Qianli Bumblebee Stencil (QS73) NAND Flash
₨ 799
Qianli QS73 NAND BGA Reballing Stencil
The Qianli Bumblebee Stencil (QS73) NAND Flash gives your bench a single reballing stencil for eleven NAND flash BGA layouts: BGA 107, 95, 182, 202, 130, 199, 137, 63, 127, 134 and 67. You match the stencil to your chip’s footprint, place your solder balls, and reflow with your hot air station. It suits technicians who handle dead phone and dead after flash boards with a NAND hardware fault, and shops that want one dependable stencil in place of many. Mechanicpk supplies the QS73 to repair professionals across Pakistan.
In stock
Qianli QS73 NAND BGA Reballing Stencil for Board-Level Memory Work
The Qianli Bumblebee Stencil (QS73) NAND Flash gives you one reballing stencil for eleven NAND flash BGA layouts. If your bench handles dead phone boards that trace back to a damaged or lifted NAND chip, this Qianli QS73 NAND BGA reballing stencil replaces a drawer of single-purpose stencils with one piece you reach for on most memory jobs. Mechanicpk supplies it to technicians, repair shops and service centers across Pakistan who already run hot air rework and want repeatable ball placement on memory chips.
Package Coverage Verified for NAND Flash
The manufacturer-listed scope covers BGA 107, BGA 95, BGA 182, BGA 202, BGA 130, BGA 199, BGA 137, BGA 63, BGA 127, BGA 134 and BGA 67 NAND flash packages. Check that list against the chip on your board before you order. A stencil only works when its aperture pattern matches the footprint of the chip you reball, so identify your NAND’s package, count its ball layout, and confirm the package number appears above. This page claims nothing beyond those eleven package types, so you can judge the fit with confidence. The stencil belongs to Qianli’s Bumblebee range, a name you will already know from other bench tools.
Where It Fits in a NAND Repair Workflow
Technicians usually meet NAND faults as a dead phone, a boot loop issue, a hang on logo case, or a board that went dead after flash. When a software reflash fails and your diagnosis points to a hardware fault in memory, the job moves to chip level. You lift the NAND with a hot air station, clean the pads with a soldering station and desoldering wick, and check the board with a multimeter. Then the stencil does its work. It holds the ball pattern in position while you place solder balls on the cleaned chip, so every ball sits where the footprint demands before reflow. A PCB holder keeps the board steady, and a microscope lets you inspect each ball before the chip goes back on the board. After the NAND sits in place, you reprogram or flash the device through your eMMC programmer, UFS adapter or ISP pinout tool and run a final function test.
Why Technicians Stock the QS73
Coverage drives the buying decision. Eleven package layouts on one stencil mean fewer purchases, less bench clutter and faster setup when a NAND job lands on your desk. Service centers that handle mixed brands such as Samsung, Oppo, Vivo, Infinix and Tecno benefit most, because a board from any of them can carry one of these package styles. If you already own a reballing kit, the QS73 fills the NAND-specific gap in it. If you build your rework station from scratch, pair it with a hot air station, a microscope and a quality solder ball set, then add programmers and test boxes as your workload grows. Training institutes can also use it to teach students the full lift, clean, ball and reflow sequence on real NAND packages.
| Weight | 0.1 kg |
|---|
Key Features
- ✓Reballing stencil from Qianli’s Bumblebee range
- ✓Model QS73 built for NAND flash chips
- ✓Covers 11 BGA package layouts on one stencil
- ✓Supports BGA 107, 95, 182, 202, 130, 199, 137, 63, 127, 134 and 67
- ✓Suits hot air rework and reballing workflows
- ✓Fits dead phone and hardware fault repair jobs
- ✓Reduces the number of single-purpose stencils on your bench
- ✓Works with reballing kits, microscopes and PCB holders
Specifications
| Brand | Qianli |
|---|---|
| Model | QS73 |
| Category | BGA Reballing Stencil (NAND Flash) |
| Compatibility | NAND flash BGA packages 107, 95, 182, 202, 130, 199, 137, 63, 127, 134 and 67 |
Common Repair Uses
- ✓Reballing NAND flash chips during board-level mobile phone repair.
- ✓Reballing a NAND chip after removal from a dead phone board
- ✓Restoring solder balls on a lifted or damaged NAND chip
- ✓Preparing a replacement NAND chip before fitting it on the board
- ✓Reballing after pad cleaning and residue removal
- ✓Memory-chip replacement on a dead after flash board with a hardware fault
- ✓Chip-level repair on boot loop and hang on logo boards with a NAND fault
- ✓Reball practice and technician training on real NAND packages
- ✓Rework jobs where a hot air station, microscope and PCB holder work together
Compatible Devices
- ✓NAND flash chips in BGA 107, 95, 182, 202, 130, 199, 137, 63, 127, 134 and 67 packages. Coverage is package-based, not phone-model specific, so match your chip’s footprint to this list.
- ✓BGA 63 NAND flash package
- ✓BGA 67 NAND flash package
- ✓BGA 95 NAND flash package
- ✓BGA 107 NAND flash package
- ✓BGA 127 NAND flash package
- ✓BGA 130 NAND flash package
- ✓BGA 134 NAND flash package
- ✓BGA 137, 182, 199 and 202 NAND flash packages



