Qianli Bumblebee Stencil (QS72) EMMC/EMCP Reballing
₨ 999
eMMC eMCP Reballing Stencil
The Qianli Bumblebee Stencil (QS72) EMMC/EMCP gives your bench a dedicated eMMC eMCP reballing stencil from the Qianli Bumblebee series. It targets eMMC and eMCP memory chips, the storage packages found on the boards of many Android phones and tablets. You lift the chip, clean the pads, align the stencil, and rebuild the solder ball grid in one clean pass. Universal fitment ties the stencil to the chip package, not to a single phone model, so one stencil serves many boards. Pair it with your hot air station, flux, and solder balls to restore a solid BGA joint on dead phone and dead after flash cases.
In stock
Qianli Bumblebee Stencil (QS72) for eMMC and eMCP Reballing
The Qianli Bumblebee Stencil (QS72) EMMC/EMCP is an eMMC eMCP reballing stencil for technicians who rework memory chips at BGA level. Qianli lists it as a reballing stencil for eMMC and eMCP with universal fitment, so you choose it by chip package, not by phone model. An eMMC chip packs NAND flash and its controller into one package, and an eMCP chip adds LPDDR RAM to that same package. Both sit on the board as a dense ball grid, and both need even solder balls after every removal. This stencil gives you the template to rebuild that grid on your own repair bench.
Where the QS72 Fits in an eMMC Repair Workflow
Most eMMC jobs begin with a dead phone, a boot loop issue, or a hang on logo that software cannot cure. Pakistani workshops meet these faults daily, including dead after flash cases and boards where the storage chip fails to read. You confirm the fault with a multimeter and a test box or programmer, then decide whether the storage chip needs to come off. When it does, you heat the chip with a hot air station, lift it, and clear old solder from the chip and the pads under a microscope. The QS72 enters at the reballing step. You hold the chip in a reballing kit or PCB holder, lay the stencil over the contacts, press solder through the apertures, and reflow. Then you reseat the chip and reprogram it with an eMMC programmer or through ISP pinout work, depending on the board. The stencil covers one job in that chain, so it works beside your soldering station, flux, and cleaning supplies, never in place of them.
What eMMC and eMCP Packages Demand From a Stencil
Memory packages punish sloppy reballing. One missing ball leaves a dead connection, and one bridged pair can short a data line, which often shows up as a phone that powers on but never leaves the logo. A stencil places every ball in the same position across the grid, so you stop judging spacing by eye. Because eMCP adds LPDDR memory to the eMMC package, one repair can touch both storage and RAM. Qianli covers both package families under the single QS72 model number. Before you apply heat, compare the chip’s ball layout with the stencil’s aperture pattern and check the alignment under magnification. A stencil that sits even slightly off gives you a shifted grid and a second reball.
Why Technicians Pick the QS72 for eMMC Work
Universal fitment changes how you stock your bench. A stencil made for one phone model sits idle when that model stops arriving, while a package-based stencil like the QS72 keeps earning its place on every board whose storage chip matches. It suits workshops that replace and reball eMMC chips regularly, and service centers that want one dependable stencil for a recurring job. As your volume grows, you can step up to a full reballing kit with a holding platform, or add a stronger hot air station and a better microscope for cleaner results. Mechanicpk stocks those tools in the same catalog, so you build your setup in stages. Qianli’s Bumblebee range also covers other chip families, which lets you stay with one brand’s stencils as your repair list expands.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Qianli Bumblebee series reballing stencil, model QS72
- ✓Covers both eMMC and eMCP chips under one model number
- ✓Universal fitment: chosen by chip package, not by phone model
- ✓Rebuilds the ball grid on storage and memory chips after removal
- ✓Fits standard hot air BGA reflow work on your repair bench
- ✓Supports board-level fixes for dead phone, boot loop issue, and hang on logo faults
- ✓One stencil serves many Android and tablet boards that carry eMMC or eMCP
- ✓Works with reballing kits, PCB holders, and microscopes already on your bench
Specifications
| Brand Entity | Qianli |
|---|---|
| Product Entity | Qianli Bumblebee Stencil (QS72) EMMC/EMCP |
| Technology Entity | BGA reballing, eMMC, eMCP |
| Compatible Device Entities | Android phones and tablets with eMMC or eMCP storage |
| Repair Process Entity | eMMC reballing, memory chip rework |
| Industry Entity | Mobile phone repair, PCB repair |
Common Repair Uses
- ✓Reballing eMMC and eMCP chips at board level
- ✓Reballing an eMMC chip after removal
- ✓Reballing an eMCP chip after removal
- ✓Rebuilding the ball grid during eMMC replacement jobs
- ✓Reballing the storage chip on a dead phone before reprogramming
- ✓Rebuilding the ball grid for boot loop issue and hang on logo repairs
- ✓Reballing the storage chip for dead after flash recovery
Compatible Devices
- ✓Universal fitment, matched by eMMC/eMCP chip package, not by phone model
- ✓eMMC memory chips
- ✓eMCP memory chips
- ✓Android phones with eMMC storage
- ✓Android phones with eMCP memory
- ✓Tablets with eMMC or eMCP storage
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
Does the Qianli QS72 work for both eMMC and eMCP chips?
How do I confirm the QS72 matches my eMMC chip before reballing?
Related products
ICFRIEND UFS eMMC ISP Adapter for MiPi Tester & F64 Box
In stock



