MaAnt HT-C210 Solder Iron – C210 Soldering Station

₨ 1

C210 Soldering Station for Mobile Repair

The MaAnt HT-C210 Solder Iron gives your bench a precision C210 soldering station built for phone, tablet and laptop board work. A 72W heating core inside the cartridge tip reaches temperature fast, and key control covers 30°C to 500°C. Store two working temperatures on CH1 and CH2, lift the handle to wake the iron and set it down to put it to sleep. The kit ships with a C210-018 knife tip, a silicone and cotton insulated handle with about 150 cm of cable, and a multi-hole base for tip storage. Technicians at Mechanicpk choose it for SMD, connector and pad rework on dead phone and charging issue repairs.

Out of stock

12 People watching this product now!
Description

C210 Soldering Station for Mobile Repair: MaAnt HT-C210 Solder Iron Overview

The MaAnt HT-C210 Solder Iron gives a repair bench a compact C210 soldering station for mobile repair work where board space is tight and heat control decides the result. The station drives C210 cartridge tips, which carry the heating core inside the tip, so the iron reaches working temperature quickly and recovers fast when you drag across a ground plane. You set a value between 30°C and 500°C with the keys, store your two most common settings on CH1 and CH2, and move between tasks without touching the controls again. Mechanicpk supplies the HT-C210 to technicians and service centers across Pakistan who need precise, repeatable heat on SMD, connector and pad work.

Cartridge Heating and Temperature Control

C210 is a cartridge standard. The heater and the tip form one integrated unit, which shortens the thermal path between the element and the solder joint. The HT-C210 pairs that design with a 32-bit controller, and the manufacturer lists temperature error within 2 degrees. Heating power sits at 72W, fed by a 120W power supply, which suits fine phone-board work. The listing rates tin melting at about 2 seconds, so a charging port job does not leave you waiting between joints. Key-based temperature control spans 30°C to 500°C, so you cover low-heat work on flex pads and the higher settings that some solder alloys need. Fast recovery matters on phone boards. A thick ground plane pulls heat away from the joint, and a cartridge with the heater at the tip pushes heat back to the contact point right away. That behavior helps when you tin a pad, lift a shield-can ground or reflow a battery connector, where a sluggish iron tempts you to raise the temperature and risk lifting the pad.

Sleep Mode, Memory Channels and Bench Ergonomics

Lift the handle from the base and the iron wakes to your set temperature. Set the handle down and the dormancy line puts the iron to sleep automatically, so you never hunt for a button between boards. CH1 and CH2 hold two preset temperatures. Keep one for fine SMD parts and one for connectors, and switch with a single press. A silicone sleeve and a cotton sleeve insulate the grip, and about 150 cm of cable gives your hand room to move around a clamped board. The base includes extra holes that park spare tips, so tip changes and bench cleanup happen in one spot. You swap the integrated heating core and tip in about 2 seconds, which lets you move from a knife tip to a curved tip in the middle of a repair.

Where the HT-C210 Fits in Your Repair Workflow

A C210 iron delivers the most value as one stage in a sequence. A multimeter narrows a charging issue to a single line or component, a microscope confirms the lifted pad, and the HT-C210 then makes the joint. Clamp the board in a PCB holder so both hands stay free. When the job grows into IC change karna on a BGA chip, you move to a hot air station and a reballing kit, and the iron comes back for pad cleanup, tinning and jumper lagana. If a dead after flash phone turns out to be a hardware fault, ISP pinout tools, eMMC programmers, UFS adapters and test boxes handle the software side, while this iron handles the fine wire work to the test points. Technicians who outgrow a basic iron step up to a C210 station like this one before they invest in full rework equipment. Start at a lower temperature on flex and connector pads, then raise it only as the joint demands. Check each joint under magnification before you power the phone, because a cold joint on a charging line brings back the same fault you set out to fix. Keep the tip tinned between joints and park it in the base when you step away.

