Amaoe MQ5 Stencil – Qualcomm MTK CPU BGA Reballing

₨ 1

Amaoe MQ5 Reballing Stencil for Qualcomm and MTK CPU

The Amaoe MQ5 Stencil gives your repair bench a 0.12 mm BGA reballing template for a defined chip group: MT6895Z/MT8795Z, MT6983Z, MT8176V, SM8475, SM6225, SM7450, SM8550 and RAM496. Square round holes drop solder balls into place, and the deformation-resistant material keeps the pattern flat during hot air reflow. Use it after you lift a CPU or RAM chip from a dead phone or a board with a hardware fault, then reball, clean and refit. Mechanicpk supplies it to Pakistani repair shops and service centers that work at chip level.

Out of stock

13 People watching this product now!
Description

Amaoe MQ5 BGA Reballing Stencil for Qualcomm and MediaTek Rework

The Amaoe MQ5 BGA reballing stencil gives technicians a 0.12 mm template for Qualcomm and MediaTek chip rework at board level. The MQ5 layout matches a defined chip list: MT6895Z/MT8795Z, MT6983Z, MT8176V, SM8475, SM6225, SM7450, SM8550 and RAM496. You align it over the chip, press solder balls through its square round holes and reflow a clean ball array in one pass. When a dead phone, a boot loop issue or a hang on logo fault traces back to weak joints under the processor, this stencil handles the reballing step so the chip returns to the board with fresh, even balls.

Where the MQ5 Fits in Your Reballing Workflow

Reballing starts after chip removal. You lift the CPU or RAM chip with a hot air station, clear old solder from the chip and board pads with a soldering station, then apply flux and seat the stencil over the chip. The MQ5 holds the ball pattern steady while you fill the openings and heat the balls until they fuse. You peel the template away, check the array under a microscope and refit the chip. A stencil covers only the ball-forming job, so the rest of your bench carries the result. A PCB holder keeps the board still during rework, a reballing kit supplies solder balls and flux, and a multimeter confirms there are no shorts on the power lines before and after the refit. Work one chip at a time and keep the stencil flat against the chip surface, because a gap lets balls roll under the template and bridge neighboring pads. Clean the stencil between uses so leftover flux does not clog the holes.

MQ5 Chip Coverage and Stencil Build

Amaoe sells this range as six numbered stencils, MQ1 through MQ6, and each number maps to its own chip group. The MQ5 group mixes MediaTek and Qualcomm parts: MT6895Z/MT8795Z, MT6983Z and MT8176V on the MediaTek side, with SM8475, SM6225, SM7450, SM8550 and RAM496 listed alongside them. Match your chip marking against this list before you order, because a stencil from a neighboring number carries a different hole layout. If your chip is not on the list, check the other MQ numbers instead of forcing a fit. The supplier specifies a 0.12 mm thickness, a square round hole shape, precise pin location and deformation-resistant material. Those four points decide how evenly the balls seat and how flat the template stays under repeated heat. Label your stencil drawer by MQ number and chip group so you pull the right template without trial fitting.

Why Workshops Stock the Amaoe MQ5 Stencil

A shop that reballs CPU and RAM chips every week needs a template on hand for each chip group, not one universal sheet. The MQ5 covers the group above, so you pick it up when the chip on your bench matches the list and skip trial-fitting other stencils. Mechanicpk supplies it to repair shops, service centers and training institutes across Pakistan that work at IC level. Once the processor side is done, your next steps stay inside the same toolset: eMMC programmers, UFS adapters and ISP pinout tools handle storage work, and test boxes cover the software side after the hardware repair. Pair the stencil with the hot air station and soldering station you already run, and add a microscope if you inspect ball quality before refitting. Keep the MQ5 as your standard template for this chip group and your reballing results stay consistent from one board to the next.

Additional information
Weight0.1 kg
Q & A
Please login to post questions

Key Features

  • 0.12 mm thickness for BGA reballing of CPU and RAM chips
  • Covers MT6895Z/MT8795Z, MT6983Z, MT8176V, SM8475, SM6225, SM7450, SM8550 and RAM496
  • Square round hole shape for solder ball placement
  • Precise pin location across the ball pattern
  • Deformation-resistant material for stable use under heat
  • Mixed Qualcomm and MediaTek coverage in one numbered template
  • Part of the Amaoe MQ1 to MQ6 numbered stencil range
  • Fits a standard bench setup with hot air station, flux and reballing kit

Specifications

BrandAmaoe
ModelMQ5
CategoryBGA Reballing Stencil
CompatibilityMT6895Z/MT8795Z, MT6983Z, MT8176V, SM8475, SM6225, SM7450, SM8550, RAM496
Technology0.12 mm BGA reballing template with square round holes and precise pin location
MaterialDeformation-resistant stencil material

Common Repair Uses

  • BGA reballing of the listed CPU and RAM chips
  • Reballing a CPU after hot air removal from the board
  • Reballing a RAM chip during IC-level rework
  • Rebuilding a ball array on a chip that came off a dead phone
  • Reballing a processor on a board with a boot loop issue traced to weak joints
  • Reballing a chip on a board that hangs on logo after a hardware fault
  • Refreshing solder balls before refitting a removed chip
  • Replacing damaged or lost balls on a chip after pad cleaning
  • Training bench practice for reballing technique at repair institutes

Compatible Devices

  • Chipset-family scope (Qualcomm and MediaTek CPU/RAM chips on the MQ5 list; not a phone-model list)
  • MediaTek MT6895Z / MT8795Z
  • MediaTek MT6983Z
  • MediaTek MT8176V
  • Qualcomm SM8475
  • Qualcomm SM6225
  • Qualcomm SM7450
  • Qualcomm SM8550
  • RAM496

FAQ

What is the product name?
The product name is Amaoe MQ5 Stencil.
What is the brand of this product?
The brand of this product is Amaoe.
What is the model of this product?
The model of this product is MQ5.
What is this product used for?
This product is used for BGA reballing of CPU and RAM chips on the MQ5 chip list, using solder balls and hot air reflow.
Which devices are compatible with this product?
This product matches the chip group MT6895Z/MT8795Z, MT6983Z, MT8176V, SM8475, SM6225, SM7450, SM8550 and RAM496. Compatibility depends on the chip, not on the phone model.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the Amaoe MQ5 stencil cover both Qualcomm and MediaTek chips?
Yes. The MQ5 chip list includes MediaTek MT6895Z/MT8795Z, MT6983Z and MT8176V, and Qualcomm SM8475, SM6225, SM7450 and SM8550, plus RAM496.
What thickness and hole shape does the Amaoe MQ5 stencil use?
The supplier lists the MQ5 as a 0.12 mm stencil with square round holes and precise pin location.