TE-051 Solder Paste Flux Booster Push Needle Dispenser

₨ 399

TE-051 Push Needle Flux Booster

The TE-051 solder paste flux booster gives you push-rod control over flux, solder oil, green oil, and tin paste during board-level mobile repair. The aluminum alloy body holds a needle-barrel syringe, and the three included needle tips let you switch between fine pad work and heavier paste deposits. You press to dose and release to stop, which keeps flux off nearby components during reballing, IC replacement, and charging port repair. Technicians across Pakistan use it on dead phone, charging issue, and hang on logo hardware jobs. Mechanicpk supplies the TE-051 as a durable bench accessory that pairs with hot air stations, soldering stations, and microscopes.

In stock

12 People watching this product now!
Description

Solder Paste Flux Booster for Controlled Flux Dosing

The TE-051 solder paste flux booster turns a standard flux syringe into a push-controlled dispenser. You load your flux, solder oil, green oil, or tin paste syringe into the aluminum alloy body, fit one of the three needle tips, and press to place a measured bead exactly on the pad or IC edge. On a busy repair bench, that control decides whether a reballing job finishes clean or ends with flux spread across the whole board.

Three Needle Tip Sizes for Pad-Level Precision

The kit ships with three needle tips in different sizes, so you match the nozzle to the job instead of forcing one opening to cover everything. A fine tip places flux on tight BGA pads, fine-pitch connector legs, and jumper points. A wider tip pushes thicker tin paste onto larger shield pads and charging port terminals. The push-rod action converts finger pressure into a steady flow, which keeps your dosing consistent when your hands tire late in the shift.

You stop the flow by releasing pressure, so you avoid the drip that ruins a clean pad right before reflow. Bare syringes with a hand-squeezed plunger often release too much material in one push. The booster gives you a firmer grip and finer feedback, which cuts waste and saves expensive flux and paste.

Aluminum Alloy Build for Daily Bench Use

Aluminum alloy forms the full body, finished in silver grey. The structure stays simple: a barrel holder, a push mechanism, and replaceable needle tips. With no electronics and no seals to fail, the tool survives the drops, flux splashes, and constant handling that a repair bench delivers every day. The light body also sits comfortably in your hand during long reballing sessions, so you keep a steady grip on the syringe while you work under the microscope.

Corrosion resistance matters in a workshop where flux residue lands on everything. You wipe the aluminum body clean after each session, swap a clogged needle tip, and reuse the same booster for months. That replaceable-tip design lowers your running cost compared with disposable dispensing pens.

Where It Fits in the Board-Level Repair Workflow

Flux placement sits at the start of almost every rework operation. Before you do an IC change karna, you apply flux under the chip to help the hot air station lift it cleanly. After you clean the pads with a soldering station, you flux them again before reballing with a stencil and reballing kit. During charging port repair, you add flux to the new connector pins before reflow so the joints wet properly.

The TE-051 supports all of these steps. You use it for dead phone diagnosis when you jumper lagana on broken tracks, for charging issue repairs, and for hang on logo jobs that trace back to a lifted eMMC or CPU ball. Pair it with a PCB holder to keep the board steady, a microscope to watch the bead land, and a multimeter to confirm continuity after the joint cools.

For shops that handle high daily volume, one booster per bench keeps flux dosing uniform across technicians. Mechanicpk stocks the TE-051 alongside ISP pinout tools, eMMC programmers, UFS adapters, test boxes, and reballing kits, so you can build a complete rework station from one supplier.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • Push-rod design gives controlled flux and paste dosing
  • Aluminum alloy body resists daily workshop wear
  • Three needle tips in different sizes suit fine and heavy application
  • Silver grey finish with a lightweight body
  • Simple structure with no electronics to fail
  • Replaceable needle tips lower running cost
  • Handles solder oil, green oil, tin paste, and rosin flux
  • Compact size fits any repair bench kit

Specifications

ModelTE-051
CategorySoldering Accessories / Solder Flux Paste Tools
CompatibilityNeedle-barrel syringe flux tubes holding solder oil, green oil, tin paste, or rosin flux
TechnologyManual push-rod syringe propulsion with interchangeable needle tips
MaterialAluminum Alloy

Common Repair Uses

  • Flux and paste placement during board-level mobile repair
  • BGA reballing preparation
  • IC removal and replacement (IC change karna)
  • eMMC and UFS chip reflow
  • Charging port repair
  • Jumper wire soldering on broken tracks
  • Pad tinning after cleaning
  • Display connector and FPC pad work
  • Dead phone and hang on logo hardware fault repair

Compatible Devices

  • Universal — not device-specific; works with any mobile PCB or board that needs flux or paste application
  • Samsung motherboards
  • Oppo and Vivo motherboards
  • Infinix and Tecno motherboards
  • Xiaomi and Realme motherboards
  • Huawei and Honor motherboards
  • iPhone logic boards
  • Laptop and tablet PCBs
  • General SMD and BGA electronics boards

FAQ

What is the product name?
The product name is TE-051 Solder Paste Flux Booster.
What is the brand of this product?
Mechanicpk supplies this product under its model name, TE-051.
What is the model of this product?
The model of this product is TE-051.
What is this product used for?
This product pushes flux, solder oil, green oil, and tin paste through a needle tip for controlled application during mobile phone and PCB repair.
Which devices are compatible with this product?
This tool is universal and not device-specific. It works on any mobile phone, tablet, or PCB where you apply flux or paste.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the TE-051 come with flux or solder paste?
No. The package contains one TE-051 booster and three needle tips. You supply your own flux, solder oil, green oil, or tin paste syringe.
Which materials can the TE-051 push through its needle?
It handles solder oil, green oil, tin paste, and rosin flux loaded in a needle-barrel syringe.