Relife RL-056E OCA Glue Remover for Curved Screen

₨ 1

Cordless OCA Glue Remover

The Relife RL-056E clears OCA glue, original hard glue and curved screen adhesive with a motor-driven shaft, so your thumb stops doing the work. You pick one of six speed gears on the LED display, switch the motor between forward and reverse, and keep working under the built-in LED light. A Type-C rechargeable battery gives up to 16 hours of continuous use, and you can keep working while it charges. The tool weighs about 160 g and measures 220 x 40 x 40 mm, so it sits comfortably in the hand during long refurbishing sessions. Mechanicpk supplies it as an OCA glue remover for curved screen jobs in Pakistan.

Out of stock

18 People watching this product now!
Description

Relife RL-056E: OCA Glue Remover for Curved Screen Repair

Curved-screen refurbishing depends on how cleanly you clear the leftover adhesive. The Relife RL-056E is an OCA glue remover for curved screen work that replaces hand rubbing with a motor-driven shaft. Six speed gears give you control over how aggressively the glue lifts. You clean the glass edge, the border gap and the frame without chemicals. Mechanicpk stocks the RL-056E for repair shops that run screen refurbishment every day and need the same result from every bench.

Motor, Shaft and Control Layout

The glue removal shaft sits fixed at the centre of the motor. That coaxial layout keeps the shaft concentric and cuts the shake that wrecks a delicate glass edge. You switch gears from the LED gear display with a single button. A long press on the multifunction button turns on the LED light, which helps when you work on a dark corner of a curved panel. The motor runs forward and in reverse, so you can change the direction when the glue starts to ball up on the shaft. If you leave the tool idle for 10 seconds, it shuts itself off, and any key press starts it again.

Power comes from a built-in rechargeable lithium battery that charges over Type-C. The tool takes DC 4.2V input and delivers DC 3.7V output. A full charge gives up to 16 hours of continuous use and about 300 days of standby. You can run it wirelessly or plug it in and keep working while it charges, which suits a workshop that refurbishes several screens in one shift.

Glue Types and Screen Types You Can Clear

The RL-056E handles curved screen glue, cold-light screen glue, backlit screen glue, original hard glue and OCA adhesive. A distributor listing names Huawei, OPPO, Vivo and Xiaomi curved panels among the common targets. Treat the screen type and the glue type as your compatibility scope, because the tool is a universal glue remover and not tied to one phone model. On a display problem job, you separate the panel first. A hot air station or a screen separator softens the bond. Then you pick up the RL-056E to clear the residue from the frame and the border gap.

Where It Fits on Your Repair Bench

Glue removal sits between screen separation and screen rebonding. Residue left on the frame causes uneven lamination, air bubbles and light leaks on the new panel, so this step decides the quality of the final refurbishment. Pair the RL-056E with a microscope to check the edge for leftover adhesive. Add a PCB holder to keep the frame steady while you work. If your bench handles board-level hardware faults too, your Hot Air Stations and Soldering Stations stay within reach for the heat steps that come before and after glue cleaning. For technicians who started with manual scrapers, the RL-056E is the natural upgrade to a powered, speed-controlled glue removal tool.

Additional information
Weight0.160 kg
Q & A
Please login to post questions

Key Features

  • Six speed gears shown on an LED gear display
  • Forward and reverse motor rotation
  • Coaxial shaft fixed in the motor centre to reduce shake
  • Built-in LED light, switched on with a long press
  • Auto shut-off after 10 seconds without operation
  • Type-C charging, with use while charging
  • Up to 16 hours of continuous use per charge
  • Chemical-free glue removal that replaces hand rubbing

Specifications

BrandRelife
ModelRL-056E
CategoryGlue Removers / Mobile Repair Tools
CompatibilityUniversal glue remover for curved screen, cold-light screen, backlit screen, original hard glue and OCA glue
TechnologyHigh-speed motor with coaxial shaft, 6-speed LED gear display, forward and reverse rotation
MaterialPC + ABS
Input VoltageDC 4.2V
Output VoltageDC 3.7V
BatteryBuilt-in rechargeable lithium battery, 2000mAh
Charging InterfaceUSB Type-C
Continuous UseUp to 16 hours
Standby TimeUp to 300 days
Dimensions220 x 40 x 40 mm
WeightAbout 160 g

Common Repair Uses

  • Screen refurbishment and display problem repair
  • Curved screen glue removal
  • OCA glue removal from the glass and frame
  • Original hard glue removal
  • Cold-light screen adhesive cleaning
  • Backlit screen adhesive cleaning
  • Border gap cleaning on the frame
  • Frame preparation before screen rebonding
  • Night or low-light glue removal with the LED light

Compatible Devices

  • Universal scope, covering screen and glue types rather than specific phone models
  • Curved-edge phone screens
  • Huawei curved screens
  • OPPO curved screens
  • Vivo curved screens
  • Xiaomi curved screens
  • Cold-light screens
  • Backlit screens
  • Screens with OCA or original hard glue

FAQ

What is the product name?
The product name is Relife RL-056E All In One Intelligent Glue Remover for Curved Screen.
What is the brand of this product?
The brand of this product is Relife.
What is the model of this product?
The model of this product is RL-056E.
What is this product used for?
This product removes OCA glue, original hard glue and curved screen adhesive from phone screens and frames during screen refurbishment.
Which devices are compatible with this product?
The tool works on screen and glue types, not on specific phone models. It covers curved screens, cold-light screens, backlit screens, and OCA or original hard glue.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
How long does the RL-056E run on one charge?
The RL-056E runs up to 16 hours of continuous use on one charge and holds about 300 days of standby. It charges over USB Type-C.
Can I use the RL-056E while it charges, and does it switch off by itself?
Yes, you can use it wirelessly or while it charges. The tool shuts itself off after 10 seconds without operation, and any key press starts it again.