RF4 RF-PO15 Silicone Repair Pad With Storage Bracket
₨ 3,999
RF4 RF-PO15 Silicone Repair Pad for Phone Repair Benches
The RF4 RF-PO15 silicone repair pad gives mobile technicians a 450 x 280 mm working surface for hot air rework, IC handling and BGA soldering. Several holes hold screws, chips and small parts in place, and the storage bracket keeps the mat organized between jobs. Lay the board flat, keep your tools within reach and stop small parts from rolling off the edge. The size fits a full motherboard alongside your hot air nozzle, tweezers and flux.
In stock
RF4 RF-PO15 Silicone Repair Pad for Organized Board-Level Repair
The RF4 RF-PO15 silicone repair pad gives your repair bench a silicone work surface for hot air rework, soldering and component handling. Its 450 x 280 mm surface holds a motherboard, your tweezers and a set of small parts without spreading them across the desk. For a technician who runs hot air work daily, a dedicated silicone platform protects the table underneath and keeps tiny screws and IC chips from rolling away mid-job.
Where This Pad Fits in Your Repair Workflow
Every board repair starts with a stable surface. Before you lift a shield or remove a chip, the board needs to sit flat and stay put, and this pad gives you that base. During hot air work, the silicone surface keeps the nozzle’s stray heat away from your desk, so the bench stays clean. During IC replacement, you keep the board in one spot while you move between the soldering iron, the flux and the hot air gun. The pad also supports the diagnostic stage. You can lay a dead phone board flat, probe test points with a multimeter and note your readings without the board sliding around. Once the job ends, the mat gives you a clear area to lay out parts in the order they came off, which speeds up reassembly and lowers the chance of a missing spring or screw.
Hole Layout for Screws, IC Chips and Small Parts
The surface carries several holes that secure screws, IC chips and other small parts in fixed positions. Set a screw in its hole and it stays upright while you work on the board above it. Drop a removed chip into a hole and it sits still instead of drifting toward the edge. This matters on crowded benches, where one lost part can stall a repair for an hour. Organize parts by board section: place the screws from the bottom shield in one row and the chips from the main IC area in another. Keep matching parts together, so you reassemble each section with confidence and without guessing where each piece belongs.
Storage Bracket and Bench Organization
The RF4 RF-PO15 comes with a storage bracket, which helps you keep the mat upright and out of the way when the bench gets crowded. Store the mat on the bracket between jobs so the surface stays flat and your working area stays open. The bracket works best alongside your daily kit. Keep flux pens, tweezers and small brushes within reach beside the mat, and return the hot air nozzle to its holder when you pause. A tidy bench saves time on every board you open, and it helps you find the right tool before a heated job starts.
| Weight | 1.41 kg |
|---|
Key Features
- ✓450 x 280 mm working surface
- ✓Silicone construction
- ✓Several holes to secure screws, IC chips and small parts
- ✓Storage bracket included
- ✓Flat surface keeps boards steady during rework
- ✓Works alongside hot air stations and soldering irons
- ✓Easy to store between repair jobs
- ✓Compact mat for phone repair benches
Specifications
| Brand | RF4 |
|---|---|
| Model | RF-PO15 (RF-P015) |
| Category | Silicone Repair Pad |
| Compatibility | Universal, not device-specific |
| Supported Devices | Mobile phone, tablet and computer motherboards |
| Material | Silicone |
| Dimensions | 450 x 280 mm |
Common Repair Uses
- ✓IC removal and replacement on a dead phone board
- ✓BGA reballing setup with hot air heating
- ✓Holding screws and small parts during disassembly
- ✓Protecting the workbench during hot air rework
- ✓Board-level diagnostics with the board held flat
- ✓Laying out parts in order before reassembly
- ✓Organizing parts by board section during teardown
- ✓Keeping the repair bench tidy between jobs
Compatible Devices
- ✓Mobile phone motherboards (universal, not device-specific)
- ✓Tablet logic boards and motherboards
- ✓Laptop and desktop computer motherboards
- ✓Hot air rework stations
- ✓Soldering iron and BGA soldering setups
- ✓Screws, IC chips and small parts holders
- ✓Microscope-based board repair benches
- ✓Workbench surfaces for mobile phone repair shops
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can this pad hold screws and IC chips during hot air work?
Is this pad suitable for hot air rework on phone motherboards?
Related products
RELIFE RL-004SA silicone pad – Anti-slip
In stock



