Relife RL-601S Plus 2-in-1 Screen & Back Glass Fixture

₨ 8,500

RL-601S Plus Rotating Fixture for Back Glass Removal

The RL-601S Plus is a 2-in-1 universal fixture built for back cover glass removal and LCD or OLED screen separation. Its 360-degree rotation lets you reach every side of the device without unclamping it, and the suction cup supports heat-free screen disassembly. Silicone anti-frame pads protect edges and paint, while the aluminum alloy base with non-slip footing keeps the setup steady on your bench. It accepts smartphones and tablets up to 7 inches, so one station can handle both separation tasks.

In stock

18 People watching this product now!
Description

RL-601S Plus Rotating Fixture for Back Glass and Screen Removal

The RL-601S Plus rotating fixture from Relife gives your repair bench a stable hold on the phone during back glass and display work. It is a 2-in-1 universal fixture, which means you handle two jobs that usually need separate setups: back cover glass removal and LCD or OLED screen disassembly. You secure the device in a heavy aluminum alloy base and rotate it 360 degrees, so every edge stays within reach. You do not need to reposition the phone after each step, which keeps your workflow moving.

Where the Fixture Fits in Your Repair Workflow

A typical back cover job starts with securing the device, then opening the seam, then separating the glass. This fixture covers the securing step and the separation step in one setup, so the phone never has to move between stations. Pair it with a heat source and plastic opening tools for the seam work. Keep a spare phone nearby for test fits before you commit to a full separation on a customer device.

360-Degree Rotation and Secure Positioning

Your workflow improves when the phone stays in the fixture from start to finish. The rotating head lets you access each side of the device, which matters when you work along curved back glass or check the edges during separation. Position the device so the frame sits between the silicone pads, then secure it until the phone sits flat and does not shift. Check the grip before you apply any tool, because a loose device is where frame damage usually begins. The aluminum alloy construction keeps the setup rigid under the pressure of separation.

Suction Cup Screen Separation

The fixture includes a powerful suction cup for screen disassembly. The manufacturer positions this method as heat-free, which lowers the risk of heat damage to the display during separation. Seat the cup on the screen surface, then apply steady, even pressure as you work the separation. If you are handling a model you have not worked on before, test the setup on a spare panel first. That step shows you how much force the suction needs before you touch the customer’s device.

Silicone Pads and Frame Protection

Anti-scratch silicone pads sit between the fixture and the frame, which helps protect edges and painted surfaces. This matters on devices with polished or painted frames, where a bare metal contact point can leave visible marks. Keep the pads clean and free of debris before each job, since trapped grit can scratch the frame as easily as the tool itself. Replace worn pads promptly so the protection stays consistent across your daily workload.

Stable Base for Precision Work

The heavy, non-slip base keeps the fixture planted during precision work. A stable base lets you focus on the separation instead of holding the device with one hand, which reduces the chance of a slip at the critical moment. This makes the fixture practical for shops that run back glass replacement, screen service, and back cover jobs every day. Consistent stability across repeated jobs also helps your technicians develop the same reliable technique.

Additional information
Weight1.0 kg
Q & A
Please login to post questions

Key Features

  • 360° rotating base for access to all sides of the device
  • Suction cup for heat-free screen disassembly
  • Anti-scratch silicone pads that protect the frame and edges
  • Heavy, non-slip base for stable precision work
  • Aluminum alloy construction

Specifications

BrandRelife
ModelRL-601S Plus
CategoryMobile Repair Fixture
Type2-in-1 Universal Fixture
CompatibilityUniversal, smartphones and tablets up to 7 inches
Supported DevicesSmartphones and tablets up to 7 inches
Technology360° rotation, suction cup screen separation
MaterialAluminum alloy and silicone

Common Repair Uses

  • Verified workflows for back cover glass removal and screen separation
  • Back cover glass removal on smartphones
  • LCD and OLED screen disassembly with the suction cup
  • Holding the device steady for precision work on the back or screen

Compatible Devices

  • Universal fixture, not model-specific; scope verified to smartphones and tablets up to 7 inches
  • Smartphones up to 7 inches
  • Tablets up to 7 inches

FAQ

What is the product name?
The product name is Relife RL-601S Plus 2-in-1 Screen & Back Glass Fixture.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is RL-601S Plus.
What is this product used for?
This product is used for back cover glass removal and LCD or OLED screen separation.
Which devices are compatible with this product?
This product is compatible with smartphones and tablets up to 7 inches. It is a universal fixture, not device-specific.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What size phones and tablets does the RL-601S Plus support?
It supports smartphones and tablets up to 7 inches.
Does the RL-601S Plus use heat to separate the screen?
The fixture uses a suction cup for screen separation, and the manufacturer positions this as a heat-free method that lowers the risk of heat damage.