77638-21 PA IC – Power Amplifier for Redmi 6/6A, Galaxy S9

₨ 450

77638-21 PA IC for Network Section Repair

The 77638-21 is a multimode multiband RF power amplifier module from the Skyworks 77638 family. It drives the 3G and 4G transmit path in Android handsets. Technicians across Pakistan fit it in the Redmi 6 and Redmi 6A network section, and parts distributors also list it for the Samsung Galaxy S9 (SM-G960). Fit it when a board shows no service, weak signal, or calls that drop the moment the phone transmits, once your diagnosis confirms a failed PA. Use ESD protection, and reflow it with controlled hot air so the laminate package and pads stay intact.

17 People watching this product now!
Description

77638-21 PA IC: Multimode RF Power Amplifier for the Transmit Chain

The 77638-21 PA IC sits at the end of the transmit chain in a phone’s network section. The transceiver generates a low-level RF signal, and this module amplifies it to the output level the antenna needs to reach the tower. The part number belongs to the Skyworks 77638 SkyLiTE family, a line of multimode multiband (MMMB) power amplifier modules for 3G and 4G handsets. Many shops stock it under the name “power IC,” and that label causes wrong diagnoses: the 77638-21 controls RF transmit power, not battery charging or voltage rails. If your fault points at the PMIC, this part will not solve it. If the fault sits in the RF transmit path, this module belongs on your repair bench.

What the 77638 Family Brings to the RF Section

Skyworks builds the 77638 family around a WCDMA/LTE amplifier block for low and mid bands, plus a multi-function control block. A CMOS controller inside the module talks to the baseband over the MIPI interface, so the phone’s software selects band and bias mode without discrete control lines. The RF input and output ports come internally matched to 50 ohms, which cuts down the passive components around the module. In 3G mode, the family datasheets list WCDMA, HSDPA, HSUPA, and HSPA+ support. In LTE mode, a DC-DC converter adjusts the amplifier supply to hold efficiency at each power level. The family combines an InGaP amplifier die and a silicon control die on a multi-layer laminate substrate. Skyworks publishes datasheets for sibling variants such as the -11 and -51, while the -21 suffix has no public datasheet, so treat band-level details as family characteristics and match the replacement by part marking and board position.

Fault Symptoms That Point to a Failed 77638-21

A damaged PA usually shows up as a network issue, not a dead phone. Common complaints include signal bars that vanish the moment you dial, calls that drop on connect, a phone that loses 4G and falls back to 2G or no service, or a board that never registers on the network even though IMEI and baseband read correctly. Water damage and impact often take out PA modules, and a short on the PA supply line can drag down the battery rail and heat up the board. Before you decide on IC change karna, confirm the fault. Check IMEI and baseband in software, measure the PA supply line for a short with your multimeter, and inspect the module under a microscope for corrosion or a cracked package. A corrupted network data partition produces similar symptoms, and that fault needs box chalana or a software fix, not a new PA.

Replacing the 77638-21 PA IC on Redmi 6 and Redmi 6A Boards

On the Redmi 6 and Redmi 6A, the 77638-21 handles the main cellular transmit path, which makes it a frequent replacement when these phones show network faults after drops or moisture. Mount the board in a PCB holder and shield nearby connectors and small components with heat-resistant tape. Apply flux around the module and lift it with your hot air station at controlled temperature and moderate airflow. The module’s large ground pad holds heat, so preheating the board helps the solder release evenly and protects the pads. Clean the pads with solder wick and check them under magnification for lifted or torn pads before you continue. Tin the new module lightly or use a matching stencil, align it with the pin-1 marker, and reflow until it self-centers. After fitting, test the phone on 3G and 4G, place a call, and watch current draw on a DC power supply during transmit. Stable current and clean network registration confirm the repair.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Multimode multiband RF power amplifier module from the Skyworks 77638 family
  • Handles the 3G and 4G cellular transmit path
  • MIPI digital control for band and bias selection
  • RF ports internally matched to 50 ohms
  • DC-DC supply tracking for efficiency at every power level
  • InGaP amplifier die with silicon control die on laminate substrate
  • Direct fit for the Redmi 6 and Redmi 6A PA position
  • SMD module suited to hot air reflow with flux and preheat

Specifications

BrandSkyworks Solutions
Model77638-21
CategoryMobile Phone ICs > Network / PA ICs
CompatibilityBoard-level replacement for handsets that carry the 77638-21 marking in the PA position
Supported DevicesXiaomi Redmi 6, Xiaomi Redmi 6A, Samsung Galaxy S9 (SM-G960, distributor-listed)
TechnologyMultimode multiband 3G/4G RF power amplifier module with MIPI control (77638 family)
MaterialInGaP amplifier die and silicon control die on multi-layer laminate (77638 family)

Common Repair Uses

  • No service or no network after a drop or water damage
  • Calls dropping as soon as the phone starts transmitting
  • Phone losing 4G and falling back to 2G or no service
  • Short on the PA supply line causing board heating or battery drain
  • Replacing a cracked or corroded PA module found under the microscope
  • Network section rebuild after water damage cleaning
  • Refitting a PA disturbed during adjacent rework

Compatible Devices

  • Verified at device level for Redmi 6/6A; Galaxy S9 per distributor listings; otherwise match by part marking
  • Xiaomi Redmi 6
  • Xiaomi Redmi 6A
  • Samsung Galaxy S9 (SM-G960)
  • Other Android boards carrying the 77638-21 marking in the PA position
  • Transmit scope: WCDMA/HSPA+ and LTE (77638 family characteristic)

FAQ

What is the product name?
The product name is 77638-21 PA IC.
What is the brand of this product?
The brand of this product is Skyworks Solutions.
What is the model of this product?
The model of this product is 77638-21.
What is this product used for?
This product is used for replacing a failed RF power amplifier in the network section of compatible mobile phones.
Which devices are compatible with this product?
This product is compatible with Xiaomi Redmi 6 and Redmi 6A, and distributors also list it for the Samsung Galaxy S9 SM-G960.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Is the 77638-21 a power IC or a PA IC?
The 77638-21 is an RF power amplifier module that boosts the transmit signal for the network section. It does not regulate battery or voltage rails, so it will not fix a PMIC fault.
Will replacing the 77638-21 fix no service on Redmi 6A?
It fixes no service only when the PA itself has failed. Check IMEI, baseband, and the PA supply line first, because corrupted network data or a damaged transceiver produces the same symptom.