Tips, Power and Footprint

The HT-C210 accepts the C210 tip family. The C210-018 knife tip ships as the standard tip, and the C210-002 curved and C210-020 straight tips fit the same handle when your repair calls for a different angle. The host measures 143 x 142 x 42 mm with a 45 x 38 mm display, so it fits beside a microscope without crowding your workspace. The supply takes 100V to 240V AC, which covers Pakistani mains and travel jobs. The listing also specifies a tip-to-ground resistance below 2 ohms and tip-to-ground voltage below 2 mV, figures you care about when you work on boards with sensitive ICs. The package includes the host, a K-type tip, the handle, the base and the dormancy line. Order the MaAnt HT-C210 Solder Iron from Mechanicpk when you want a spec-led C210 station for your workshop. Shops that run several benches get consistent results from the CH1 and CH2 presets, since every technician starts from the same two temperatures instead of guessing. Training institutes can use the same presets to teach students a controlled soldering routine before they move on to hot air and BGA work.

Additional information
Weight1.49 kg
Q & A
Please login to post questions

Key Features

  • C210 cartridge design with the heating core integrated into the tip
  • Key temperature control from 30°C to 500°C
  • 32-bit controller with manufacturer-listed temperature error within 2 degrees
  • CH1 and CH2 memory channels for two preset temperatures
  • Automatic sleep when you set the handle down, wake when you lift it
  • Silicone and cotton sleeve insulated handle with about 150 cm cable
  • Multi-hole base for tip storage and quick tip changes
  • Wide 100V-240V AC input with C210-018 knife tip included

Specifications

BrandMaAnt
ModelHT-C210
CategorySoldering Stations & Irons
CompatibilityC210 cartridge tips (C210-002 curved, C210-018 knife, C210-020 straight)
Supported DevicesUniversal, not device-specific (mobile phone, tablet and laptop PCB repair)
TechnologyC210 cartridge standard with integrated heating core, 32-bit controller, key temperature control from 30°C to 500°C
MaterialSilicone handle with cotton sleeve
Input VoltageAC 100V-240V, DC 12V
Power Rating120W power supply, 72W heating power
DimensionsHost 143 x 142 x 42 mm

Common Repair Uses

  • SMD, connector and pad rework on mobile and PCB repair benches
  • SMD capacitor and resistor replacement on dead phone boards
  • Jumper lagana on broken tracks and lifted pads
  • Charging port and connector soldering for charging issue repairs
  • Battery connector and flex pad rework
  • Pad cleaning and tinning before IC placement
  • Shield-can ground and test-point wire soldering
  • Hardware fault tracing after multimeter and microscope inspection
  • Fine soldering practice for repair training

Compatible Devices

  • Universal soldering tool, not tied to a phone brand or chipset
  • Universal soldering tool, not tied to a phone brand or chipset
  • Smartphone mainboards from any brand
  • Tablet PCBs
  • Laptop PCBs
  • SMD components on phone and tablet boards
  • BGA-area board work (pad cleanup and tinning)
  • C210 cartridge tips: C210-018 knife (standard), C210-002 curved, C210-020 straight
  • 100V-240V AC mains supply

FAQ

What is the product name?
The product name is MaAnt HT-C210 Solder Iron.
What is the brand of this product?
The brand of this product is MaAnt.
What is the model of this product?
The model of this product is HT-C210.
What is this product used for?
This product is used for precision soldering on mobile phone, tablet and laptop PCBs, including SMD components, connectors and pad rework.
Which devices are compatible with this product?
This product is universal and not device-specific. It works on phone, tablet and laptop boards and accepts C210 cartridge tips.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Which tips fit the MaAnt HT-C210, and can I use 900M-style tips?
The HT-C210 uses the C210 cartridge standard, including C210-018 knife, C210-002 curved and C210-020 straight tips. 900M-style tips do not fit because C210 places the heater inside the tip.
What temperature range does the MaAnt HT-C210 cover, and how do CH1 and CH2 work?
Key control covers 30°C to 500°C. CH1 and CH2 store two preset temperatures you recall with one press.