Mechanic ORI Mini Multi-functional PCB Fixture
₨ 3,300
Mechanic ORI Mini PCB Fixture
The Mechanic ORI Mini PCB fixture holds iPhone and Android motherboards steady while you work on CPU, NAND and dot projector repairs. Its dual-axis double-bearing clamp tightens both sides of the board together, and the 360° rotating platform lets you reach any chip without releasing the board. The CNC-machined aluminum alloy body measures about 185 x 55 x 24 mm, so it fits beside your hot air station and microscope on a crowded repair bench. Mechanicpk supplies the ORI Mini across Pakistan for technicians who want a compact, adjustable PCB holder for daily micro-soldering and chip-level rework.
In stock
Mechanic ORI Mini PCB Fixture for Dual-Axis Board Holding
The Mechanic ORI Mini PCB fixture gives your bench a compact dual-axis clamp for holding mobile motherboards steady during chip-level work. Mechanic designed the ORI Mini as a universal chip-positioning fixture for iPhone and Android boards, and it suits technicians who handle CPU, NAND and dot projector jobs every week. The body measures about 185 x 55 x 24 mm, so it sits beside your hot air station and microscope without crowding the workspace. If you run a repair shop in Lahore, Karachi or Islamabad and need a dependable PCB holder for daily micro-soldering, this fixture covers the core job. It locks the board in place so both hands stay free for the iron, the hot air gun and the tweezers.
Dual-Axis Double-Bearing Clamping
The ORI Mini drives its clamp plates with a double-axis linkage supported by dual precision bearings. Both plates move together, so the fixture centers the PCB and grips it evenly along the edges. The dislocation buckle design keeps the board from creeping while you apply flux, solder or hot air near a chip. You set the board between the plates, tighten the clamp by hand and start working. The platform rotates through 360 degrees, so you turn the board to approach a chip from any side without loosening the clamp. That rotation saves time when you chase a hardware fault across a dense logic board and need different angles on different ICs.
Where It Fits in Your Rework Workflow
Clamp the board in the fixture before you start any IC change karna job. Position the chip under your microscope, then bring in the hot air station or soldering station. The ORI Mini suits CPU and NAND work on iPhone and Android motherboards, and it also holds dot projector assemblies during repair. When you handle a dead phone with a charging issue or a display problem, the fixture keeps the board still while you probe, clean pads and place fine jumper wires for jumper lagana. A steady board means cleaner solder joints, fewer slipped tweezers and less risk of lifting a pad. Pair the fixture with your multimeter, reballing kit and flux of choice, and the board stays locked in one position from the first inspection through the final test.
Build, Size and Bench Handling
The fixture uses CNC-machined aluminum alloy, which keeps the weight low while the clamp holds firm. The mini form factor suits small repair benches, mobile technician toolkits and training lab stations where space runs short. Compared with a basic spring-clip holder, the ORI Mini gives you adjustable clamping, bearing-supported movement and rotation in a smaller package. That makes it a practical upgrade if you currently balance boards on foam or hold them with tape. If your daily work involves larger boards, add a bigger Mechanic PCB holder to your bench alongside the Mini and keep the Mini for compact phone boards. Mechanicpk stocks Mechanic fixtures for Pakistani repair shops, so you can build a complete holder, microscope and hot air setup from one supplier.
| Weight | 0.15 kg |
|---|
Key Features
- ✓Dual-axis linkage with dual-plate clamping
- ✓Dual precision bearings for smooth clamp movement
- ✓360° adjustable rotating platform
- ✓Dislocation buckle design that grips firmly
- ✓CNC-machined aluminum alloy body
- ✓Compact 185 x 55 x 24 mm form factor
- ✓Universal fit for iPhone and Android motherboards
- ✓Works alongside hot air stations, soldering stations and microscopes
Specifications
| Brand | Mechanic |
|---|---|
| Model | ORI Mini |
| Category | PCB Holder / Repair Fixture |
| Compatibility | Universal mobile motherboard fixture for iPhone and Android boards |
| Technology | Dual-axis double-bearing linkage with dual-plate clamping, 360° rotation |
| Material | CNC-machined aluminum alloy |
| Dimensions | 185 x 55 x 24 mm |
Common Repair Uses
- ✓Board holding and chip positioning during mobile motherboard repair.
- ✓CPU chip-level repair
- ✓NAND chip repair
- ✓Dot projector repair
- ✓Micro-soldering under a microscope
- ✓Holding boards during hot air rework
- ✓Jumper wire soldering on dead phone boards
- ✓Pad cleaning and board inspection
- ✓Training and practice soldering
Compatible Devices
- ✓Universal, not device-specific. Holds iPhone and Android motherboards within the clamp range.
- ✓iPhone logic boards
- ✓Android phone motherboards
- ✓Boards with CPU/SoC chips
- ✓Boards with NAND flash chips
- ✓Dot projector assemblies
- ✓Small mobile sub-boards
- ✓Compact IC and chip carrier boards
- ✓Training and practice boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Can the Mechanic ORI Mini rotate the board while it stays clamped?
What is the Mechanic ORI Mini made of and how big is it?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



