives your repair bench one scraper-knife handle for glue removal and IC prying. The aerospace-grade aluminum body resists corrosion and stays light in hand. The grip holds blades up to 6 mm wide, so you can fit straight or curved edges to the job. Technicians use this RF4 RF-HD11A blade set to clear adhesive from phone PCBs, lift IC edges and open glued assemblies without hunting for a separate tool. Mechanicpk stocks it for Pakistani repair shops that want a dependable manual tool at the workstation.

In stock

16 People watching this product now!
Description

RF4 RF-HD11A Blade Set: Precision Scraping and Prying for Phone Boards

Every board-level repair starts with clean access. Cured adhesive around a CPU, a charging IC or a shield bond slows your rework before the hot air gun even warms up. The RF4 RF-HD11A blade set removes that bottleneck with one scraper-knife handle that accepts the blades you already prefer. RF4 builds the handle from aerospace-grade aluminum, and the product information identifies the kit as a 4in1 blade set for phone PCB glue removal and IC prying. Mechanicpk supplies it as a core manual tool for technicians who treat adhesive removal as a precision job, not a brute-force one. If you run a repair bench in Pakistan, this is the tool that sits next to your tweezers and gets picked up first on every glued board.

Handle and Blade Grip: Key Technical Highlights

The handle clamps blades up to 6 mm wide, which covers most standard blades sold for phone repair. RF4 states that it supports the large majority of commercially available blades, so you pair the handle with straight edges for flat adhesive and curved edges for contoured surfaces. You choose the profile, and the handle keeps your grip consistent. Aerospace-grade aluminum gives the body high hardness and corrosion resistance, so the handle holds up to daily bench handling. The light weight keeps your hand steady during fine strokes and lets you work in confined spaces around shields and connectors. A rigid metal body also transfers your pressure straight to the blade tip, which gives you control when you lift the edge of a bonded IC instead of forcing it. Because the handle takes blades from the open market, you replace a worn edge without waiting on one specific part. That matters in a busy workshop, where a dull blade costs you minutes on every board.

Repair Workflow Fit: Where This Blade Set Works

Place this tool at the start of the board workflow, before soldering and reflow. Warm the area with a hot air station, then use the blade to lift softened glue from around the target IC. For a dead phone that needs an IC change, you clear the adhesive perimeter first, then move to your soldering station and flux. When a charging issue sends you to the charging IC or PMIC, the blade removes the bond material that otherwise traps the chip edge. A boot loop or hang on logo that traces back to a hardware fault often leads you to the CPU or eMMC area, and the blade clears the glue before ISP work or reballing begins. Under a microscope, a thin blade edge lets you work close to neighboring components with visible control. Fix the board in a PCB holder so both hands stay free, and finish with cleaning before you move to reballing kits or multimeter checks.

Why Technicians Choose This Handle and Blade Combination

A universal handle means you swap blade profiles as the job changes and keep one grip you know. The tool is manual, so it needs no power, no calibration and no software. That keeps it useful for service centers, training institutes and single-bench repair shops alike. Buyers in Pakistan looking for a mobile repair blade set usually build their rework station around a handle like this one. They add hot air stations, soldering stations and microscopes for the repair cycle, and they step up to the RF4 ceramic scraper when they need non-magnetic scraping of solder paste from stencils. You keep the cost of entry low, you keep the workflow clean, and you get a tool that handles the first and most repeated step in glued-board repair. Keep a straight blade for broad glue lines and a curved one for tight corners, and the same handle covers both tasks. Wipe the blade after each board so residue never carries over to the next repair.

Additional information
Weight0.15 kg
Q & A
Please login to post questions

Key Features

  • 4in1 blade set supplied with a handle
  • Handle grips blades up to 6 mm wide
  • Accepts straight and curved blades
  • Supports most commercially available blades
  • Aerospace-grade aluminum handle
  • High hardness and corrosion resistance
  • Lightweight body for fine control
  • Suits confined spaces on phone boards

Specifications

BrandRF4
ModelRF-HD11A
CategoryMobile Repair Blades and Scraper Tools
CompatibilityHandle grips blades up to 6 mm wide
MaterialAerospace-grade aluminum (handle)

Common Repair Uses

  • Glue removal and IC prying on mobile phone boards
  • PCB glue removal around ICs
  • IC prying during dismantling
  • Adhesive scraping on board surfaces
  • Lifting bonded component edges before hot air rework
  • Clearing glue before IC change
  • Opening glued assemblies during disassembly

Compatible Devices

  • Universal manual hand tool, not tied to a specific phone brand or model
  • Universal tool, not device-specific
  • Mobile phone PCBs where glue removal is needed
  • IC and CPU edges that need prying or lifting
  • Straight blades up to 6 mm wide
  • Curved blades up to 6 mm wide
  • Most standard commercially available repair blades within the 6 mm grip range

FAQ

What is the product name?
The product name is RF4 RF-HD11A 4in1 Blades Set with Handle.
What is the brand of this product?
The brand of this product is RF4.
What is the model of this product?
The model of this product is RF-HD11A.
What is this product used for?
This product is used for PCB glue removal and IC prying during mobile phone repair and dismantling.
Which devices are compatible with this product?
This is a universal manual hand tool. It is not tied to a specific phone brand or model, and it works on mobile phone PCBs and ICs where glue removal or prying is needed.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What blade width does the RF-HD11A handle hold?
The handle grips blades up to 6 mm wide, and RF4 states that it supports most commercially available blades, including straight and curved types.
What is the RF-HD11A handle made of, and does it suit daily workshop use?
The handle uses aerospace-grade aluminum, which RF4 describes as high-hardness and corrosion-resistant. The body is lightweight, which suits fine work in confined spaces.