YCS 6W-50g Thermal Paste CPU Cooling Paste Silicone
₨ 1,550
6W Silicone Thermal Paste, 50g Pack
YCS 6W-50g Thermal Paste CPU Cooling Paste Silicone gives repair shops a 6W thermal paste for mobile repair and computer cooling work in a single 50g pack. The silicone-based compound sits between the processor and its heatsink or heat spreader and carries heat away from the chip. You use it on mobile phone boards, notebook CPUs, desktop processors and graphics cards where overheating causes frequent restarts, game lag or high GPU temperature. The 6W grade sits between the 4W and 8.5W options in the YCS 50g range, so you can match the paste to the job. Mechanicpk supplies it to technicians and service centers across Pakistan.
In stock
6W Thermal Paste for Mobile Repair and Computer Cooling Jobs
YCS 6W-50g Thermal Paste CPU Cooling Paste Silicone is a 6W thermal paste for mobile repair benches that also covers notebook and desktop CPU work. The silicone-based compound fills the microscopic gaps between a processor surface and its heatsink or heat spreader, so heat travels into metal instead of sitting in a trapped air pocket. YCS packs this grade in 50g, a quantity that suits a workshop repasting boards every day rather than a single enthusiast build. The 6W rating places it between the 4W entry grade and the 8.5W top grade in the YCS 50g range, which gives buyers a clear step when they match paste to the job.
How the 6W Grade Handles Heat Transfer
Every processor surface and heatsink base carries fine machining ridges, and air trapped in those ridges insulates the chip. A thermal paste displaces that air and builds a continuous path for heat. YCS rates this paste at 6W, the middle grade of its 4W, 6W and 8.5W range, so you get stronger conduction than a basic compound without paying for the top grade on every job. The manufacturer positions the paste against CPU heating, frequent restarts, game lag and high graphics card temperature, the symptoms technicians trace back to a dried or poorly applied thermal interface. A silicone base gives the compound a grease-like consistency, which lets you spread a thin, even layer with a spatula or a plastic card and avoid the thick blobs that raise chip temperature instead of lowering it. Match the amount to the device: a phone board with a small processor needs only a minimal film, while a notebook CPU with a large heatsink base takes a slightly wider spread. Start small, press the heatsink down evenly, and check the spread pattern during a test fit before you commit to final assembly. Reusing a dried, cracked layer is a common mistake, so scrape it off completely each time and apply fresh paste on every service.
Where It Fits in the Rework and Reassembly Workflow
Thermal paste work closes a repair. You finish board-level work with a soldering station or hot air station, replace an IC under a microscope, or reball a chip with a reballing kit, and the heat path above the processor still needs attention. Clean the old residue with alcohol, apply a thin layer of fresh paste to the die or heat spreader, and refit the shield or heatsink. On notebooks, you repeat the same sequence for the CPU and GPU after you clean the cooler. Hold the board in a PCB holder while you apply the paste so you never press on neighbouring components, and check the board with a multimeter before you power the device. If a phone still runs hot after repasting, move to ISP pinout tools and software diagnostics to separate a thermal problem from a hardware fault on the board. That diagnostic order saves you from replacing parts that were never faulty and keeps the customer’s repair cost predictable.
Buying Notes for Repair Shops and Service Centers
The 50g pack gives a workshop a long supply for daily repasting jobs and lowers the cost per job compared with small syringes. Technicians in Pakistan who handle laptop overheating, phone heat complaints and CPU cooler servicing can use one paste across all three categories, which keeps stock management simple. You also give customers a straight answer when they ask why a repaste costs less than a new cooler or board. The YCS range lets you offer the 4W grade for budget jobs, this 6W grade for standard jobs, and the 8.5W grade for demanding builds. Store the pack sealed, use a clean spatula for every application, and keep paste off connector pins, pads and exposed solder joints. Wipe any overflow before you reassemble, and your repaste covers one of the most common thermal faults that reaches a repair counter. Training institutes and multi-bench service centers also gain from one consistent paste, because every technician follows the same application standard and results stay comparable between benches.
| Weight | 0.50 kg |
|---|
Key Features
- ✓6W thermal grade from the YCS 4W / 6W / 8.5W paste range
- ✓Silicone-based compound for heat transfer between chip and heatsink
- ✓50g pack sized for daily workshop repasting
- ✓Built for CPU heating, frequent restart and high GPU temperature problems
- ✓Works across mobile phone, notebook and desktop computer repair
- ✓Grease-style consistency that spreads in a thin, even layer
- ✓Mid-range grade that balances conduction and cost per job
- ✓One paste standard for phone, laptop and CPU cooler servicing
Specifications
| Brand Entity | YCS |
|---|---|
| Product Entity | YCS 6W-50g silicone thermal paste (CPU cooling paste) |
| Technology Entity | Silicone-based thermal interface compound, 6W grade |
| Compatible Device Entities | Mobile phone processors, notebook CPUs, desktop CPUs, graphics cards (GPU) |
| Repair Process Entity | Thermal paste replacement, heatsink and heat spreader repasting, post-rework reassembly |
| Industry Entity | Mobile phone and computer repair, PCB repair, GSM service centers in Pakistan |
Common Repair Uses
- ✓Thermal interface replacement across mobile phone, notebook and computer repair
- ✓CPU heatsink repasting on desktop computers
- ✓Laptop and notebook thermal paste replacement
- ✓GPU repasting for high graphics card temperature
- ✓Replacing dried or cracked paste on phone processors
- ✓Reducing motherboard heat that causes frequent restarts
- ✓Fixing game lag linked to CPU overheating
- ✓Reassembly after IC replacement or reballing
- ✓Routine preventive maintenance on workshop and service center machines
Compatible Devices
- ✓Mobile phones, notebooks and computers (universal thermal paste, not model-specific)
- ✓Mobile phone motherboards (processor and heat spreader contact area)
- ✓iPhone logic board repasting
- ✓Notebook and laptop CPUs
- ✓Notebook and laptop graphics chips
- ✓Desktop computer CPUs
- ✓Desktop graphics cards (GPU)
- ✓CPU heatsink and cooler contact surfaces
- ✓Universal use — not device-specific
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What is the difference between the 4W, 6W and 8.5W YCS 50g thermal pastes?
Can I use this thermal paste on mobile phone processors as well as laptop CPUs?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



