Mechanic BY001 Pressure Retention Mold – 360° Fixture

₨ 6,800

360° Rotary Screen Pressure Holder

The Mechanic BY001 Pressure Retention Mold clamps a phone under steady, even pressure while screen or back cover adhesive sets. A curved-surface rotary head turns a full 360°, so you angle the phone to the seam you are working on instead of repositioning the whole device. High-strength steel construction, a spring-backed pressure plate, and soft sponge and silicone pads keep the load firm without harming the glass. A stainless steel rail and removable chassis give you a clear view of the phone while you press. Repair shops in Pakistan use it for main screen bonding, back cover re-gluing, and seam filling.

Out of stock

14 People watching this product now!
Description

Pressure Retention Mold for Mobile Repair: Mechanic BY001 on Your Bench

A pressure retention mold for mobile repair decides whether a glued screen or back cover sits flat or lifts at the corners a day later. The Mechanic BY001 Pressure Retention Mold gives your bench a steel fixture that holds the phone under steady, even pressure for the full adhesive cure. Its curved-surface rotary design turns a full 360° without stopping, so you reach every edge from one clamped position. Mechanic builds the BY001 around a metal retaining spring and soft contact pads, which keeps the load firm on the housing and the glass protected. If you handle screen replacements and back cover jobs every day, this fixture gives you a repeatable result with fewer reworks.

How the 360° Rotary Pressure Head Works

The curved-surface rotary head is the core of the BY001. It rotates infinitely through 360°, so you turn the phone to the seam you want to press instead of unclamping and repositioning the device. High-strength steel gives the body a tight fit and keeps it from flexing under load. A metal retaining spring supports the pressure plate, stretches well, and carries a rating of 50,000 pressing cycles, which suits a workshop that presses phones all day. An anti-wear sponge pad and a silicone pad sit between the plate and the phone, so the force spreads evenly across the screen and the pads do not harm the glass. A stainless steel rail and a removable chassis let you place the phone on top with a clear view of the work area. You place the phone, lower the plate, and the spring maintains the load while the adhesive cures, so your hands stay free for the next job on the bench.

Where It Fits in a Screen and Back Cover Repair Workflow

The BY001 handles the step that comes after the board and parts work finish. Say a customer brings in a phone with a display problem. You lift the old screen with a hot air station, clean the frame, test the new panel, and apply fresh adhesive. Then you seat the panel in the frame and clamp the phone in the fixture so the glue cures under even pressure. Back cover jobs follow the same routine: after a charging issue or hardware fault repair, you close the housing, set it in the BY001, and let the bond cure flat. The fixture serves glued main screens and glued back covers on multiple mobile phone designs, and it helps you fill seams while the adhesive sets. The anti-wear pads keep the pressure uniform, which matters on large panels where uneven force leaves a visible gap along one edge. Keep PCB Holders and Microscopes at the bench for the board-level steps, and reserve the BY001 for the final bonding stage.

Why Technicians and Repair Shops Choose This Fixture

Consistent pressure separates a clean finish from a customer who returns with a lifting corner. Metal construction keeps the fixture stable on the bench, and the pads protect the screen while the plate presses, so you work with confidence instead of stacking improvised weights on a phone. The 50,000-cycle spring rating means one fixture covers high-volume weeks at a service center without constant replacement. A fixture like this also builds a routine your junior technicians can follow: clamp, wait, inspect. That habit cuts comebacks and protects your shop’s reputation. The package contains one fixture, ready for the bench. Repair shops in Pakistan that already run Soldering Stations, Hot Air Stations, and Microscopes can add a pressure retention mold for mobile repair like the BY001 to complete the screen and back cover side of the workflow in the same workspace.

Additional information
Weight2.25 kg
Q & A
Please login to post questions

Key Features

  • Curved-surface rotary pressure holding mold with 360° infinite rotation
  • High-strength steel body with a tight fit
  • Metal retaining spring supports the pressure plate and stretches well
  • Spring supports 50,000 pressing cycles
  • Anti-wear sponge pad spreads force uniformly across the screen
  • Silicone pad protects the screen during pressing
  • Stable metal construction that stays put on the bench
  • Stainless steel rail and removable chassis for clear visibility

Specifications

BrandMechanic
ModelBY001
CategoryPCB Fixtures (screen and back cover pressure holding fixture)
CompatibilityGlued main screens and glued back covers on multiple mobile phones
TechnologyCurved-surface rotary pressure holding, 360° infinite rotation, spring-supported pressure plate
MaterialHigh-strength steel and metal body, anti-wear sponge pad, silicone pad, stainless steel rail
Weight2.25 kg

Common Repair Uses

  • Pressure holding during screen and back cover bonding
  • Main screen bonding after screen replacement
  • Back cover re-gluing after housing or charging port repair
  • Seam filling while adhesive sets
  • Holding a phone steady and flat during adhesive cure
  • Pressing from any angle using the 360° rotary head
  • Applying even force through sponge and silicone pads without harming the screen
  • High-volume daily pressing, with the spring rated for 50,000 cycles
  • Final bonding stage after hot air and board-level work

Compatible Devices

  • Universal fixture for multiple mobile phones with glued main screens and glued back covers (not tied to one brand or model)
  • Mobile phones with adhesive-bonded back covers
  • Mobile phones with glued main screen assemblies
  • Multiple phone brands and models, universal scope
  • Devices that need uniform pressure while adhesive cures

FAQ

What is the product name?
The product name is Mechanic BY001 Pressure Retention Mold.
What is the brand of this product?
The brand of this product is Mechanic.
What is the model of this product?
The model of this product is BY001.
What is this product used for?
This product is used for holding mobile phone screens and back covers under even pressure while adhesive sets.
Which devices are compatible with this product?
This product is compatible with multiple mobile phones that have glued main screens and glued back covers.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the Mechanic BY001 rotate fully to press different phone edges?
Yes. The curved-surface rotary head rotates infinitely through 360°, so you turn the phone to any seam without unclamping it.
How many pressing cycles does the BY001 retaining spring support?
The metal retaining spring supports 50,000 pressing cycles.