MT6315FP 4-Phase Buck PMIC IC for Mobile Repair
₨ 350
MT6315FP 4-Phase Buck PMIC for CPU Power Rail Repair
The MT6315FP is a MediaTek power management IC that groups four step-down DC/DC converters into one 4-phase buck stage. Each phase delivers up to 5 A, which gives the CPU and GPU rails enough headroom under heavy load. The output range runs from 0.4 V to 1.19375 V, so the IC feeds the core voltage domains of the application processor. It ships in a 45-pin WLCSP measuring 2.35 x 3.44 mm, a footprint that calls for controlled hot air rework. Reach for this part when a board draws current, spikes, and never clears the logo.
MT6315FP PMIC IC: 4-Phase Buck Specifications and Repair Workflow
The MT6315FP PMIC IC sits in the CPU power path of MediaTek-platform Android boards. Within the MT6315 family, it combines four independent step-down converters into a single 4-phase buck stage, so the processor receives a regulated, high-current supply across several switching nodes at once. Your workflow starts with measuring the rail and only moves to replacing the IC after those measurements point to it. Treat this as a board-level part, because the rail, the feedback network, and the surrounding passives all need checking first.
Four-Phase Output Structure and Current Capacity
Four converters share the load in this IC, so each phase handles a portion of the total current instead of one converter carrying everything. Each phase supports up to 5 A, which keeps the regulator stable when the processor jumps from idle to gaming or camera load. The output adjusts between 0.4 V and 1.19375 V, so you can compare the measured rail voltage against this window during diagnosis. A rail that sits outside this range under load points toward a failed phase, a feedback fault, or a shorted output. Measure each output node under load rather than at idle, because many faults only appear when the processor works hard. Record the readings before you lift the IC, since that baseline tells you whether the replacement restored the expected behavior.
Operating Range and Package Handling
The IC operates across -30°C to 85°C, which covers the heat a phone board sees during extended use and charging. The 45-pin WLCSP package measures 2.35 x 3.44 mm, so the ball pitch leaves little margin for solder bridges. Work with a fine-pitch stencil and a steady hot air station with accurate temperature control. Overheating neighboring components is the bigger risk on a dense board, so shield nearby parts and preheat the board evenly. Inspect the pads under a microscope before reflow to confirm they are clean and undamaged. A clean pad surface and a controlled profile reduce the chance of a comeback repair.
Board-Level Repair Workflow
Start with a dead-after-flash or boot loop symptom and trace the power sequence from the battery input to the CPU rail. Use a multimeter in diode mode to check each output pin for a short to ground before you apply power. A shorted output often shows up as a phone that powers on briefly, pulls current, and then cuts out. Confirm the rail voltages after installing the replacement and compare them against the expected range. If the rail is clean but the board still hangs on the logo, move your diagnosis to the other power domains and the processor itself. This sequence keeps the repair focused on the IC only when the measurements justify it.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Four independent step-down converters in one 4-phase buck stage
- ✓Up to 5 A per phase for stable CPU and GPU core supply
- ✓Programmable output from 0.4 V to 1.19375 V
- ✓Compact 45-pin WLCSP package measuring 2.35 x 3.44 mm
- ✓Operating range of -30°C to 85°C
- ✓Suited to board-level diagnosis of CPU power rail faults
- ✓Requires controlled hot air rework and fine-pitch stencil work
- ✓Practical for workshops handling dead-after-flash and boot loop repairs
Specifications
| Brand | MediaTek |
|---|---|
| Model | MT6315FP |
| Category | Power Management IC (4-Phase Buck Converter) |
| Compatibility | MediaTek-platform Android smartphone boards (chipset-family scope) |
| Supported Devices | Not device-specific; cross-check the original IC marking on the board |
| Technology | Four-phase step-down DC/DC buck converter |
| Output Voltage | 0.4 V to 1.19375 V |
| Power Rating | Up to 5 A per phase |
| Dimensions | 2.35 x 3.44 mm (45-pin WLCSP) |
Common Repair Uses
- ✓CPU and GPU power rail diagnosis on Android boards
- ✓Dead-after-flash board diagnosis and power rail testing
- ✓Boot loop tracing through the CPU power sequence
- ✓Hang-on-logo checks for power rail faults
- ✓Diode-mode testing of output pins for shorts to ground
- ✓Current-draw measurement on the CPU rail under load
- ✓IC reballing and replacement for a shorted or damaged power IC
- ✓Hot air removal and pad inspection before reflow
- ✓Post-repair verification of rail voltages against the 0.4 V to 1.19375 V range
Compatible Devices
- ✓MediaTek-platform Android smartphone boards using the MT6315-family CPU power rail
- ✓MediaTek-platform Android smartphone boards using the CPU power rail
- ✓Chipset-family scope; device-level mapping not verified
- ✓Boards where the original top marking reads MT6315FP
- ✓Boards that use a 4-phase buck stage for CPU and GPU core supply
- ✓Universal for board-level replacement; not tied to one device model
- ✓Verify the board’s top marking before ordering
- ✓Replacement for shorted or failed CPU power ICs during board repair
- ✓Workshop rework on boards with WLCSP-class power ICs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What output voltage range does the MT6315FP support?
How much current can each phase deliver?
Related products
339S00108 WiFi IC For iPad Air iPad Pro 9.7 Replacement
In stock
343S0694 Touch IC U2402 iPhone 6 and 6 Plus Touch Black IC
In stock
358S IC T211 Samsung Tab Charging IC – Tab 3 USB Charger IC
In stock
PM8916 Power Control IC – Qualcomm PMIC for MSM8916 Boards
In stock



