Relife RL-088 Tin Planting Magnetic Fixture Mat

₨ 1

Magnetic Tin Planting Fixture for PCB Work

The Relife RL-088 tin planting fixture gives your bench a stable, heat-resistant platform for BGA reballing and general soldering on mobile motherboards. Built-in high-temperature magnets deliver strong magnetic adsorption and high positioning accuracy, and the hold stays constant under heat. The new high-temperature silicone material resists chemical corrosion and wear, carries anti-static protection, and adds flame-retardant safety during long rework sessions. The double-sided, dual-use design adapts to PCBs of different sizes and shapes, so one fixture covers most boards that reach your repair bench. Light and compact, it moves from the workshop to a service counter without effort.

Out of stock

13 People watching this product now!
Description

Relife RL-088 Tin Planting Fixture for Precise BGA Reballing

The Relife RL-088 tin planting fixture targets one job: keeping your work steady while the heat is on. Relife built it as a magnetic, double-sided platform, so you position the work once and keep both hands on the iron, the hot air gun, and the microscope instead of chasing a board across the bench. If you handle BGA reballing on mobile motherboards every day, a dependable fixture turns a fiddly step into a repeatable one.

Magnetic Hold That Survives Heat

Ordinary mats lose grip or warp once a hot air station pushes the temperature up. The RL-088 uses built-in high-temperature resistant magnets, and the product listing describes strong magnetic adsorption that stays constant under extreme heat. That consistency gives you high positioning accuracy through the whole tin planting cycle, from the first pass of solder paste to the final reflow check. The heat-resistant base protects your work surface, and the anti-static construction helps shield delicate ICs from electrostatic discharge while you handle them.

Materials Built for Rework Conditions

Relife makes the fixture from a new high-temperature silicone material with flame-retardant properties. Flux, cleaning solvents, and repeated heat cycles wear down cheap mats quickly, so the listed resistance to chemical corrosion and wear matters on a bench that runs reflow work daily. You get a surface designed for the real conditions of PCB repair, not a general-purpose craft mat.

Universal Fit for Different Boards

Motherboard outlines vary widely between handsets, and a rigid single-size holder forces you to improvise. The RL-088 accommodates PCBs and components of various sizes and shapes, and the double-sided, dual-use design lets you switch orientation to match the task. Use it for general BGA tin planting, for soldering and desoldering, and for holding boards during assembly.

Where It Fits in Your Repair Workflow

A dead phone or a hardware fault often traces back to a lifted or damaged BGA IC. You remove the chip, clean the pads, and reball it. The RL-088 supports the tin planting step of that sequence, where a loose or drifting setup ruins a ball pattern. Build a complete BGA station around it with a reballing kit, a hot air station, a soldering station, and a microscope. Confirm your result with a multimeter after the chip goes back on the board. As your workload grows, you can step up to dedicated PCB holders for multi-board jobs.

Lightweight and compact, the fixture travels easily between a workshop bench and a service counter. Technicians, repair shop owners, and service centers in Pakistan get a practical accessory that improves consistency at one of the most precision-sensitive steps in IC-level repair.

Additional information
Weight0.3 kg
Q & A
Please login to post questions

Key Features

  • Built-in high-temperature resistant magnets
  • Strong magnetic adsorption that stays constant under heat
  • High positioning accuracy for tin planting
  • Heat-resistant base that protects the work surface
  • Anti-static protection
  • New high-temperature silicone, flame-retardant material
  • Strong resistance to chemical corrosion and wear
  • Double-sided, dual-use design in a lightweight, portable body

Specifications

BrandRELIFE
ModelRL-088
CategorySoldering Accessories – Tin Planting Fixture
CompatibilityUniversal – PCBs and components of various sizes and shapes
TechnologyBuilt-in high-temperature resistant magnets with strong magnetic adsorption
MaterialHigh-temperature silicone

Common Repair Uses

  • Verified workflows where this fixture supports the bench
  • General tin planting of BGA chips
  • BGA reballing support
  • Soldering on motherboards of different shapes
  • Desoldering work on PCBs
  • Holding boards steady during assembly
  • Hot air rework with heat-resistant magnetic positioning

Compatible Devices

  • Universal – not device-specific; suits PCBs and motherboards of various sizes and shapes
  • Mobile phone motherboards of different shapes
  • PCBs of various sizes
  • BGA chips (general tin planting)
  • Electronic components requiring soldering or desoldering
  • Boards held during assembly work
  • Double-sided use in either orientation

FAQ

What is the product name?
The product name is Relife RL-088 Tin Planting Universal Magnetic Fixture Mat.
What is the brand of this product?
The brand of this product is RELIFE.
What is the model of this product?
The model of this product is RL-088.
What is this product used for?
This product holds work steady for BGA tin planting, soldering, and desoldering on PCBs and mobile motherboards.
Which devices are compatible with this product?
This product is universal and not device-specific. It accommodates PCBs and components of various sizes and shapes.
Who should use this product?
This product is suitable for mobile repair technicians, repair shops, service centers, and professional users.
Does the magnetic hold stay stable under hot air heat?
The product uses built-in high-temperature resistant magnets, and the listing describes strong magnetic adsorption that stays constant under extreme heat.
Can I use the Relife RL-088 for BGA tin planting?
Yes. The fixture is listed for general tin planting of BGA chips and for soldering and desoldering PCBs of various sizes and shapes.