Mechanic ES240 24-in-1 Electric/Manual Screwdriver Set
₨ 3,500
Dual-Mode Electric Screwdriver for Phone Repair
The Mechanic ES240 combines a powered driver and a manual driver in one 128 mm body. A 500mAh lithium battery runs three speed gears (145, 188 and 210 RPM) with 0.2 N·m electric torque. When you power off, the head locks and gives you up to 3 N·m of manual torque. Twenty-four S2 steel bits on a universal 4 mm interface cover Phillips, Torx, hex, slotted, Y-type, pentagonal and triangle screws. A built-in LED lights the screw area and a battery display shows charge level. Type-C charging keeps it ready on a busy repair bench.
Out of stock
Mechanic ES240: The Best Electric Screwdriver for Mobile Repair Benches
If you want the best electric screwdriver for mobile repair, the Mechanic ES240 gives you a pen-sized hybrid that runs powered and manual in one body. A 500mAh lithium battery drives three speed gears at 145, 188 and 210 RPM. A self-locking head turns the handle into a manual driver rated up to 3 N·m. You get 24 S2 steel bits on a universal 4 mm interface, a built-in LED and a battery level display. Mechanic builds the ES240 for phone, tablet and small-electronics disassembly, so it earns a permanent spot on the bench of any repair shop or service center in Pakistan.
Drive System, Speed Gears and Torque Figures
The ES240 runs on a DC 3.7V system with Type-C charging. The 500mAh high-density lithium battery delivers up to 120 minutes of continuous idle runtime per charge, and the battery level display tells you when to plug in before a long session. Electric mode produces 0.2 N·m and switches between forward and reverse with a one-click start. You pick from three gears. Use the 145 RPM gear on small screws near flex connectors and shield frames. Move to 188 or 210 RPM for long screw runs on back covers and mid-frames. When you switch the tool off, or when the battery runs flat, the head locks automatically. That lock turns the body into a manual driver with up to 3 N·m of torque, so you can break loose factory-tight screws and feel the final tightening yourself.
24 S2 Steel Bits for Phone Disassembly
The kit ships 24 bits in S2 steel on a universal 4 mm interface. At 40 mm, the bits reach into deep, narrow screw holes. Coverage includes five Phillips sizes up to PH2, a +2.5 middle-plate cross bit, Torx T2, T3, T4, T5, T6, T8 and T10, slotted SL1.0 and SL2.5, and hex H1.5, H2.0 and H2.5. You also get Y-type Y0.6 and Y1.0, pentagonal 0.8 and 1.2, and triangle 2.0 and 2.3. The middle-plate cross bit handles the board screws in some Apple phones. The built-in LED lights the screw area, so you read tiny heads clearly even under a crowded bench lamp.
Where the ES240 Fits in Your Repair Workflow
Every board-level job begins when you open the phone. A dead phone, a charging issue, a display problem or a hang on logo case all start with removing covers, shield plates and battery connectors. The ES240 handles that stage quickly and safely, so you reach the board with undamaged screws. After the phone is open, your next tools take over: a hot air station or soldering station for IC change karna and rework, a microscope and PCB holder for fine work, and a multimeter for fault tracing. If a dead after flash case needs ISP pinout tools, eMMC programmers or UFS adapters, the ES240 gets you to the board first. When the job ends, you refit the phone with the same tool and finish each screw by hand in manual mode. One compact driver replaces the drawer of mismatched drivers that slows down your repair queue.
| Weight | 0.50 kg |
|---|
Key Features
- ✓Dual-mode design: electric mode plus auto-locking manual mode in one body
- ✓Three speed gears at 145, 188 and 210 RPM
- ✓0.2 N·m electric torque and up to 3 N·m manual torque
- ✓24 S2 steel bits with a universal 4 mm interface and 40 mm length
- ✓Forward and reverse rotation with one-click quick start
- ✓Built-in LED for targeted lighting at the screw area
- ✓Battery level display
- ✓500mAh lithium battery with Type-C charging and 120 minutes of continuous idle runtime
Specifications
| Brand | Mechanic |
|---|---|
| Model | ES240 |
| Category | Screwdriver Sets / Mobile Repair Tools |
| Compatibility | Universal 4 mm bit interface; not specific to one phone brand |
| Supported Devices | Smartphones, tablets, laptops, cameras, drones and small electronics |
| Technology | Dual-mode electric and manual drive, 500mAh lithium battery, Type-C charging, 3-gear speed (145/188/210 RPM), 0.2 N·m electric torque, 3 N·m manual torque, LED lighting |
| Material | S2 steel bits |
| Rated Voltage | DC 3.7V |
| Dimensions | 128 x 17 x 17 mm |
| Weight | 134 g net / 308 g gross |
Common Repair Uses
- ✓Disassembly and reassembly work on phones and small electronics
- ✓Opening back covers and mid-frames
- ✓Removing shield plates before board-level repair
- ✓Disconnecting battery and display connector screws
- ✓Battery replacement
- ✓Charging port and daughterboard replacement
- ✓Display and screen replacement
- ✓Camera module removal
- ✓Tablet and small-electronics disassembly
Compatible Devices
- ✓Universal 4 mm bit system covering common screw types in phones, tablets and small electronics (not device-specific)
- ✓Smartphones (Samsung, Oppo, Vivo, Infinix, Tecno and other brands using standard Phillips, Torx or slotted screws)
- ✓Some Apple iPhone models (middle-plate cross bit)
- ✓Tablets
- ✓Laptops
- ✓Digital cameras
- ✓Drones
- ✓Small consumer electronics
- ✓Phone mid-frames and shield plates with Torx or Phillips screws
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What torque does the Mechanic ES240 deliver in electric and manual mode?
How long does the ES240 battery last and how do you charge it?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



