SDR845-101 RF Transceiver IC for Snapdragon 845 Boards

₨ 250

SDR845 RF Transceiver IC for Snapdragon 845 Repair

The SDR845-101 is an RF transceiver IC for Snapdragon 845 (SDM845) boards. It sits between the modem and the antenna path, handling the conversion between baseband signals and radio frequencies. When a Snapdragon 845 phone shows no network, weak signal, or a network drop that a software reset can’t fix, this IC is a common cause. The part comes brand new and tested, in a BGA package suited to standard hot air reballing. Confirm the RF path before you replace it, because antenna and PA faults produce similar symptoms.

12 People watching this product now!
Description

SDR845 RF Transceiver IC Overview

The SDR845 RF transceiver IC handles the RF signal path on Snapdragon 845 (SDM845) boards, between the modem and the antenna. When a phone loses network after liquid exposure or a failed reflow, this part is a primary suspect. Your repair starts with proof that the transceiver is at fault, not the antenna path. This listing covers where the IC sits, how to diagnose network faults, and how to handle the BGA package safely on your bench.

Where the RF Transceiver Sits in the Signal Path

On the motherboard, the RF transceiver takes digital data from the modem and converts it into the frequency the antenna transmits. It performs the reverse conversion on incoming signals. Because it sits close to the RF front end, it receives the same moisture and heat exposure as nearby components. A fault here usually leaves the phone functional in other respects. It simply loses the ability to register on the tower. Understanding this placement helps you narrow the fault before you lift anything.

Diagnosing Network Faults Before You Lift the IC

Start with the cheap checks. Inspect the antenna connectors, coax lines, and RF cable continuity, since a damaged antenna path mimics the same no-network symptom. Clean the board and inspect it under the microscope for corrosion near the RF zone. Check for a 2G-only lock or full signal bars with no data, both of which point toward the RF chain. Use a signal generator or a known-good donor board for comparison before you commit to a reball. This sequence saves you from a return visit when the real fault is elsewhere.

Reballing and Replacing the BGA Package

The package is a BGA part, so reball it with a controlled hot air station. Use an accurate temperature profile, apply flux evenly, and preheat the board to limit warping. Protect the surrounding PMIC and RF components, since heat spreads easily in this dense zone. Use matched-size solder balls so the joints hold under daily use. A brand new, tested unit avoids the hidden micro-cracks that can pass initial checks and fail later. Keep a stock of this IC for your Snapdragon 845 repairs so you can work without delays.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Qualcomm RF transceiver built for the Snapdragon 845 network path
  • Handles conversion between modem signals and antenna frequencies
  • Targets no-network and weak-signal faults on SDM845 boards
  • Compatible with Samsung Galaxy S9, S9+, Note 8, and Note 9 motherboards
  • Works with Xiaomi Mi 8 and other SDM845 devices, after revision check
  • BGA package suited to standard hot air reballing
  • Brand new and tested, not a pulled or recycled unit
  • Restores 4G/LTE lock when the transceiver is the confirmed fault

Specifications

BrandQualcomm
ModelSDR845-101
CategoryMobile Phone ICs
CompatibilitySnapdragon 845 (SDM845) platform
Supported DevicesSamsung Galaxy S9, S9+, Note 8, Note 9; Xiaomi Mi 8
TechnologyRF transceiver, BGA package
Weight0.01 kg

Common Repair Uses

  • Real-world workflows this IC supports on SDM845 boards
  • No network or no signal repair after confirmed hardware fault
  • Weak signal or signal drop after liquid damage
  • Network drop that persists after a clean software reflash
  • 2G-only lock when the phone fails to register on 4G/LTE
  • Full signal bars with no data connection
  • RF transceiver reballing on a hot air BGA station
  • Board-level RF diagnostics before the IC change
  • Network fault isolation against antenna and PA module faults

Compatible Devices

  • Snapdragon 845 (SDM845) platform, device-level scope limited to the models below
  • Snapdragon 845 (SDM845) chipset family
  • Samsung Galaxy S9
  • Samsung Galaxy S9+
  • Samsung Galaxy Note 8
  • Samsung Galaxy Note 9
  • Xiaomi Mi 8
  • Other SDM845 boards, confirm board revision before replacement
  • Motherboard RF transceiver position on SDM845 platforms

FAQ

What is the product name?
The product name is SDR845-101 RF Transceiver IC.
What is the brand of this product?
The brand of this product is Qualcomm.
What is the model of this product?
The model of this product is SDR845-101.
What is this product used for?
This product is used to repair no-network, weak-signal, and network-drop faults on Snapdragon 845 motherboards.
Which devices are compatible with this product?
This product is compatible with the Snapdragon 845 (SDM845) platform, including Samsung Galaxy S9, S9+, Note 8, Note 9, and Xiaomi Mi 8 boards.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Can this IC fix no-network issues after liquid damage on Snapdragon 845 boards?
Yes, when diagnostics confirm the RF transceiver is the fault rather than the antenna path or PA module, replacing this IC restores network function.
Can this IC be reballed with a standard hot air BGA station?
Yes, it uses a BGA package and can be reballed with a controlled hot air profile and matched solder ball size.