2UUL SC11 EcoFlux Solder Flux 10cc for PCB Repair

₨ 999

Lead-Free No-Clean Flux for PCB Repair

The 2UUL SC11 EcoFlux solder flux gives your bench a lead-free, RoHS-compliant flux in a 10cc syringe with two nozzle tips. It promotes smooth solder flow on BGA, PGA and SMD work, limits oxidation while the joint heats, and leaves minimal residue after rework. You dispense a controlled bead onto mobile phone PCBs, tablet boards and general circuit boards, whether you handle IC change karna jobs, reballing or pad repair. The low-fume formula keeps your workspace cleaner during long rework sessions, and the transparent finish lets you see pad edges clearly. Pair it with your hot air station and soldering station for consistent joints.

In stock

14 People watching this product now!
Description

2UUL SC11 EcoFlux Solder Flux: Technical Overview for Mobile Repair Benches

The 2UUL SC11 EcoFlux solder flux is a lead-free, no-clean flux built for precision rework on mobile phone motherboards and general PCBs. 2UUL packs it in a 10cc syringe with fine nozzles, so you place a controlled bead on the pad instead of flooding the board. The formula complies with RoHS safety standards, promotes smooth solder flow and limits oxidation while the joint heats. If you run a repair shop or service center, this flux gives your bench a dependable consumable for daily BGA, PGA and SMD jobs.

Formulation and Packaging Specifications

The SC11 uses a transparent, lead-free formula, so you keep a clear view of pad edges and ball alignment under your microscope. Its no-clean chemistry leaves minimal, non-corrosive residue. You can still wipe the board if you want a spotless finish before reassembly. The low-fume formula produces less smoke during heating, which helps in a workshop where several technicians share one bench area. The 10cc syringe includes two interchangeable nozzle tips, so you switch between fine pad work and wider coverage without changing products. The syringe also stores easily in a tool drawer next to your soldering station and hot air station.

Where SC11 Fits in Your Repair Workflow

You reach for flux at the start of almost every board-level job, and SC11 covers the main ones. During IC change karna work on a dead phone, a thin layer under the chip helps solder wet the pads as you lift and replace the component. In reballing, the flux helps solder balls adhere to cleaned pads before you reflow with your hot air station. For SMD rework such as charging port circuits, small passives and jumper lagana on broken tracks, it helps solder wet the copper cleanly. You also use it on tablet and laptop boards, where reliable joints matter more than speed. Add a reballing kit, a PCB holder and a microscope to the same bench, and the flux ties each step of the rework together.

Why Technicians Pick SC11 for Daily Rework

Repair shops in Pakistan go through flux quickly, so a syringe that dispenses accurately matters as much as the chemistry. SC11 pairs a no-clean formula with fast activation, so solder starts flowing as soon as the joint reaches working temperature. Start with a small bead, spread it with the nozzle, and add more only where the joint needs it. You waste less flux and finish hardware fault repairs with tidy joints. The lead-free, low-fume formulation also suits shops that want a safer workspace for staff. The flux is universal and not tied to one phone brand or chipset, so one syringe serves iPhone and Android boards alike.

Additional information
Weight0.05 kg
Q & A
Please login to post questions

Key Features

  • Lead-free, RoHS-compliant formula
  • No-clean chemistry with minimal residue
  • Transparent flux for clear pad visibility
  • Promotes smooth, reliable solder flow
  • Limits oxidation during soldering
  • Low-fume formula for a cleaner workspace
  • 10cc syringe with two interchangeable nozzle tips
  • Suits BGA, PGA and SMD rework

Specifications

Brand2UUL
ModelSC11 EcoFlux
CategorySolder Flux (10cc syringe)
CompatibilityUniversal — BGA, PGA and SMD soldering on PCBs
TechnologyLead-free, no-clean, RoHS-compliant solder flux

Common Repair Uses

  • Real-world rework tasks for this flux.
  • IC change karna on dead phones
  • BGA reballing
  • SMD component rework
  • Mobile phone PCB soldering
  • Jumper lagana on damaged tracks
  • Charging port circuit repair
  • Pad and joint touch-up
  • Micro-soldering on circuit boards

Compatible Devices

  • Universal flux — not device-specific. It works across the board types below.
  • Android phone motherboards
  • iPhone motherboards
  • Tablet circuit boards
  • Laptop and computer boards
  • BGA ICs
  • PGA components
  • SMD components
  • General electronic PCBs

FAQ

What is the product name?
The product name is 2UUL SC11 EcoFlux Solder Flux 10cc.
What is the brand of this product?
The brand of this product is 2UUL.
What is the model of this product?
The model of this product is SC11 EcoFlux.
What is this product used for?
This product is used for soldering, reballing and rework on mobile phone PCBs and other circuit boards.
Which devices are compatible with this product?
This product is a universal flux for BGA, PGA and SMD soldering, so it works on mobile phone, tablet and general electronic boards.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Do I need to clean the board after using SC11 flux?
No. SC11 is a no-clean flux that leaves minimal, non-corrosive residue. You can still wipe the board if you want a cleaner finish.
Can I use SC11 flux for BGA reballing and IC change karna?
Yes. The flux is made for BGA, PGA and SMD soldering. It helps solder balls adhere to pads during reballing and helps solder flow during IC rework.