2UUL DW21 Solder Away (Gun Type) 2020 Desoldering Wick
₨ 600
Desoldering Wick Dispenser for Board Cleanup
The 2UUL DW21 Solder Away (Gun Type) 2020 Desoldering Wick packs 2 meters of 2.0mm braided copper wick into a hand-held dispenser. A thumb wheel feeds fresh braid to the pad, so you pull solder off BGA pads, IC footprints, and charging port joints without handling bare wick. A grip housing gives you a firm hold, and a stainless steel nozzle keeps heat away from your fingers. Mechanicpk supplies this desoldering wick dispenser to technicians who clean boards daily and want a controlled feed instead of loose rolls on the bench.
Out of stock
2UUL DW21 Desoldering Wick Dispenser for Precision Pad Cleaning
A desoldering wick dispenser changes how you clean a board. The 2UUL DW21 Solder Away (Gun Type) 2020 Desoldering Wick replaces the loose roll with a gun-style housing, a thumb wheel feed, and 2 meters of 2.0mm braided copper wick. You advance the braid with your thumb, press it onto the pad with your soldering iron tip, and draw molten solder into the weave. Mechanicpk supplies this desoldering wick dispenser to technicians who run board-level repair and want a controlled, repeatable way to clear pads before reflow or reballing.
Build Quality and Dispenser Mechanics
The DW21 packs a thumb wheel dispenser, a twisted wire turntable, and a grip housing into one hand-held body. The thumb wheel carries an anti-hot design, so your thumb stays clear of the heated braid while you feed it forward. A stainless steel heat dissipation nozzle guides the wick to the pad and insulates your fingers against heat, which matters during long sessions beside a hot iron tip. A wire twister handles storage and recycling of unused braided copper wire, so you keep spare length tidy instead of letting it tangle on the bench. The wick measures 2.0mm wide and 2 meters long, a general-purpose width for pad cleanup across phone boards. Because the housing holds the braid, you feed fresh wick forward with one thumb and keep the remaining length clean for the next board.
Role in the Board-Level Repair Workflow
Pad cleaning follows every IC removal. After you lift a CPU, eMMC, UFS, or power IC with a hot air station or soldering station, leftover solder sits on the pads in uneven mounds. You drag the DW21 wick across those pads with your iron, flatten the surface, and prepare the footprint for a fresh chip or a reballing kit stencil. The same flow applies to charging port pads, battery connector pads, and ISP test points after you finish diagnosing a dead phone. Hold the board in a PCB holder, work under a microscope, and check each cleaned pad with a multimeter for shorts between neighboring pads before you reflow. Technicians who chase a charging issue, a boot loop issue, or a hang on logo fault from a damaged joint rely on this step to restore a clean, flat contact surface. The DW21 does not replace flux, a reballing kit, or a stable temperature-controlled iron. It removes the excess solder those tools leave behind.
Why a Gun-Type Wick Feed Suits Daily Bench Work
Loose braid rolls tangle, put your fingers near heat, and waste length. A gun-type feed addresses each problem at the source. The thumb wheel gives you a measured advance, the grip housing steadies your working hand, and the heat-insulating steel nozzle protects you during repeated passes. You keep one hand on the board holder or tweezers and the other on the DW21, so your iron, your wick, and your pad stay aligned. For a repair shop that processes several boards per day, that consistency helps you clean pads faster and waste less wick. Pair the DW21 with a quality soldering station, a hot air station, a reballing kit, and a microscope, and you cover the full path from chip removal to a ready footprint. If you currently run basic wick rolls, the DW21 gives you an upgrade path within the same consumable category without changing how your iron and flux already work.
| Weight | 0.3 kg |
|---|
Key Features
- ✓2.0mm wide braided copper wick for pad and joint cleanup
- ✓2 meter wick length per unit
- ✓Anti-hot thumb wheel dispenser for controlled braid feeding
- ✓Twisted wire turntable inside the dispenser body
- ✓Grip housing for a firm one-hand hold
- ✓Stainless steel anti-scalding heat dissipation nozzle
- ✓Wire twister for storing and recycling unused braided copper wire
- ✓Gun-type 2020 design that keeps the braid off the bench
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL DW21 Solder Away (Gun Type) 2020 Desoldering Wick |
| Technology Entity | Braided copper desoldering wick with thumb wheel dispenser and stainless steel heat dissipation nozzle |
| Compatible Device Entities | Smartphone motherboards, iPhone logic boards, tablet motherboards, general electronics PCBs |
| Repair Process Entity | BGA pad cleaning, IC footprint preparation, solder removal, reballing preparation |
| Industry Entity | Mobile phone repair, PCB repair, soldering and rework consumables |
Common Repair Uses
- ✓Cleaning leftover solder from pads after CPU, eMMC, or UFS removal
- ✓Flattening BGA pads before reballing
- ✓Preparing IC footprints for a replacement chip
- ✓Clearing solder bridges between fine-pitch pads
- ✓Cleaning charging port pads during charging issue repair
- ✓Removing excess solder from battery connector joints
- ✓Cleaning ISP test points on a dead phone
- ✓Tidying joints after rework on boot loop issue or hang on logo boards
Compatible Devices
- ✓Universal, not device-specific. The wick works on any board where you remove solder.
- ✓Android smartphone motherboards (brand-independent)
- ✓iPhone logic boards
- ✓Tablet motherboards
- ✓Feature phone PCBs
- ✓BGA pads under CPU, eMMC, and UFS footprints
- ✓Power IC and PMIC footprints
- ✓Charging port and connector pads
- ✓General electronics PCBs
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What width and length is the 2UUL DW21 desoldering wick?
How does the DW21 protect my hand from heat during desoldering?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



