YCS Halogen Free No Clean Solder Flux Paste 10cc
₨ 550
No Clean Flux Paste for Mobile Repair
The YCS Halogen Free No Clean Solder Flux Paste 10cc (Transparent) gives your bench a halogen-free, lead-free, no-clean flux for BGA chip, IC and SMD soldering on mobile phone and computer boards. The paste spreads evenly across pads, keeps smoke low and leaves minimal residue, so reballed chips and replaced ICs look clean without a long wipe-down. The 10cc pack fits daily technician use, from charging IC jobs to CPU rework on a dead phone. Mechanicpk supplies it to repair shops across Pakistan that want predictable flux chemistry at the rework station.
In stock
No Clean Flux Paste for Mobile Repair: YCS Halogen Free 10cc Transparent
The YCS Halogen Free No Clean Solder Flux Paste 10cc (Transparent) gives technicians a no clean flux paste for mobile repair work where BGA chips, ICs and SMD parts need clean, repeatable joints. YCS builds this flux as a halogen-free, lead-free, no-clean paste, so residue stays minimal and the board keeps a tidy finish after reflow. The transparent paste keeps pads and chip edges visible while you work. Pakistani repair shops use this class of flux every day on charging IC jobs, CPU and eMMC reballing prep and connector replacement, often on boards that arrive as a dead phone or a hang on logo case.
Chemistry and Technical Highlights
This flux follows a halogen-free, no-clean formulation. Halogen-free chemistry avoids chlorine and bromine based activators, which lowers the corrosion risk that aggressive fluxes leave on fine-pitch pads. The no-clean design means the leftover residue stays minimal, so you can leave the board as is or wipe it with IPA when you want a spotless finish before final testing. YCS positions the paste for BGA chip soldering and PCB repair on mobile phones and computers. The product listing credits it with stable flow, low smoke and solder insulation behaviour that lowers the risk of short circuits between pads. The 10cc pack keeps a working supply on the bench for many IC change jobs without tying up cash in bulk stock.
Where It Fits in Your Rework Workflow
Flux sits at the start of every good solder joint, so this paste earns a place next to your hot air station and soldering iron. Apply a thin layer on the cleaned pads, place the BGA chip or IC, then bring the hot air station up to temperature and let the joint flow. The flux removes oxide from the pad and the solder ball, which helps the solder wet evenly instead of balling up or leaving a cold joint. On reballing jobs, a thin film under the stencil helps each solder ball seat and melt uniformly. For tinning pads before an IC change, spread a light coat, run the iron across the pad and watch the solder flow smooth. After the joint cools, inspect it under a microscope and check continuity with a multimeter before you close the phone. Technicians fixing a boot loop issue, a charging issue or a network issue at board level rely on this sequence to keep each repair repeatable.
Buying Notes for Repair Shops and Service Centers
Flux consumption tracks your rework volume, so shops that run several IC and BGA jobs a day should stock it alongside their core tools. Pair it with Hot Air Stations and Soldering Stations for temperature-controlled reflow, Reballing Kits for stencil work, PCB Holders to keep boards steady and Microscopes for joint inspection. If you already stock basic rosin flux, this halogen-free no-clean paste is a clean upgrade for boards where you want low residue after reflow. Keep the cap closed after each use and store the pack away from direct heat so the paste stays consistent from the first job to the last. Mechanicpk ships to technicians and workshops across Pakistan, so you can restock without waiting on a long supply chain.
| Weight | 0.20 kg |
|---|
Key Features
- ✓Halogen-free formulation
- ✓No-clean, low-residue finish after soldering
- ✓Lead-free formulation
- ✓Transparent paste for clear pad visibility
- ✓Stable flow during reflow
- ✓Low smoke at the rework station
- ✓Solder insulation that lowers short-circuit risk between pads
- ✓Compact 10cc pack for bench use
Specifications
| Brand | YCS |
|---|---|
| Category | Soldering Flux Paste |
| Compatibility | Mobile phone and computer PCB soldering, BGA chip soldering and repair |
| Technology | Halogen-free, lead-free, no-clean flux formulation |
| Capacity | 10cc |
| Color | Transparent |
Common Repair Uses
- ✓Real-world workflows for this flux
- ✓BGA chip soldering and re-seating
- ✓IC change on dead phone motherboards
- ✓Reballing preparation with a stencil
- ✓Pad tinning before component placement
- ✓Charging IC and charging port soldering
- ✓Hot air reflow of SMD parts
- ✓Jumper wire and trace repair on hardware faults
- ✓Board-level fixes for boot loop and hang on logo cases
Compatible Devices
- ✓Universal flux, not device-specific; suited to board-level soldering on the following
- ✓Smartphone logic boards (brand-independent)
- ✓BGA chips and CPU packages on mobile boards
- ✓eMMC and UFS memory chip pads
- ✓Power management and charging ICs
- ✓SMD components on phone PCBs
- ✓Flex connector and charging port pads
- ✓Laptop and computer motherboards
- ✓General PCB soldering and rework
FAQ
What is the product name?
What is the brand of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is no clean flux paste safe to leave on a mobile phone board after BGA soldering?
Can I use this halogen-free flux paste for BGA chip soldering and reballing?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



