YCS 183°C 50g Soldering Paste Light Blue Bottle

₨ 1,200

YCS 183°C Medium-Temperature Solder Paste

The YCS 183°C 50g Soldering Paste in a light blue bottle gives your repair bench a medium-temperature paste for BGA, IC, CPU and PCB work. You get a 50g container that covers daily reballing, pad rebuilding and IC replacement on mobile logic boards. YCS positions this grade between its 138°C/150°C low-temperature pastes and its 199°C/215°C high-temperature pastes, so you can match the paste to the board and the heat budget of nearby components. Technicians in Pakistani repair shops use this 183°C soldering paste for mobile repair when a hardware fault needs a clean, strong joint.

In stock

18 People watching this product now!
Description

183°C Soldering Paste for Mobile Repair: YCS 50g Medium-Temperature Grade

The YCS 183°C 50g Soldering Paste in a light blue bottle gives you a dependable medium-temperature option for board-level work. This 183°C soldering paste for mobile repair sits in the middle of the YCS range. The brand also sells 138°C and 150°C low-temperature pastes and 199°C and 215°C high-temperature pastes. You pick the 183°C grade when a joint needs real heat to flow properly and you still want to protect the components around it. Repair shops across Pakistan reach for pastes like this on dead phone boards, charging issue repairs and display problem jobs where an IC change decides the outcome.

Where 183°C Sits in the Repair Workflow

Every soldering job on a mobile PCB starts with a choice of melting range. A medium-temperature paste gives you a middle path between delicate low-temperature work and demanding high-temperature rework. You use it for BGA reballing, CPU and eMMC chip replacement, and power IC jobs. You also use it to rebuild lifted pads and tin the contact points of small SMD components. YCS markets this paste for BGA, IC, CPU and PCB precision soldering repair, which covers the main tasks that come across a technician’s bench.

Applying the Paste for Clean Joints

Clean pads before you apply anything. Remove old solder with a wick, wipe the area with flux remover, and check the surface under your microscope. Spread a thin, even layer through a stencil for reballing, or place small dots by hand for single components. Work the paste with a flat blade until it reaches a smooth texture. Heat the board with your hot air station and watch the paste turn from grey to shiny. That change tells you the joint has flowed. YCS does not publish a reflow profile for this paste, so test your station settings on a scrap board before you touch a customer’s phone. Start with lower airflow, because strong airflow blows small components off the pads.

Building Your Soldering Setup Around It

The paste performs best when your supporting tools match the job. A hot air station with stable temperature control gives you repeatable results, and a soldering station handles pad cleanup and touch-ups. A reballing kit with stencils helps you place uniform solder balls on BGA chips. A PCB holder keeps the board steady while you work, and a microscope lets you inspect each joint at the pad level. Keep a multimeter nearby to check for shorts after reflow. If you work on ISP, eMMC or UFS repairs, this paste also supports the soldering side of those jobs when you move a chip to a programmer adapter and back to the board.

Why Technicians Choose the 50g Size

The 50g container holds enough paste for regular use across many repairs, which suits shops that rework boards every day. The compact bottle stores easily on a crowded bench and travels well for field service. YCS lists this paste as a low-residue formulation suited to fine-pitch components, and the supplier sheets describe smooth application and strong joints. If your repair list includes lower or higher melting requirements, you can step to the 138°C or 199°C versions from the same brand and keep your workflow familiar.

Additional information
Weight0.50 kg
Q & A
Please login to post questions

Key Features

  • YCS 183°C medium-temperature solder paste
  • 50g container for regular bench use
  • Light blue bottle for easy identification on a crowded bench
  • Designed for BGA, IC, CPU and PCB precision soldering repair
  • Smooth application for fine-pitch and micro-component work
  • Low-residue formulation suited to mobile device logic boards
  • Fits the YCS range alongside 138°C, 150°C, 199°C and 215°C pastes
  • Works with hot air rework stations and fine-tip soldering tools

Specifications

BrandYCS
ModelYCS 183°C 50g Soldering Paste (Light Blue Bottle)
CategorySolder Paste
CompatibilityBGA, IC, CPU and PCB soldering repair
TechnologyMedium-temperature solder paste, 183°C
Weight50g

Common Repair Uses

  • Solder paste work on mobile and electronics boards.
  • BGA reballing
  • CPU and SoC replacement
  • eMMC and UFS chip reballing
  • IC change on dead phone boards
  • Charging IC and power IC replacement
  • Pad rebuilding on lifted or damaged pads
  • Tinning small SMD component contacts
  • Hot air rework on logic boards

Compatible Devices

  • Universal solder consumable for mobile phone and electronics PCBs. It is not device-specific.
  • Android smartphone logic boards (Samsung, Oppo, Vivo, Infinix, Tecno and other brands)
  • iPhone logic boards where a medium-temperature paste suits the job
  • BGA chips on mobile motherboards
  • CPU and SoC rework on phone boards
  • eMMC and UFS chip reballing
  • Power management and charging ICs
  • SMD resistors, capacitors and small components
  • General PCB pads and contact points

FAQ

What is the product name?
The product name is YCS 183°C 50g Soldering Paste Light Blue Bottle.
What is the brand of this product?
The brand of this product is YCS.
What is the model of this product?
The model of this product is the YCS 183°C 50g Soldering Paste.
What is this product used for?
This product is used for BGA, IC, CPU and PCB soldering repair on mobile phone boards.
Which devices are compatible with this product?
This is a universal solder consumable for mobile and electronics PCBs, so it is not limited to specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What does the 183°C rating mean on this soldering paste?
The 183°C figure is the melting-temperature grade of this medium-temperature paste. You set your hot air station to reflow it properly, and you test your settings on scrap boards first because YCS does not publish a full reflow profile.
How does this 183°C paste differ from the other YCS paste grades?
YCS sells 138°C and 150°C low-temperature pastes, this 183°C medium-temperature paste, and 199°C and 215°C high-temperature pastes. The temperature number tells you which melting range you are working with.