Mechanic ES360 36-in-1 Electric Screwdriver
₨ 4,000
Mechanic ES360 Electric Screwdriver Set
The Mechanic ES360 packs 36 S2 steel bits and one dual-mode handle into a compact set built for phone disassembly. Electric mode delivers 0.3 N·m for fast screw removal. Manual mode delivers 3.5 N·m for tight screws, and forward and reverse switching sits on the same handle. The bit range spans Phillips, Torx, tri-wing, hex, slotted, square, U-type, and tri-point heads, so one case covers back cover, bracket, and shield screws on your bench. If you need an electric screwdriver for mobile repair Pakistan technicians can start every job with, the ES360 gives you speed, control, and organised bit storage.
In stock
Electric Screwdriver for Mobile Repair Pakistan: Mechanic ES360 Overview
Looking for an electric screwdriver for mobile repair Pakistan workshops can run all day? The Mechanic ES360 packs 36 S2 steel bits and one handle that switches between electric and manual drive. It targets the step every job shares: opening the device. Before an IC change karna, a reballing session, or a charging issue diagnosis, someone has to pull back cover, bracket, and shield screws without stripping a single head. The ES360 handles that pass with 0.3 N·m of electric torque and 3.5 N·m in manual mode, so you match the force to the screw instead of fighting it.
Torque and Bit Coverage of the 36-in-1 Electric Screwdriver
The ES360 ships as a 36-in-1 electric screwdriver: one handle plus 36 bits in S2 steel with an anti-rust treatment. The bit range covers Phillips PH000, PH00, PH0 and PH1, U-type U2.5 and U2.6, tri-point ★0.8, ★1.2 and ★1.5, square S0 and S1, slotted SL1.0 through SL4.0, triangle ▲2.0, centre plate 2.5, and through pin 0.8. Security Torx runs T2, T3, T4, T5H, T6H, T8H, T10H, T15H and T20H. Tri-wing covers Y0.6, Y2.0 and Y2.5, and hex covers H0.9, H1.3, H1.5, H2.0 and H2.5. Electric mode delivers 0.3 N·m, enough to run out small screws quickly while keeping force low on fine threads. Manual mode lifts the ceiling to 3.5 N·m for a stubborn screw that needs a hand-fed break. Forward and reverse switching lets you drive and extract with the same handle. The case marks each bit with its model number, and the self-magnetized storage keeps sizes easy to find at a glance. That mix of speed and control makes the ES360 a practical electric screwdriver for mobile repair Pakistan benches can use for both fast removal and careful refitting.
Where the ES360 Fits in the Repair Workflow
A repair bench spends more time on disassembly than most owners track. Dead phone intake, hardware fault checks, display problem repairs, and network issue board inspections all begin with the same screw removal pass. The ES360 shortens that pass on repeat jobs such as back cover and bracket screws, so you save bench time for the work that earns the margin. Once the phone is open, the board moves through the rest of your workflow: a microscope for inspection, a PCB holder to steady the board, a hot air station or soldering station for rework, and a multimeter for continuity checks. ISP and storage jobs pull in test boxes, ISP pinout tools, eMMC programmers, and UFS adapters, while reballing kits cover BGA work. The screwdriver owns step one of that chain. Service centers with high daily volume feel the gain most, because a few seconds saved on each phone adds up across a shift, while a solo technician at a small counter gets full bit coverage without carrying a drawer of loose drivers. It also covers more than phones. The listed scope includes digital product repair, home appliance repair, outdoor repair, and factory repair, plus computers, glasses, and watches.
Electric Mode, Manual Mode and Bench Habits
Pick electric mode for repeat screws of one type, such as the same back cover screw across a batch of identical phones. Switch to manual mode when you meet a tight or corroded screw, or when you want to feel thread engagement on a soft board standoff. The manual-automatic design means the handle keeps working as a normal screwdriver when the battery runs low, so a flat battery never stops a job. Seat each bit fully in the handle, match the bit to the screw head before you start (check a worn head under your microscope if the size is unclear), and drop to manual mode on a damaged head so you control the pressure. Return bits to their marked slots after every job. That habit protects the S2 steel and keeps the set organised for the next technician on the bench.
| Weight | 0.35 kg |
|---|
Key Features
- ✓36-in-1 set: 1 handle plus 36 S2 steel bits
- ✓0.3 N·m electric torque for fast, low-force screw removal
- ✓3.5 N·m manual torque for tight screws
- ✓Manual-automatic integrated drive: keeps working as a normal screwdriver when the battery runs low
- ✓Forward and reverse switching
- ✓Bit range: Phillips, Torx, tri-wing, hex, slotted, square, U-type, tri-point, triangle
- ✓S2 steel bits with high hardness and anti-rust treatment
- ✓Case marks each bit’s model number, with self-magnetized storage
Specifications
| Brand | Mechanic |
|---|---|
| Model | ES360 |
| Category | Electric Screwdrivers / Mobile Repair Tools |
| Compatibility | Universal screw-head coverage. Not device-specific |
| Supported Devices | Mobile phones, computers, glasses, watches, digital products, home appliances |
| Technology | Manual-automatic dual-mode drive with forward and reverse switching |
| Material | S2 steel bits with anti-rust treatment |
| Electric Torque | 0.3 N·m |
| Manual Torque | 3.5 N·m |
| Bit Quantity | 36 bits plus 1 handle |
Common Repair Uses
- ✓Disassembly and reassembly at the start and end of board-level and part-level repair
- ✓Mobile phone disassembly before board repair
- ✓Back cover screw removal
- ✓Battery and bracket screw removal
- ✓Shield and mid-frame screw removal before IC change karna
- ✓Screen separation prep (removing frame screws)
- ✓Reassembly with controlled torque after reballing or rework
- ✓Home appliance and digital product repair
- ✓Batch screw removal on repeat jobs
Compatible Devices
- ✓Universal. Compatibility depends on screw-head type, not on a specific phone model or chipset family
- ✓Mobile phones (back cover, bracket, and shield screws)
- ✓Computers
- ✓Glasses
- ✓Watches
- ✓Digital products
- ✓Home appliances
- ✓Outdoor equipment
- ✓Factory precision parts
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What torque does the Mechanic ES360 deliver in electric and manual mode?
Which screw bits come with the Mechanic ES360?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



