2UUL DA970 Cuul Fan Vac Pro Turbo – 3-in-1 Repair Fan
₨ 6,500
3-in-1 Cooling, Vacuum and Drying Fan
The 2UUL DA970 Cuul Fan Vac Pro gives your repair bench rapid cooling, dust vacuuming and quick drying in one handheld unit. The turbo motor reaches a listed maximum of 130,000 RPM, and three speed modes (P0 to P2) switch with a single click. A rotatable nozzle lets you aim airflow at a CPU, an IC or a bare motherboard, and an integrated LED lights the work area. Technicians in Pakistan use it after hot air rework, during board cleaning and after liquid damage repairs. The compact 135 x 60 x 37 mm body fits next to a soldering station, a microscope or a PCB holder without taking up bench space.
In stock
2UUL DA970 Cuul Fan Vac Pro: Cooling, Vacuum and Drying for the Repair Bench
The 2UUL DA970 Cuul Fan Vac Pro packs three bench jobs into one 135 x 60 x 37 mm body. It cools a board, pulls dust and debris off it, and dries it. Every phone board that comes off a hot air station, out of a cleaning step or in as a liquid-damaged dead phone needs at least one of those steps. Most workshops currently cover them with a separate blower, a brush and a can of compressed air. The Cuul Fan Vac Pro Turbo replaces that pile with one tool, and its turbo motor reaches a listed maximum of 130,000 RPM. Mechanicpk stocks it for technicians and service centers who want a precise, repeatable airflow tool on the bench.
Speed Modes and Nozzle Control
The DA970 runs three speed settings, P0 to P2, and one click on the control cycles through them. That matters when you work at different stages of the same repair. A lower setting suits gentle drying of a freshly cleaned board, and the top setting suits fast cooling of a chip after you finish soldering. The rotatable nozzle lets you angle the airflow toward the exact area instead of blowing across the whole board. Double-click the power button after you switch the unit on and the integrated LED lights up, so you see the CPU area or the connector row you are working on without a separate lamp.
Where It Fits in Your Repair Workflow
Board-level repair follows a predictable sequence: diagnose, heat, rework, clean, dry, test. The DA970 supports four of those stages. After IC change karna or CPU rework with a hot air station, you cool the chip and the surrounding board quickly before you move to the next step. During cleaning, the vacuum function removes dust and debris from the board surface and from around chips. After a board spends time in liquid or goes through a cleaning step, the drying function clears moisture from surfaces before you power it up. That routine helps most on a charging issue or hardware fault that traces back to a liquid-damaged board. You can run the tool one-handed while the other hand holds a tweezer or a probe, because the lightweight body and ergonomic shape keep the nozzle steady.
Building a Cleaner Bench Around the Vac Pro
The Cuul Fan Vac Pro works as a support tool, so it pairs best with the equipment that creates or measures the heat on your bench. Place it beside your Hot Air Stations and Soldering Stations, and keep a PCB Holder under the board so your hands stay free for jumper lagana or reballing work. A Microscope shows you the debris you want the vacuum to clear, and a Multimeter confirms the board reads correctly after it dries. Technicians who also work on ISP, eMMC or UFS jobs use it to keep the board clean around the Test Boxes, ISP Pinout Tools, eMMC Programmers and UFS Adapters they connect. Reballing Kits and fine solder work benefit from the same quick cooling between passes. Browse the related categories on Mechanicpk to complete the setup.
| Weight | 0.358 kg |
|---|
Key Features
- ✓Three-in-one design: rapid cooling, vacuum cleaning and rapid drying
- ✓Turbo motor with a listed maximum of 130,000 RPM
- ✓Three speed modes (P0–P2), switched with a single click
- ✓Rotatable nozzle for targeted airflow
- ✓Integrated LED light, activated with a double-click of the power button
- ✓Lightweight, ergonomic, portable body
- ✓Vacuum kit version of the 2UUL Cuul Fan Pro line
- ✓Suited to cooling chips and motherboards and removing dust and debris
Specifications
| Brand | 2UUL |
|---|---|
| Model | DA970 (Cuul Fan Vac Pro) |
| Category | Mobile Repair Accessories – Cooling and Cleaning Tools |
| Compatibility | Universal – not device-specific |
| Supported Devices | Universal – not device-specific |
| Technology | Turbo cooling fan with vacuum function; speed modes P0–P2; maximum speed 130,000 RPM; rotatable nozzle; integrated LED |
| Dimensions | 135 x 60 x 37 mm |
| Weight | 358 g (net) |
Common Repair Uses
- ✓Cooling, vacuum cleaning and drying during board-level mobile repair
- ✓Cooling a CPU or IC after hot air rework
- ✓Cooling the board after soldering
- ✓Removing dust and debris from the board surface
- ✓Clearing debris from around chips before rework
- ✓Drying a board after cleaning
- ✓Drying surfaces after liquid exposure
- ✓Directing airflow at one area through the rotatable nozzle
- ✓Lighting the work area with the integrated LED
Compatible Devices
- ✓Universal — works on any phone, tablet or PCB you place on the bench; no device-specific pairing or software required
- ✓Android smartphone motherboards (Samsung, Oppo, Vivo, Infinix, Tecno and other brands)
- ✓iPhone logic boards
- ✓Tablet motherboards
- ✓Boards on a PCB holder during rework
- ✓CPU and IC areas after hot air rework
- ✓Boards after liquid exposure
- ✓Boards after cleaning
- ✓General electronics repair boards
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
How many speed modes does the 2UUL DA970 have and how do you switch them?
Can the DA970 cool a CPU or IC after hot air rework?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



