Relife RL-044 XM9 Stencil for Snapdragon 845/710
₨ 599
SDM845 Reballing Stencil for Xiaomi
The Relife RL-044 XM9 Stencil gives your bench a dedicated 0.12 mm steel reballing pattern for Qualcomm Snapdragon 845 (SDM845) and Snapdragon 710 (SDM710) processors. You use it on Xiaomi Mi 8, Mi 8 SE and Mi MIX 2S boards to restore solder balls after CPU removal, so your reflowed chip seats flat on clean, even joints. Relife places XM9 in its RL-044 Xiaomi series, which assigns one stencil to each chipset family for accurate pad alignment. Technicians and repair shops in Pakistan choose it for dead phone, hang on logo and hardware fault repairs that need precise CPU reballing.
In stock
Relife RL-044 XM9 Stencil: SDM845 Reballing Stencil for Xiaomi Boards
The Relife RL-044 XM9 Stencil targets the Snapdragon 845 (SDM845) and Snapdragon 710 (SDM710) CPU footprints found on Xiaomi Mi 8, Mi 8 SE and Mi MIX 2S motherboards. If your workshop reballs Xiaomi processors, this SDM845 reballing stencil gives you a dedicated pattern for restoring solder balls after you lift the chip. Relife places it in the Xiaomi XM series of the RL-044 range, where each numbered stencil serves one chipset family instead of trying to cover every board. That focus keeps your ball placement matched to the pad field you actually work on.
Chipset Coverage and Stencil Design
The XM9 pattern covers two Qualcomm chip families: Snapdragon 845 (SDM845) and Snapdragon 710 (SDM710). Relife cuts the stencil from 0.12 mm steel, a thickness that suits fine-pitch phone CPU work, where ball height and consistency decide whether a reflowed processor sits flat. You apply paste or place balls through the apertures, lift the stencil, and reflow with hot air, so aperture accuracy sets the quality of every joint under the chip. The wider RL-044 series uses round and square aperture layouts and high-temperature-resistant steel, which lets different tin planting methods work across the family. Check the marking on the CPU you removed before you start, because the pattern follows the chipset, not the phone name.
Where It Fits in a Xiaomi Repair Workflow
Reballing sits in the middle of board-level CPU work. You remove the processor with a hot air station, clean the pads with flux and wick on a soldering station, inspect the pad field under a microscope, then reball and refit. The XM9 stencil handles the reball step for Snapdragon 845 and 710 Xiaomi boards. Technicians reach for it on dead phone cases where a CPU joint failed, on boot loop issue and hang on logo boards after they rule out software with a flash tool, and on boards where earlier rework left uneven balls. Clamp the board in a PCB holder, align the stencil to the pads under magnification, and keep it flat while you work. Check continuity around the CPU area with a multimeter before the final reflow. If the phone still shows a hardware fault after reballing, move on to ISP pinout and eMMC checks with your programmer and test box.
Choosing XM9 Against Other RL-044 Xiaomi Stencils
Relife numbers its Xiaomi stencils by chipset generation, so the right pick starts with the processor. XM9 covers Snapdragon 845 and 710. XM10 covers Snapdragon 855 (SM8150) and 730 (SM7150) boards such as the Mi 9 and Redmi K20 series. XM12 covers Snapdragon 865 (SM8250) for the Mi 10 family, and XM14 covers Snapdragon 888 (SM8350) for the Mi 11 family. Buy XM9 on its own when Mi 8 and Mix 2S boards reach your bench regularly. Consider the full Relife RL-044 Xiaomi set when your shop works across several Xiaomi generations. Pair the stencil with a reballing kit that includes balls, flux and tweezers, so your first job does not stall for missing consumables.
| Weight | 0.1 kg |
|---|
Key Features
- ✓0.12 mm steel stencil thickness
- ✓Dedicated pattern for Snapdragon 845 (SDM845) and 710 (SDM710) CPUs
- ✓Matches Xiaomi Mi 8, Mi 8 SE and Mi MIX 2S boards
- ✓Part of the Relife RL-044 Xiaomi XM series
- ✓Round and square aperture layouts across the RL-044 range
- ✓High-temperature-resistant steel suited to hot air reflow
- ✓Single-chipset focus reduces pattern mismatch on Xiaomi reball jobs
- ✓Supports a tin planting workflow on CPU pads
Specifications
| Brand | Relife |
|---|---|
| Model | RL-044 XM9 |
| Category | BGA Reballing Stencil |
| Compatibility | Qualcomm Snapdragon 845 (SDM845) and Snapdragon 710 (SDM710) CPUs |
| Supported Devices | Xiaomi Mi 8, Mi 8 SE, Mi MIX 2S |
| Technology | BGA tin planting (solder ball placement) |
| Material | Steel |
| Thickness | 0.12 mm |
Common Repair Uses
- ✓CPU-level reballing on Xiaomi Snapdragon 845/710 boards
- ✓Reballing an SDM845 or SDM710 CPU after hot air removal
- ✓Restoring solder balls on a CPU lifted during a dead phone repair
- ✓Refreshing uneven balls left by earlier rework
- ✓Rework on boards with a hardware fault traced to CPU solder joints
- ✓Re-tinning a cleaned CPU before refitting it on a Xiaomi board
- ✓Board-level CPU service for Mi 8, Mi 8 SE and Mi MIX 2S units
Compatible Devices
- ✓Chipset-family scope as listed for the XM9 stencil
- ✓Xiaomi Mi 8
- ✓Xiaomi Mi 8 SE
- ✓Xiaomi Mi MIX 2S
- ✓Qualcomm Snapdragon 845 (SDM845) CPU
- ✓Qualcomm Snapdragon 710 (SDM710) CPU
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which Qualcomm chipsets does the Relife RL-044 XM9 stencil support?
Is XM9 the right stencil for Snapdragon 855 boards like the Mi 9 or Redmi K20?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



