WCN3988 Wifi iC – Qualcomm Dual-Band WLAN BT IC

₨ 300

Dual-Band WLAN and Bluetooth Combo IC

The WCN3988 Wifi iC is a Qualcomm single-die combo module that integrates 1×1 802.11 a/b/g/n/ac WLAN, Bluetooth with LE 5.x support, and FM radio on one chip. It operates on both 2.4 GHz and 5 GHz bands, so it handles the dual-band networks that modern access points use. The chip sits between the antenna and the main processor, which makes it the first wireless block to examine when a device shows Wi-Fi or Bluetooth faults. Its verified specifications make part selection straightforward for service centers and distributors supplying board-level wireless repair.

17 People watching this product now!
Description

The WCN3988 Wifi iC is a Qualcomm single-die wireless local area network, Bluetooth and FM combo solution, so one chip handles the Wi-Fi, Bluetooth and FM radio functions that many boards split across separate parts. The chip supports 1×1 IEEE 802.11 a/b/g/n/ac WLAN and operates on both 2.4 GHz and 5 GHz bands, so it connects to the dual-band networks found in homes, offices and test environments. Its Bluetooth function follows the Bluetooth and LE 5.x standards with HS enabled, covering both classic and low-energy accessories. For a repair technician, this integration changes the diagnostic approach, because a dead Wi-Fi symptom and a dead Bluetooth symptom can trace back to the same silicon, while a fault limited to one band often points toward the RF front end instead. Start your diagnosis by confirming which wireless functions fail, since that narrows the problem before any component comes off the board. The signal path on a working board runs from the antenna to the WCN3988 and then to the main processor. Each segment of that route can fail independently, so check the antenna contacts, RF traces and connectors before you lift the combo IC. A damaged antenna feed produces symptoms that look exactly like a failed chip, and replacing the IC will not fix that. Once the antenna path tests clean, measure the supply rails feeding the module with a multimeter and compare them against the board reference. Linux power-sequencing work for the WCN39xx family describes a simple power management unit that distributes voltages across internal rails, and it notes that chips in this generation lack the separate enable GPIO lines found on later devices. In practice, you cannot bring this chip up with a control line you can probe on the board, so judge its power from the rails and the board side instead. Bluetooth firmware for this part follows a ROM-version naming scheme that the Linux Bluetooth driver handles directly. For ROM version 0x0200, the driver loads the patch file apbtfw10.tlv with the nvm file apnv10.bin, and for ROM version 0x0201 it loads apbtfw11.tlv with apnv11.bin. Reading a device log helps you separate hardware faults from software ones. When the initialization log never reaches the firmware download stage, the cause usually sits in power or hardware. When the download begins and then fails, the firmware or calibration data deserves attention. This sequence gives you a clear checkpoint before you commit time to rework. The WCN3988 also appears on embedded Android mainboards. A manufacturer manual for a board built around an octa-core processor running at up to 2.1 GHz describes the WCN3988 as the module that carries wireless traffic between the antenna and the main chip. That same reference uses a single mainboard design, which keeps the wireless path short and simplifies board-level inspection during repair. This IC suits repair centers that handle Wi-Fi and Bluetooth faults at board level, technical training institutes teaching RF diagnostics, and distributors supplying replacement parts for Qualcomm combo platforms. Pair it with a hot air station that offers fine nozzles, flux for clean pad wetting, a microscope for joint inspection and a multimeter for rail checks. Before soldering, confirm the part marking and the supplier part number WCN-3988-0-82BWLPSP-TR-00-0 against your board reference, because the correct variant matters more than the package appearance. Reflow with controlled heat and short dwell times to protect the surrounding components and the solder mask. Verify the replacement with a Wi-Fi scan and a Bluetooth pairing test before you return the device to the customer.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Single-die WLAN, Bluetooth and FM combo design
  • 1x1 IEEE 802.11 a/b/g/n/ac WLAN
  • Dual-band operation on 2.4 GHz and 5 GHz
  • Bluetooth with LE 5.x and HS support
  • FM radio function integrated on the same chip
  • Antenna-to-processor signal path (antenna, WCN3988, main chip)
  • Bluetooth firmware handling for ROM versions 0x0200 and 0x0201
  • Supplier part number WCN-3988-0-82BWLPSP-TR-00-0

Specifications

Brand EntityQualcomm
Product EntityWCN3988 Wifi IC
Technology Entity802.11ac WLAN, Bluetooth 5.x LE, FM radio, dual-band 2.4/5 GHz
Compatible Device EntitiesEmbedded Android mainboards built on the WCN3988 combo platform
Repair Process EntityBoard-level wireless IC replacement and RF diagnostics
Industry EntityMobile repair and PCB rework

Common Repair Uses

  • Embedded Android mainboards built on the WCN3988 combo platform
  • Boards using the Qualcomm WCN3988 WLAN and Bluetooth combo module

Compatible Devices

  • Diagnosing Wi-Fi faults caused by a dead or unstable WLAN path
  • Diagnosing Bluetooth faults such as pairing failures and accessory dropouts
  • Checking antenna feed continuity before replacing the combo IC
  • Board-level IC replacement using hot air rework
  • Verifying the supply rails that feed the combo module
  • Reading initialization logs to separate hardware faults from firmware faults

FAQ

What is the product name?
The product name is WCN3988 Wifi iC.
What is the brand of this product?
The brand of this product is Qualcomm.
What is the model of this product?
The model of this product is WCN3988.
What is this product used for?
This product provides 1x1 802.11 a/b/g/n/ac WLAN, Bluetooth with LE 5.x and FM radio functions on a single chip.
Which devices are compatible with this product?
This product is compatible with embedded Android mainboards built on the WCN3988 combo platform. Phone-model compatibility is not verified.
Does this chip support 5 GHz Wi-Fi?
Yes. The WCN3988 operates on both 2.4 GHz and 5 GHz bands.
Does this chip include Bluetooth and FM?
Yes. It integrates Bluetooth with LE 5.x support and FM radio alongside its 1x1 WLAN function.