iPhone X Hot Air Welding Nozzle for QUICK 2008 Station
₨ 800
QUICK 2008 Hot Air Nozzle for iPhone X Board Work
This nozzle is built for the QUICK 2008 hot air rework station. It directs the station’s airflow onto a small area of the board, so you can heat one component without disturbing its neighbors. Confirm the fit with your station before ordering.
In stock
QUICK 2008 Hot Air Nozzle for iPhone X Rework
A QUICK 2008 hot air nozzle is the part that focuses heat on the component you are working on. The QUICK 2008 is a 700 W, microprocessor-controlled hot air station with an LED temperature display, a brushless vortex fan, and a set temperature range of 100 to 500 °C. It ships with four nozzles, so you can match the nozzle to the component.
Where This Nozzle Fits in Your Workflow
Hot air removal of small ICs is a routine step on iPhone X boards. Technicians usually mask neighboring components with high-temperature tape, apply flux, heat the IC from its edges toward the center, and lift it only once the solder has melted. The nozzle controls how that heat is spread. A tip that matches the IC footprint keeps the heat on the target and reduces the risk to nearby parts.
Matching the Nozzle to the Component
Choose the nozzle by the footprint of the component you are removing, not by convenience. A nozzle that is too large spreads heat onto neighboring pads. A nozzle that is too small heats the component unevenly. Set the air flow low enough that small parts do not shift before the solder is ready.
Using the QUICK 2008 Station
The station’s digital display lets you hold a set temperature. Its memory stores three presets, so you can switch between a lead-free profile and a leaded profile without re-entering values. The ESD-protected design and quiet, vibration-free fan make the station suitable for long sessions at the bench.
| Weight | 0.9 kg |
|---|
Key Features
- ✓Designed for the QUICK 2008 hot air station
- ✓Directs heat onto a targeted component area
- ✓Works with the station’s 100 to 500 °C range
- ✓Brushless vortex airflow from the QUICK 2008 fan
- ✓LED temperature display on the station
- ✓Three memory presets on the station
- ✓ESD protection on the station
- ✓Lead-free soldering support on the station
Specifications
| Brand Entity | QUICK |
|---|---|
| Product Entity | Hot air welding nozzle |
| Technology Entity | Hot air rework |
| Compatible Device Entities | QUICK 2008 station, iPhone X |
| Repair Process Entity | SMD and IC removal |
| Industry Entity | Mobile repair |
Common Repair Uses
- ✓Removing and replacing small ICs on iPhone X boards, such as the charging IC
- ✓Heating a single component on a board while protecting neighboring parts
- ✓Desoldering and resoldering SMD components on the QUICK 2008 station
Compatible Devices
- ✓QUICK 2008 hot air rework station
- ✓(Add further entries once the nozzle’s fit is confirmed.)



