Qianli Bumblebee QS46 SAM7 BGA Stencil – Samsung A9/C9
₨ 900 Original price was: ₨ 900.₨ 600Current price is: ₨ 600.
Qianli QS46 Stencil for Samsung MSM8976
The Qianli Bumblebee QS46 SAM7 is a square-hole, round-angle BGA reballing stencil built for the MSM8976 CPU on Samsung A9 and C9 series boards (A9000, A9100, C9000). Qianli’s Bumblebee build stays sturdy and precise across repeated reball jobs, and the newer treatment and materials make it easier to handle on the bench. You use it after CPU removal to lay a clean, even ball pattern before reflow, whether you are fixing a dead phone, a hang on logo or a boot loop issue caused by failed CPU joints. Mechanicpk supplies it in Pakistan as a single stencil, ready to pair with your hot air station and reballing kit.
In stock
Qianli QS46 BGA Reballing Stencil for Samsung A9/C9 MSM8976 Boards
The Qianli QS46 BGA reballing stencil, sold as Bumblebee QS46 SAM7, does one job: it reballs the MSM8976 CPU on Samsung A9 and C9 series boards. It covers the A9000, A9100 and C9000. When your bench sees Samsung motherboards with a lifted, swapped or reflowed processor, this stencil gives you a dedicated MSM8976 pattern instead of a multi-purpose plate you align by eye. Mechanicpk stocks it as a single-piece consumable for Pakistani repair shops that run steady Samsung CPU work.
Stencil Design and Build Quality
Qianli builds the Bumblebee range with square holes and rounded angles. The square opening lets paste or solder balls settle fully onto each pad, and the rounded corners help the stencil release from the CPU surface without smearing the deposit. Qianli positions the current Bumblebee generation as sturdy, precise over repeated use, and easier to handle thanks to a newer treatment and new materials. That matters when you reball several boards a week and need the stencil to hold its shape after every cycle.
The QS46 belongs to Qianli’s CPU Universal Series naming. Order it by the QS46 model number so you do not mix it up with neighbouring Samsung stencils such as the QS47 for Exynos 3471, 7580 and 7880 boards or the QS48 for the Exynos 7420. Each of those targets a different processor, and a wrong stencil wastes a CPU.
Where It Fits in Your Samsung CPU Reball Workflow
You reach for the QS46 after you lift the MSM8976 with a hot air station and clear the board. Wick the old solder off the pads with a soldering station, inspect the pad surface under a microscope, and lock the board into a PCB holder so it stays put. Then align the stencil over the pads, apply paste or place balls from your reballing kit, and reflow the CPU back onto the board. Before you close the phone, check continuity with a multimeter and power the board on your test box or bench supply.
Keep the stencil flat against the CPU while you work, and clean it with flux remover after each job so leftover paste does not clog the openings. Every step in that chain uses a standard repair bench tool. The stencil is the part that fixes the ball pattern, so a clean, flat stencil decides whether the CPU lands with even joints or leaves you chasing a second reflow.
Repair Problems This Stencil Helps You Solve
CPU reballing makes sense once diagnosis points at failed solder joints under the processor. Typical cases on Samsung boards include a dead phone after a drop, a hang on logo, or a boot loop issue that survives a clean flash. Technicians doing IC change karna on A9 or C9 boards also need a fresh ball set on the replacement CPU, and this stencil gives that step a repeatable pattern.
Run your software checks first. Reflash, test the battery and charging path, and rule out a software marna situation before you lift a healthy CPU. Once the fault sits in the hardware, the QS46 saves you from improvising a ball layout.
Building Your Reball Setup
The pack contains one stencil, which keeps your cost per reball job low and makes it easy to stock a spare for each bench. Pair it with a hot air station, soldering station and reballing kit from Mechanicpk to finish a CPU job from a single order. If your bench later moves beyond Samsung MSM8976 work, step up to a multi-function Qianli stencil that covers several pitches, and keep the QS46 for the boards that need an exact match.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Dedicated QS46 pattern for the Samsung A9/C9 MSM8976 CPU
- ✓Square holes with rounded angles for clean ball and paste deposit
- ✓Sturdy build that holds precision over repeated reball jobs
- ✓Newer treatment and materials for easier handling
- ✓Part of the Qianli Bumblebee stencil range
- ✓Supports CPU reballing after lift, swap or reflow
- ✓Single stencil per pack
- ✓Fits a standard bench setup with hot air station, soldering station and reballing kit
Specifications
| Brand | Qianli |
|---|---|
| Model | QS46 (SAM7) |
| Category | BGA Reballing Stencil (Bumblebee Series) |
| Compatibility | Samsung A9 / C9 series (A9000, A9100, C9000), MSM8976 CPU |
| Supported Devices | Samsung A9000, A9100, C9000 |
| Technology | Square holes, round angle BGA stencil |
Common Repair Uses
- ✓MSM8976 CPU reballing on Samsung A9/C9 boards
- ✓Reballing the MSM8976 CPU after removal
- ✓Preparing a fresh ball set on a replacement CPU
- ✓Reflow rework after a lifted or cold-jointed CPU
- ✓Repairing a dead phone caused by failed CPU solder joints
- ✓Fixing hang on logo or boot loop issue traced to CPU joints
- ✓BGA reballing practice and technician training
Compatible Devices
- ✓Samsung A9/C9 series boards with the MSM8976 CPU
- ✓Samsung A9 (A9000)
- ✓Samsung A9 (A9100)
- ✓Samsung C9 (C9000)
- ✓Boards carrying the Qualcomm MSM8976 CPU (QS46 pattern)
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Which Samsung models does the Qianli QS46 stencil support?
Can I use the QS46 stencil on Exynos Samsung boards?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



