Relife TF1 Mini Glass Fixture – Heat-Insulating PCB Holder
₨ 1
Relife TF1 Mini Heat-Insulating Fixture
The Relife TF1 Mini glass fixture holds a mobile motherboard steady during hot air rework, IC removal and chip degumming. A tempered glass panel handles 500℃+ without deformation. The inward bevel design suspends the board above the glass, which cuts heat loss through conduction and shortens desoldering time. Two-way sliding clamps with knob adjustment lock motherboards in place, and the universal chip slot also holds standalone chips, CPUs and hard disk ICs. At 142 g net, the fixture stays compact enough for any repair bench or service-center toolkit. Mechanicpk supplies the Relife TF1 Mini to technicians and repair shops across Pakistan.
Out of stock
Relife TF1 Mini Glass Fixture for Controlled Motherboard Rework
The Relife TF1 Mini glass fixture holds a mobile motherboard clear of your bench while hot air does the work. RELIFE builds the clamp around a tempered glass panel that handles 500℃+ without deformation, and two sliding clamp axes let you lock a board in place with the knobs. You free both hands for the hot air gun and tweezers, and the board stays put through every pass. In a rework setup, this heat-insulating PCB holder sits beside your hot air station, soldering station and microscope as the piece that keeps the board steady.
Heat Insulation Through Suspended Clamping
An inward bevel design grips the board edges and leaves the motherboard suspended above the glass. That gap matters when you run a hot air gun. A board resting flat on a metal bench pulls heat away through conduction, and your IC takes longer to reach reflow temperature. Suspended clamping cuts that heat loss, so desoldering finishes faster and the surrounding board takes less thermal stress. The glass panel resists 500℃+ across long sessions without warping, and it does not corrode. Flux residue and glue debris wipe off in one pass, so the fixture stays clean between jobs. The fixture works purely mechanically, with no power input, no heater and no cable to manage on your bench.
Two-Way Movement and Universal Chip Slot
The TF1 Mini adjusts along two directions, which lets you fit a wide spread of motherboard shapes without hunting for a different holder. Knob clamping moves the sliders smoothly with no sticking, and the grip stays firm once you tighten. The universal chip slot structure positions a board quickly and also holds standalone chips, CPUs, hard disk ICs and other ICs, so one fixture covers phone boards and loose components. At 142 g net, the fixture stays compact and portable. You can carry it between workstations or pack it with your rework kit when you take a job on site. One fixture ships in the box, ready for the bench.
Where the TF1 Mini Fits in Your Repair Workflow
Most technicians reach for this fixture at the start of board-level work. When a dead phone needs an IC change karna job, you clamp the board, bring in the hot air gun, lift the chip and clean the pads under the microscope. For chip degumming, the stable hold lets you remove glue around a CPU or memory IC without shifting the board. When you reball a BGA chip, the fixture keeps the board level while you place the stencil and heat the balls. After rework, you test continuity with a multimeter and confirm the fault is gone before you close the phone.
Pair the TF1 Mini with Reballing Kits, Hot Air Stations and Soldering Stations to cover the full rework chain from chip removal to final testing. If your bench handles larger boards, the Relife TF2 Plus steps up in size and weight within the same glass-fixture family, and the wider PCB Holders range lets you build the right mix for your shop.
Repair shop owners and service centers value a fixture that every technician on the bench can set up in seconds. The TF1 Mini keeps its clamp action simple, so a new technician learns it on the first board and repeats the same stable hold on every job after that.
| Weight | 0.142 kg |
|---|
Key Features
- ✓Tempered glass panel that handles 500℃+ without deformation
- ✓Inward bevel design that suspends the motherboard above the glass
- ✓Two-way movement for a wide range of board shapes
- ✓Knob clamping with smooth, non-sticking sliders
- ✓Universal chip slot structure for quick positioning
- ✓Holds chips, CPUs, hard disk ICs and other ICs
- ✓Wipe-clean glass surface that resists corrosion
- ✓Compact, portable body at 142 g net
Specifications
| Brand | RELIFE |
|---|---|
| Model | TF1 Mini |
| Category | PCB Holder / Motherboard Fixture |
| Compatibility | Mobile phone motherboards, tablet and iPad boards, chips, CPUs and hard disk ICs |
| Technology | Heat-insulating tempered glass panel with inward bevel, two-way sliding clamp and universal chip slot |
| Material | Tempered glass panel |
| Weight | 142 g (net) |
Common Repair Uses
- ✓Board-level clamping during hot air rework and chip-level work.
- ✓IC removal and IC change karna
- ✓Chip degumming
- ✓Desoldering with hot air
- ✓BGA reballing
- ✓CPU chip clamping
- ✓Motherboard repair on dead phone boards
- ✓Glue removal around memory and CPU ICs
- ✓General motherboard soldering and rework
Compatible Devices
- ✓Universal clamp, not device-specific. It holds mobile phone motherboards, tablet and iPad boards, and standalone ICs within its adjustable clamping range.
- ✓Mobile phone motherboards (general scope)
- ✓Tablet motherboards
- ✓iPad motherboards
- ✓Standalone mobile phone chip ICs
- ✓BGA CPU chips
- ✓Hard disk ICs
- ✓Other IC chips that fit the universal chip slot
FAQ
What is the product name?
What is the brand of this product?
What is the model of this product?
What is this product used for?
Which devices are compatible with this product?
Who should use this product?
What temperature can the Relife TF1 Mini glass panel handle during hot air rework?
Can the Relife TF1 Mini hold standalone chips and CPUs as well as full phone motherboards?
Related products
JZQ-599B Soldering Iron Tip Cleaner with Tin Cleaning Ball
Out of stock
QIANLI 008 Cutting Knife Blade for BGA Underfill Removal
Out of stock
Qianli 011 16-in-1 Glue Removal Knife for Mobile Repair
Out of stock



