2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar
₨ 900
Gold Plated FPC Connector Reballing Bars
The 2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar pack gives you five ball head bars for tinning the pads of flat flexible connectors on phone motherboards. The rounded tip, which the manufacturer designs to resist scratching the board, lets you drag solder across fine connector pads in tight spaces. Gold plating supports fast tinning, and the replaceable format means you swap in a fresh bar when one wears out. Technicians use it for display, battery, and charging flex connector repair after they clean or replace a connector. The pack ships without a handle. Order it from Mechanicpk for your repair bench in Pakistan.
Out of stock
FPC Connector Reballing Solder Bar for Precision Connector Tinning
The 2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar gives technicians a purpose-built FPC connector reballing solder bar for one of the most delicate jobs on a phone motherboard: rebuilding solder on the pads of a flat flexible connector. Each pack contains five gold plated bars with a ball head design, so you keep spares on the bench and swap in a fresh bar the moment one wears down. Mechanicpk stocks the SC96 for workshops that repair display, battery, and charging flex connectors every day and want a dedicated consumable for the tinning step.
How the Ball Head Bar Tins Fine Connector Pads
An FPC connector sits on pads with very little spacing, and a sharp tool edge can scratch a pad or the board surface around it. The SC96 uses a rounded ball head, and the manufacturer positions that shape as safer on the board and less prone to scratching than other bar designs. You load solder onto the bar, drag it across the connector pads, and pull the solder along the row until the pads carry an even layer. The gold plating supports fast tinning, and the slim bar format reaches into tight spaces where a conventional iron tip crowds neighboring components. Pair the bar with quality flux, solder paste, a temperature-controlled soldering station, and a microscope so you can judge every pad before you refit the connector. Work with a steady hand and moderate heat, because overheating a pad lifts it from the board and turns a simple tinning job into a trace repair. Clean old solder and flux residue off the pads first, then tin them in one smooth pass so you avoid bridges between neighboring contacts.
Where the SC96 Fits in Your Repair Workflow
FPC connector faults show up as display problems, charging issues, and other hardware faults that trace back to a damaged or lifted connector. When you remove a bad connector or clean lifted pads, those pads need fresh solder before the new connector goes on. The SC96 covers that tinning step: you clean the pads, tin them with the bar, and then place the replacement connector with a hot air station or a soldering iron. Technicians who rework connectors alongside multimeters, test boxes, and PCB holders keep the bars in the same drawer as their reballing kits, so the whole connector job stays at one bench position. A shop that handles many flex cable replacements per week also benefits from the five-bar count, since each bar stays on the bench for a specific job type instead of crossing between display, battery, and dock connector work. Once a dead phone powers up again, the same workflow can continue into software work with ISP pinout tools, eMMC programmers, and UFS adapters.
The pack ships without a handle. Check how you plan to hold the bars before you order, because the handle-equipped version of this series sells as a separate model, the SC98.
Why Buyers Specify the SC96 for Connector Work
Buyers who already know the category choose the SC96 for three reasons: the five-bar pack, the gold plated ball head, and the focus on FPC connector tinning instead of general soldering. A single-purpose consumable keeps your general soldering tips free for other jobs and gives each connector repair a clean, dedicated tool. The pack suits shops that process high volumes of screen and charging flex repairs, and it suits training institutes that want each student to work with a dedicated bar. Mechanicpk supplies connector tinning tools, reballing accessories, and soldering equipment for repair shops and service centers across Pakistan, so you can build the full connector rework station from one catalog. If you run a workshop in Lahore, Karachi, or Islamabad and you reorder consumables on a schedule, the SC96 pack fits straight into that routine.
| Weight | 0.3 kg |
|---|
Key Features
- ✓Five replaceable bars in one pack
- ✓Gold plated bar construction for fast tinning
- ✓Ball head design that resists scratching the board
- ✓Drag-tin format built for FPC connector pads
- ✓Reaches pads in confined spaces
- ✓Supports FPC connector reballing and tin suction desoldering repair
- ✓Sold without a handle, so you choose your own holding method
- ✓Works as a dedicated consumable alongside soldering stations and hot air stations
Specifications
| Brand Entity | 2UUL |
|---|---|
| Product Entity | 2UUL SC96 Gold Plated FPC Connector Reballing Solder Bar |
| Technology Entity | Gold plated ball head drag-tin bar |
| Compatible Device Entities | Mobile phone motherboards with FPC connectors (universal) |
| Repair Process Entity | FPC connector reballing and pad tinning |
| Industry Entity | Mobile phone repair, PCB rework |
Common Repair Uses
- ✓Pad tinning and reballing for FPC connector replacement on mobile boards.
- ✓FPC connector reballing
- ✓Tin suction desoldering repair
- ✓Re-tinning pads after you remove a damaged connector
- ✓Display connector repair
- ✓Charging dock connector repair
- ✓Battery connector repair
- ✓Preparing lifted or worn pads before you fit a new connector
- ✓Fine-pitch connector pad touch-up during board rework
Compatible Devices
- ✓Universal. The bars suit FPC connector pads and are not device-specific.
- ✓Universal, not tied to a phone brand or chipset
- ✓FPC connector pads on mobile phone motherboards
- ✓Display flex connector pads
- ✓Battery flex connector pads
- ✓Charging dock FPC connector pads
- ✓Other flex cable connector pads on mobile logic boards
- ✓Small electronics PCBs that use FPC connectors
- ✓Any repair that needs fresh tin on fine-pitch connector pads
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the 2UUL SC96 come with a handle?
Why does the SC96 use a ball head tip?
Related products
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



