2UUL SC93 Tip Doctor Soldering Iron Tip Refresher 20g

₨ 600

Soldering Iron Tip Refresher

The 2UUL SC93 Tip Doctor is a 20 g soldering iron tip refresher cream that strips oxide from a hot tip and lets you re-tin it in one quick step. You restore solder wetting and heat transfer without replacing the tip, which keeps your soldering station performing consistently on charging issue, display problem, and dead phone repairs. The cream suits repair shops, service centers, and technicians who maintain several stations and want a fast, repeatable way to recover blackened tips before they cost you a clean joint.

In stock

18 People watching this product now!
Description

2UUL SC93 Tip Doctor: Soldering Iron Tip Refresher for Mobile Repair Benches

A tip that turns black and refuses solder slows every repair on your bench. The 2UUL SC93 Tip Doctor is a soldering iron tip refresher cream that strips oxide from a hot tip and lets you tin it again, so heat moves into the pad instead of stalling at a dull, insulating surface. This 20 g container suits technicians who run soldering stations all day on dead phone, charging issue, and display problem boards and want to recover a tip before they pay for a replacement.

How the SC93 Cream Brings Back a Tip

Oxidation builds a thin insulating layer on the iron plating. Solder then beads up and rolls off the tip, and the joint receives less heat than your station display suggests. The SC93 cream targets that layer directly. Distributor instructions give a working range of 300°C to 360°C. You heat the tip into that range, dip it into the cream for a few seconds, and watch the black residue lift as the tip turns silver. You then wipe the tip on a damp sponge or brass wire cleaner and apply fresh solder to tin it. Distributor listings describe this as a one-step revival, so you spend seconds at the bench instead of swapping a tip in the middle of a job. Repeat the cycle if the tip still wets poorly.

Where It Fits in Your Soldering and Rework Workflow

Tip condition decides how clean your joints come out before any other variable does. Run the SC93 routine at the start of a shift and again whenever solder stops wetting, then move on to the repair itself: IC replacement, jumper wire repair, charging port work, or flex connector rework. A properly tinned tip also helps when you level pads after reballing with your reballing kit, because heat transfers evenly and solder follows the tip instead of fighting it. Keep the cream next to your soldering station and hot air station so tip maintenance becomes part of your routine instead of a reaction to a ruined joint. Pair it with a microscope and a PCB holder, and you control the whole process from bench setup to final joint inspection. Then confirm the repair with a multimeter.

Choosing the SC93 for a Professional Repair Setup

The SC93 works on the iron tip, not on the phone, so it carries no device-specific limits. Distributor listings position it for soldering stations and electronic product repair, and one distributor names precision tips such as JBC C210 and T12 among the tips it helps. 2UUL does not publish a tip-by-tip compatibility chart, so check the condition of your own tips before you rely on it. A tip with plating that has worn through needs replacement, and the cream cannot fix that. For shops that burn through tips quickly, a small 20 g container works as a low-cost first step before you invest in higher-grade soldering stations and tip sets. Distributor pages also describe the formula as environmentally friendly and free of harmful substances, though the full composition is not published.

Mechanicpk supplies the 2UUL SC93 Tip Doctor to technicians, repair shops, and service centers across Pakistan. If you maintain several benches, stock one container per station so no technician waits on a shared tin.

Additional information
Weight0.20 kg
Q & A
Please login to post questions

Key Features

  • Removes the oxide layer that stops solder from sticking to the tip
  • Restores solder wetting and heat transfer on a dull or blackened tip
  • Revives the tip in one dip-and-wipe step
  • Re-tins the tip after cleaning
  • Works in a 300°C to 360°C tip temperature range per distributor instructions
  • Extends usable tip life and reduces how often you replace tips
  • Universal use across soldering iron tips and stations
  • Compact 20 g container that fits any repair bench

Specifications

Brand2UUL
ModelSC93 Tip Doctor
CategorySoldering Tools – Soldering Iron Tip Refresher Cream
CompatibilityUniversal – oxidized soldering iron tips (not device-specific)
Weight20 g (net)

Common Repair Uses

  • Tip recovery and re-tinning before and during soldering and rework
  • Removing the black oxide layer from a tip that stopped accepting solder
  • Re-tinning a tip before IC replacement on a dead phone board
  • Restoring heat transfer before charging port or flex connector soldering
  • Preparing the tip for jumper wire repair on damaged PCB traces
  • Recovering a tip before pad leveling after reballing
  • Daily start-of-shift tip maintenance on repair benches
  • Maintaining precision tips so you replace them less often

Compatible Devices

  • Universal – works on the soldering iron tip, not on specific phone models
  • Oxidized soldering iron tips (universal scope)
  • Precision station tips such as JBC C210 (named by a distributor)
  • T12-type soldering tips (named by a distributor)
  • Soldering iron tips on mobile repair soldering stations
  • Hand soldering irons used for PCB and electronics repair

FAQ

What is the product name?
The product name is 2UUL SC93 Tip Doctor.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC93.
What is this product used for?
This product is used for removing oxidation from soldering iron tips and re-tinning them so solder flows and heat transfers properly again.
Which devices are compatible with this product?
This product is compatible with oxidized soldering iron tips in general. It treats the tip, not the phone, so it has no device-specific limits.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
What temperature should I use with the 2UUL SC93 Tip Doctor?
Distributor instructions give a working range of 300°C to 360°C. Heat the tip into that range, dip it into the cream for a few seconds, wipe it on a damp sponge or brass wire cleaner, then apply fresh solder.
Can the SC93 Tip Doctor revive C210 and T12 soldering tips?
One distributor names precision tips such as JBC C210 and T12 among the tips it helps. 2UUL does not publish a tip-by-tip compatibility list, and a tip with worn-through plating needs replacement instead of cleaning.