Mechanic DS6 Solder Wire 0.3mm 40g 60/40 Rosin Core
₨ 350
Fine 0.3mm Rosin Core Solder Wire
Mechanic DS6 solder wire 0.3mm delivers a 60/40 tin-lead alloy with a rosin flux core in a compact 40g spool. The fine diameter gives you tight control over how much solder lands on mobile phone mainboard pads, flex connector terminals, and charging port joints. The flux core helps the solder wet copper quickly, leaving bright joints with low residue and little smoke at the iron tip. Use it for jumper wires, pad tinning, and touch-up work beside your soldering station or hot air station. Mechanicpk supplies the DS6 to repair technicians, workshops, and service centers across Pakistan.
Out of stock
Mechanic DS6 Solder Wire 0.3mm for Fine-Pitch Board Work
Mechanic DS6 solder wire 0.3mm gives your repair bench a fine-gauge, rosin-core 60/40 tin-lead wire in a 40g spool. The thin diameter lets you feed small, measured amounts of solder onto mobile phone mainboard pads, flex connector terminals, and jumper points without flooding the components next to them. Mechanicpk stocks the DS6 for technicians and service centers who want a predictable, low-residue consumable beside their soldering stations and hot air stations.
Alloy and Flux Core Behaviour
The DS6 combines a 60% tin and 40% lead alloy with a rosin flux core, and the flux content sits between 1.0% and 3.0%. Tin-lead alloys melt at a lower temperature than lead-free alternatives, so your iron reaches working heat quickly and the board spends less time under thermal stress. The rosin core cleans the copper pad as the wire melts, which helps the solder wet the surface and form a bright, smooth joint. You see little smoke and minimal spatter at the tip, so your microscope view stays clear and your joints stay tidy. The wire contains lead, so you should wash your hands after handling it and keep your bench ventilated.
Where Mechanic DS6 Solder Wire 0.3mm Fits Your Repair Workflow
A 0.3mm wire matches the pad sizes you meet on modern smartphone boards. You use it for jumper lagana on broken tracks, tinning pads before an IC change karna job, and rebuilding joints on charging ports, battery connectors, and sub-boards after a charging issue or dead phone diagnosis. The fine diameter also suits touch-up work after hot air rework, when you need to clean up a few stubborn joints without adding excess solder. Pair it with a quality flux, a PCB holder, and a microscope for consistent results, and check continuity with your multimeter once the joint cools. If you need a heavier feed for larger pads and wires, the DS6 line also lists a 0.4mm size.
Why Technicians Keep a 40g Spool on the Bench
The 40g spool stays compact enough for a drawer or tool tray, yet it holds enough wire for regular workshop volume. Shop owners can assign one spool per technician, track consumption easily, and reorder before the bench runs dry. The fine gauge also reduces waste, because you melt only the length you need for each joint instead of cutting off a thick bead. For repair shops that handle daily charging port, display connector, and jumper work, a reliable fine solder wire saves time on every ticket and keeps rework to a minimum.
| Weight | 0.40 kg |
|---|
Key Features
- ✓0.3mm fine diameter for tight control on small pads
- ✓60/40 tin-lead alloy for easy melting and flow
- ✓Rosin flux core with 1.0–3.0% flux content
- ✓Bright, smooth joints with low residue
- ✓Low smoke and minimal spatter at the iron tip
- ✓Compact 40g spool for bench and tool tray use
- ✓Suits standard soldering irons and soldering stations
- ✓Works for repair, rework, and new board assembly
Specifications
| Brand | Mechanic |
|---|---|
| Model | DS6 |
| Category | Solder Wire |
| Compatibility | Universal — not device-specific |
| Technology | Rosin core flux |
| Material | 60% Sn / 40% Pb alloy |
| Flux Content | 1.0–3.0% |
| Dimensions | Wire diameter 0.3mm |
| Weight | 40g |
Common Repair Uses
- ✓Fine-gauge soldering of pads, joints, and jumpers on mobile phone boards
- ✓Charging port pad and joint repair
- ✓Jumper wire soldering on broken tracks
- ✓Pad tinning before IC replacement
- ✓Battery connector joint repair
- ✓Touch-up after hot air rework
- ✓Flex connector terminal soldering
- ✓Sub-board joint repair
- ✓General PCB and micro-component soldering
Compatible Devices
- ✓Universal — works on any mobile phone or electronics PCB; not device-specific
- ✓Smartphone mainboards of any brand
- ✓Android phone sub-boards and charging boards
- ✓iPhone logic board pad and jumper repair
- ✓Tablet mainboards
- ✓Charging port and battery connector pads
- ✓Flex connector terminals on display and camera boards
- ✓Laptop and general electronics PCBs
- ✓Pre-tinned pads on boards prepared for IC replacement
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Is Mechanic DS6 solder wire leaded or lead-free?
Is the 0.3mm DS6 wire suitable for small pads and jumper work on mobile boards?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock
UFI eMMC BGA Soldering Adapter (8 Footprints) for UFI-Box
In stock



