2UUL SC20 CPU Solder Melt for Easier CPU Pads Clean

₨ 1,200

CPU Pad Cleaning Paste for Mobile Boards

2UUL SC20 CPU Solder Melt for Easier CPU Pads Clean is a low-temperature solder paste that blends with the factory lead-free solder on CPU pads and lowers its melting point. You soften the stubborn alloy, wick it away with less iron heat, and reduce the risk of lifted pads and damaged traces on phone and laptop motherboards. The paste helps you clear residual solder faster and prepares the footprint for a new IC. Each 17 g net unit suits technicians, repair shops, and service centers that run CPU replacement and BGA rework. Order from Mechanicpk and keep your pad cleanup consistent from job to job.

In stock

16 People watching this product now!
Description

Low-Temperature Solder Paste for CPU Pad Cleanup

The 2UUL SC20 CPU Solder Melt for Easier CPU Pads Clean is a CPU pad cleaning solder paste that targets one stubborn step in board-level repair: removing the hardened factory lead-free solder left on the pads after you lift a CPU. You apply the paste, it blends into the old solder, and the mixed alloy melts at a lower temperature than the factory solder alone. Your wick then pulls the softened solder off in one clean pass instead of a long fight with a hot iron. Mechanicpk stocks this 2UUL paste for repair shops and service centers across Pakistan that run CPU swaps and BGA rework every week.

Why Factory Lead-Free Solder Resists Cleaning

Factory boards in phones and laptops use lead-free solder, and that alloy demands more heat to melt than the leaded solder most technicians keep on the bench. When you remove a CPU with a hot air station, the pads keep an uneven, oxidized layer of that hard solder. Pushing your iron temperature higher or pressing harder with the tip puts your pads and traces at risk, and a board with a hardware fault has little margin left to absorb a mistake. The SC20 solves the problem inside the alloy itself. It mixes with the existing solder, turns the hard, oxidized layer into a softer alloy, and lets you clean the pad set at lower working temperatures. Lower heat means less thermal stress on the board and on the components that sit beside the CPU.

Pad damage rarely announces itself during cleaning. You notice a lifted pad or a torn trace only when the new chip refuses to boot, and by then the board needs a far longer repair. Softening the solder before you wick removes the two habits that cause most of that damage: dwelling too long with the iron and scrubbing the pads with force. You keep the iron moving, the wick does the work, and the pads come out bright and flat.

How CPU Pad Cleaning Solder Paste Fits Your Rework Workflow

Place the board on a PCB holder and remove the CPU with your hot air station. Dispense the SC20 paste onto the exposed pad set so it contacts the leftover factory solder. Bring your soldering station tip to the pads, let the paste blend with the old solder, then draw the softened alloy off with solder wick. Wipe the board with your usual cleaner and inspect the pad surface under a microscope. Flat, bright pads mean the footprint is ready for a new chip. A multimeter continuity check on the cleaned pads confirms you have not lifted a trace before you start reballing or fitting a replacement IC.

Technicians who chase a dead phone, a boot loop, or another hardware fault down to the processor end up at this step on every CPU replacement. The SC20 sits between chip removal and chip installation, so a reballing kit follows it in the sequence. Shops that handle several CPU jobs a week keep it at the bench next to the hot air station and the wick, because the cleanup stage decides whether the next stage succeeds.

Technical Highlights and Buying Considerations

2UUL positions the SC20 as a low-temperature solder paste for CPU pad cleaning on mobile phone motherboards, laptop boards, and other electronic circuit boards. The paste lowers the melting point of the factory solder it mixes with, helps you clear residual solder faster, and reduces the risk of overheating damage to the pads. Each unit weighs 17 g net, which keeps it easy to carry and store at a workshop bench.

The compatibility scope is universal rather than device-specific. The paste works on the solder sitting on the pads, so it fits CPU and BGA footprints on phone and laptop boards in general, and the listing makes no model-by-model support claim. Buyers building out a pad-cleaning setup can pair it with Soldering Stations, Hot Air Stations, Microscopes, PCB Holders, Multimeters, and Reballing Kits from the Mechanicpk catalog, which covers the full path from chip removal to chip installation.

Additional information
Weight0.17 kg
Q & A
Please login to post questions

Key Features

  • Low-temperature solder paste formulated for CPU pad cleaning
  • Mixes with factory lead-free solder to lower its melting point
  • Turns hard, oxidized solder into a softer alloy that flows into solder wick
  • Helps clear residual solder from pads faster
  • Reduces the risk of overheating damage to pads
  • Lets you work at lower temperatures with less thermal stress on nearby components
  • Leaves pads clean and flat for new IC installation
  • Compact 17 g net unit that stores easily at the bench

Specifications

Brand2UUL
ModelSC20
CategorySoldering Consumables – Low-Temperature Solder Paste
CompatibilityUniversal – mobile phone motherboards, laptop motherboards, and electronic circuit boards (CPU/BGA pads)
TechnologyLow-temperature solder paste that mixes with factory lead-free solder to lower its melting point
Dimensions174 x 52 x 19.5 mm (packaging)
Weight17 g net, 35 g gross

Common Repair Uses

  • Pad cleaning and pad preparation during CPU and BGA rework
  • Cleaning CPU pads after chip removal on phone motherboards
  • Softening hardened factory lead-free solder before wicking
  • Preparing BGA footprints for a new IC
  • Lowering iron heat during pad cleanup to reduce thermal stress
  • Clearing residual solder from laptop motherboard pads
  • Protecting pads and traces from lifting during cleanup
  • Pad prep before reballing
  • CPU replacement on boards with a dead phone or boot loop hardware fault

Compatible Devices

  • Universal scope – works on the solder on CPU/BGA pads, not tied to specific phone models
  • Mobile phone motherboards (brand-independent)
  • Laptop motherboards
  • General electronic circuit boards
  • CPU solder pads after chip removal
  • BGA footprints carrying factory lead-free solder
  • Pad sets prepared for new IC installation

FAQ

What is the product name?
The product name is 2UUL SC20 CPU Solder Melt for Easier CPU Pads Clean.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC20.
What is this product used for?
This product is used for lowering the melting point of factory solder on CPU pads so you can clean the pads easily during mobile phone and laptop repair.
Which devices are compatible with this product?
This product is compatible with mobile phone motherboards, laptop motherboards, and electronic circuit boards in general. It works on the solder on CPU and BGA pads and does not target specific phone models.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does 2UUL SC20 lower the melting point of lead-free solder on CPU pads?
Yes. The paste mixes with the existing factory lead-free solder on the pads and lowers the melting temperature of the combined alloy, so the solder softens at lower working heat.
Do I still need solder wick after applying 2UUL SC20 on CPU pads?
Yes. The paste softens the old solder, and you then draw the softened alloy off the pads with solder wick to leave them clean and flat for the new IC.