Gsm-Sources 861 Series 10mm Hot Air Nozzle

₨ 1

861 Series 10mm Nozzle for Hot Air Rework

The Gsm-Sources 861 Series 10mm hot air nozzle gives your 861-series hot air station a mid-size airflow outlet for board-level rework. A 10mm opening covers a wider heating area than the 4mm to 6mm nozzles. It suits mid-size ICs, shield cans, connectors, and BGA packages. You swap it onto your 861 hot air gun in seconds and move between jobs without changing your station. Mechanicpk stocks this nozzle for Pakistani technicians, repair shops, and service centers that need dependable airflow control on every motherboard job. Add it next to your smaller nozzles and you cover most daily hot air tasks on your repair bench.

Out of stock

19 People watching this product now!
Description

Gsm-Sources 861 Series 10mm Hot Air Nozzle for Precision Rework

The Gsm-Sources 861 Series 10mm hot air nozzle fits technicians who run an 861-series hot air station and need a wider, steadier heat footprint than a narrow tip delivers. A nozzle shapes the airflow, and airflow decides whether a package lifts cleanly or the board suffers heat damage. At 10mm, this nozzle focuses heat on mid-size components while it limits spread to the parts around them. You use it for reflow, IC removal, and pre-heat work on mobile phone boards.

Why a 10mm Opening Matters on the Repair Bench

Every nozzle diameter solves a different problem. A 4mm tip suits small passives and tight connectors. A 10mm opening suits packages that need an even thermal spread across the whole body. When you heat a mid-size IC with a tip that is too small, the corners stay cold while the center overheats. A 10mm outlet spreads heat across the package, so solder balls under the chip melt at nearly the same moment. That even melt lets you lift the IC without dragging pads or tearing traces. Technicians who handle hardware fault jobs, charging issues, and dead phone cases keep this size within reach for mid-size parts such as power ICs, audio ICs, and storage packages.

Fit and Workflow on 861-Series Hot Air Stations

This nozzle matches the 861 series of hot air stations, the platform most Pakistani repair shops already run for PCB rework. You fit it over your hot air gun outlet and start working without adapter parts. Keep your temperature and airflow settings moderate for the package size, hold the gun steady above the chip, and let the 10mm opening do the heating. Pair it with a hot air station that offers stable airflow control, a PCB holder, flux, and a microscope for accurate results. Plenty of technicians keep a full set of nozzles from 4mm to 12mm on the bench, and the 10mm tip handles the largest share of everyday board-level rework.

Where It Fits in Your Rework Process

Hot air rework covers three stages: pre-heat, reflow, and removal. The 10mm nozzle serves all three on mid-size components. You pre-heat the area to protect the board from thermal shock, reflow until the solder liquefies, and lift the part with tweezers once the joints release. After removal, you clean the pads, apply fresh flux, and reball or replace the part. When you need a tighter heat zone for neighboring components, step down to a smaller nozzle. When a larger package demands more coverage, step up to a wider one. Keeping the 10mm size in that lineup gives you a dependable middle step and fewer compromises on each job.

Buying Guidance for Pakistani Repair Shops

Shop owners and service centers buy nozzles in sets, but a single 10mm replacement saves money when a tip wears out or goes missing. Mechanicpk supplies the Gsm-Sources 861 Series 10mm hot air nozzle for technicians who want to restock one size without buying a full kit. Check your station model against the 861 series before you order, and keep spare nozzles on hand so a damaged tip never stops a job in the middle of a busy day.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 10mm outlet diameter for even heat across mid-size packages
  • Fits 861-series hot air stations
  • Quick swap onto the hot air gun outlet
  • Works across phone, tablet, and general PCB rework
  • Pairs with smaller and larger nozzles for a complete size range
  • Suits pre-heat, reflow, and removal stages
  • Practical middle size for daily board-level work
  • Stocked at Mechanicpk for repair shops across Pakistan

Specifications

BrandGsm-Sources
Model861 Series 10mm Nozzle
CategoryHot Air Nozzle
Compatibility861-series hot air stations
Nozzle Diameter10mm

Common Repair Uses

  • Mid-size IC and BGA rework on mobile phone motherboards.
  • Mid-size IC removal and reflow
  • Shield can removal for board access
  • Charging IC and power IC replacement
  • Audio IC and connector rework
  • PCB pre-heating before component removal
  • Reflow of cold solder joints on dead phone boards
  • Reballing preparation (heating the package before lift-off)
  • Charging issue and hardware fault repair on motherboards

Compatible Devices

  • Universal board-level rework scope — not device-specific. It fits 861-series hot air stations and works on mobile phone motherboards across brands.
  • 861-series hot air stations
  • Quick 861DW hot air gun (861-series platform)
  • Mobile phone motherboards, universal across brands
  • Android phone PCBs (Samsung, Oppo, Vivo, Infinix, Tecno)
  • iPhone logic boards for mid-size IC rework
  • Tablet motherboards
  • Mid-size BGA packages on mobile boards
  • Shield cans and connector areas on phone PCBs

FAQ

What is the product name?
The product name is Gsm-Sources Nozzle 861 Series 10mm.
What is the brand of this product?
The brand of this product is Gsm-Sources.
What is the model of this product?
The model of this product is 861 Series 10mm.
What is this product used for?
This product shapes the hot air outlet for IC removal, reflow, and pre-heating on mobile phone motherboards.
Which devices are compatible with this product?
This product is compatible with 861-series hot air stations.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which hot air stations does the 861 series 10mm nozzle fit?
It fits 861-series hot air stations. Check your station model against the 861 series before you order.
What size components suit a 10mm hot air nozzle?
A 10mm nozzle suits mid-size ICs, shield cans, connectors, and BGA packages that need an even heat spread across the whole body.