Relife RL-044 XM11 BGA Stencil for Xiaomi SM6125
₨ 599
XM11 BGA Reballing Stencil
The Relife RL-044 XM11 BGA stencil gives your repair bench a dedicated 0.12 mm steel reballing plate for Xiaomi and Redmi boards running Qualcomm Snapdragon 665 (SM6125) or Snapdragon 710 (SDM710) processors. It covers CPU reballing on Redmi Note 8, Mi CC9, Mi CC9E, Mi 8 SE and Mi A3 boards, so you can tackle a dead phone, hang on logo or boot loop issue that traces back to a lifted or damaged CPU joint. Footprint-matched holes help you place consistent solder balls after every CPU removal. Mechanicpk offers the XM11 plate to Pakistani technicians, repair shops and service centers that want exact-fit stencils instead of universal sheets.
In stock
Relife RL-044 XM11 BGA Stencil for Snapdragon 665 and 710 Xiaomi Boards
The Relife RL-044 XM11 BGA stencil gives you one dedicated reballing plate for Xiaomi and Redmi boards built on the Qualcomm Snapdragon 665 (SM6125) and Snapdragon 710 (SDM710) platforms. Relife numbers every plate in the RL-044 range by chip footprint, so XM11 matches a specific ball layout instead of acting as a loose universal template. If your bench handles Redmi Note 8, Mi CC9, Mi CC9E, Mi 8 SE or Mi A3 boards, this plate covers the CPU reball step on those platforms. Mechanicpk offers it to Pakistani repair shops that want exact-fit stencils for repeat Xiaomi jobs.
Footprint-Matched Holes in 0.12 mm Steel
Relife builds the XM11 plate from 0.12 mm steel and cuts its holes to follow the ball layout of the target chip. That thickness controls how much solder each aperture holds, so you get even ball height across the whole array when you spread paste or drop pre-made balls. Steel keeps its flat shape under hot air, and a flat plate sits tight against the pads, which stops paste from bleeding under the stencil and bridging neighbouring balls. Clean the pads, align the plate under magnification, and hold it steady before you spread paste. A plate that shifts mid-job ruins the whole array, so pair it with a PCB holder.
Where XM11 Sits in the CPU Reballing Workflow
A Xiaomi board that arrives as a dead phone, hangs on logo or loops at boot after a drop often points to a hardware fault at the CPU joints. You confirm the fault first: check the main rails with a multimeter, then lift the CPU with a hot air station set to a controlled profile. Next you clear old solder from the pads with a soldering station and wick, add flux, and lay the XM11 plate over the pads. You fill the apertures, lift the plate, reflow the balls, and seat the CPU back on the board. Your microscope shows whether every ball formed before you commit to the final reflow. Technicians who reball Snapdragon 665 and 710 boards regularly keep XM11 beside their other reballing kits, so the right plate comes out in seconds instead of after a search through a mixed pile.
Confirm the Chipset Before You Order
Phone names mislead here. Redmi Note 8 runs the Snapdragon 665, but Redmi Note 8 Pro runs a MediaTek Helio G90T, a different chip family that XM11 does not target. Read the CPU marking on the board, then match it to SM6125 or SDM710 before you buy. This habit saves you from ordering plates that never seat on the pads. When your shop works across several Xiaomi platforms, add the neighbouring RL-044 plates over time and label each one with its XM number.
Why Repair Shops Keep XM11 in the Drawer
If Redmi and Mi phones reach your bench regularly, Snapdragon 665 and 710 boards that arrive as a dead phone or boot loop issue often trace back to the CPU joints. A dedicated plate turns CPU reballing into a repeatable step: the same footprint, the same ball spread, the same result on the tenth board as on the first. You spend less time re-measuring pads, and fewer boards go back on the shelf after a failed reflow. The plate also suits training benches, where students practise alignment on a footprint that real customer boards use. Pair XM11 with a stable hot air station, a soldering station and a microscope, and your bench handles Snapdragon 665 and 710 CPU work from lift to final reflow.
| Weight | 0.1 kg |
|---|
Key Features
- ✓0.12 mm steel plate for even solder ball height
- ✓Footprint-matched holes cut to the target chip’s ball layout
- ✓Targets Qualcomm Snapdragon 665 (SM6125) CPUs
- ✓Targets Qualcomm Snapdragon 710 (SDM710) CPUs
- ✓Numbered XM11 plate in Relife’s RL-044 series for fast identification
- ✓Covers Redmi Note 8, Mi CC9, Mi CC9E, Mi 8 SE and Mi A3 boards
- ✓Reusable steel plate for repeat reballing jobs
Specifications
| Brand | Relife |
|---|---|
| Model | RL-044 XM11 |
| Category | BGA Reballing Stencil |
| Compatibility | Xiaomi and Redmi boards with Qualcomm Snapdragon 665 (SM6125) and Snapdragon 710 (SDM710) CPUs |
| Supported Devices | Redmi Note 8, Mi CC9, Mi CC9E, Mi 8 SE, Mi A3 |
| Technology | BGA reballing stencil, 0.12 mm thickness |
| Material | Steel |
Common Repair Uses
- ✓CPU reballing on Xiaomi and Redmi Snapdragon 665 and 710 boards
- ✓Reballing a CPU after removal with a hot air station
- ✓Fixing a dead phone caused by lifted or damaged CPU solder joints
- ✓Repairing hang on logo and boot loop issues linked to a hardware fault at the CPU
- ✓Re-placing solder balls on cleaned CPU pads before reflow
- ✓Board-level CPU rework on Redmi Note 8 and Mi A3 units
- ✓Board-level CPU rework on Mi CC9, Mi CC9E and Mi 8 SE units
- ✓Training benches that practise CPU reball alignment
Compatible Devices
- ✓Xiaomi and Redmi boards on the Snapdragon 665 (SM6125) and Snapdragon 710 (SDM710) platforms
- ✓Redmi Note 8
- ✓Xiaomi Mi CC9
- ✓Xiaomi Mi CC9E
- ✓Xiaomi Mi 8 SE
- ✓Xiaomi Mi A3
- ✓Qualcomm Snapdragon 665 SM6125 CPU
- ✓Qualcomm Snapdragon 710 SDM710 CPU
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which chipsets does the Relife RL-044 XM11 stencil support?
Does the XM11 stencil fit the Redmi Note 8 Pro?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
RELIFE RL-004SA silicone pad – Anti-slip
In stock



